[PATCH] drm/amd/pm: disallow the fan setting if there is no fan on smu13

[Lazar, Lijo]

On 8/8/2023 3:56 PM, Feng, Kenneth wrote:
> [AMD Official Use Only - General]
> 
> Currently no_fan is determined in sw init.
>      if (!smu->ppt_funcs->get_fan_control_mode)
>          smu->adev->pm.no_fan = true;
> 
> This is the case that some boards have fans and some don't have.
> smu->ppt_funcs->get_fan_control_mode still need to be defined.
> !smu_cmn_feature_is_supported(smu, SMU_FEATURE_FAN_CONTROL_BIT) is enough to get the fan capability.
> Not sure if it's better to depend on pm.no_fan.

What I meant is, based on fan control feature bit you could set 
pm.no_fan flag.

When pm.no_fan is set, we won't create hwmon fan attributes for 
get/set[1]. That way you could avoid the other checks also. Also when 
PMFW is not controlling, it's not guaranteed that the fan controller is 
initialized correctly for get to return correct speed/pwm.

[1] 
https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/amd/pm/amdgpu_pm.c#L3338

Thanks,
Lijo

> Thanks.
> 
> 
> 
> -----Original Message-----
> From: Lazar, Lijo <Lijo.Lazar at amd.com>
> Sent: Tuesday, August 8, 2023 6:12 PM
> To: Feng, Kenneth <Kenneth.Feng at amd.com>; amd-gfx at lists.freedesktop.org
> Cc: Arif, Maisam <Maisam.Arif at amd.com>
> Subject: Re: [PATCH] drm/amd/pm: disallow the fan setting if there is no fan on smu13
> 
> 
> 
> On 8/8/2023 1:21 PM, Kenneth Feng wrote:
>> disallow the fan setting if there is no fan on smu13
>>
>> Signed-off-by: Kenneth Feng <kenneth.feng at amd.com>
>> ---
>>    drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c | 9 ++++++---
>>    1 file changed, 6 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
>> index 9b62b45ebb7f..09ef0a7e7679 100644
>> --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
>> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
>> @@ -1131,7 +1131,9 @@ smu_v13_0_display_clock_voltage_request(struct smu_context *smu,
>>
>>    uint32_t smu_v13_0_get_fan_control_mode(struct smu_context *smu)
>>    {
>> -     if (!smu_cmn_feature_is_enabled(smu, SMU_FEATURE_FAN_CONTROL_BIT))
>> +     if (!smu_cmn_feature_is_supported(smu, SMU_FEATURE_FAN_CONTROL_BIT))
>> +             return AMD_FAN_CTRL_NONE;
> 
> If there is no PMFW fan control, isn't it better to set pm.no_fan?
> 
> Thanks,
> Lijo
> 
>> +     else if (!smu_cmn_feature_is_enabled(smu, SMU_FEATURE_FAN_CONTROL_BIT))
>>                return AMD_FAN_CTRL_MANUAL;
>>        else
>>                return AMD_FAN_CTRL_AUTO;
>> @@ -1143,7 +1145,7 @@ smu_v13_0_auto_fan_control(struct smu_context *smu, bool auto_fan_control)
>>        int ret = 0;
>>
>>        if (!smu_cmn_feature_is_supported(smu, SMU_FEATURE_FAN_CONTROL_BIT))
>> -             return 0;
>> +             return -EINVAL;
>>
>>        ret = smu_cmn_feature_set_enabled(smu, SMU_FEATURE_FAN_CONTROL_BIT, auto_fan_control);
>>        if (ret)
>> @@ -1204,7 +1206,8 @@ smu_v13_0_set_fan_control_mode(struct smu_context *smu,
>>
>>        switch (mode) {
>>        case AMD_FAN_CTRL_NONE:
>> -             ret = smu_v13_0_set_fan_speed_pwm(smu, 255);
>> +             if (smu_cmn_feature_is_supported(smu, SMU_FEATURE_FAN_CONTROL_BIT))
>> +                     ret = -EINVAL;
>>                break;
>>        case AMD_FAN_CTRL_MANUAL:
>>                ret = smu_v13_0_auto_fan_control(smu, 0);