[PATCH 21/47] drm/amd/display: add MPC MCM 1D LUT clock gating programming

[Rodrigo Siqueira]

From: Yihan Zhu <yihan.zhu at amd.com>

Missing clock gating programming blocks memory power on from boot up.

Reviewed-by: Chris Park <chris.park at amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira at amd.com>
Signed-off-by: Yihan Zhu <yihan.zhu at amd.com>
---
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c               | 3 ++-
 drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c
index 994b21ed272f..e789e654c387 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c
@@ -71,12 +71,13 @@ void mpc32_power_on_blnd_lut(
 {
 	struct dcn30_mpc *mpc30 = TO_DCN30_MPC(mpc);
 
+	REG_SET(MPCC_MCM_MEM_PWR_CTRL[mpcc_id], 0, MPCC_MCM_1DLUT_MEM_PWR_DIS, power_on);
+
 	if (mpc->ctx->dc->debug.enable_mem_low_power.bits.cm) {
 		if (power_on) {
 			REG_UPDATE(MPCC_MCM_MEM_PWR_CTRL[mpcc_id], MPCC_MCM_1DLUT_MEM_PWR_FORCE, 0);
 			REG_WAIT(MPCC_MCM_MEM_PWR_CTRL[mpcc_id], MPCC_MCM_1DLUT_MEM_PWR_STATE, 0, 1, 5);
 		} else if (!mpc->ctx->dc->debug.disable_mem_low_power) {
-			ASSERT(false);
 			/* TODO: change to mpc
 			 *  dpp_base->ctx->dc->optimized_required = true;
 			 *  dpp_base->deferred_reg_writes.bits.disable_blnd_lut = true;
diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c
index 1a0ed1c7e2d4..13324422ff50 100644
--- a/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c
@@ -736,7 +736,7 @@ static const struct dc_debug_options debug_defaults_drv = {
 			.i2c = true,
 			.dmcu = false, // This is previously known to cause hang on S3 cycles if enabled
 			.dscl = true,
-			.cm = false,
+			.cm = true,
 			.mpc = true,
 			.optc = true,
 			.vpg = true,
-- 
2.42.0