[PATCH 10/13] drm/amd/display: For prefetch mode > 0, extend prefetch if possible

[Aurabindo Pillai]

From: Alvin Lee <alvin.lee2 at amd.com>

[Description]
For mode programming we want to extend the prefetch as much as possible
(up to oto, or as long as we can for equ) if we're not already applying
the 60us prefetch requirement. This is to avoid intermittent underflow
issues during prefetch.

The prefetch extension is applied under the following scenarios:
1. We're in prefetch mode 1 (i.e. we don't support MCLK switch in blank)
2. We're using subvp or drr methods of p-state switch, in which case we
   we don't care if prefetch takes up more of the blanking time

Mode programming typically chooses the smallest prefetch time possible
(i.e. highest bandwidth during prefetch) presumably to create margin between
p-states / c-states that happen in vblank and prefetch. Therefore we only
apply this prefetch extension when p-state in vblank is not required (UCLK
p-states take up the most vblank time).

Reviewed-by: Jun Lei <jun.lei at amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai at amd.com>
Signed-off-by: Alvin Lee <alvin.lee2 at amd.com>
---
 .../dc/dml/dcn32/display_mode_vba_32.c        |  3 ++
 .../dc/dml/dcn32/display_mode_vba_util_32.c   | 33 +++++++++++++++----
 .../dc/dml/dcn32/display_mode_vba_util_32.h   |  1 +
 3 files changed, 31 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
index cbdfb762c10c..6c84b0fa40f4 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_32.c
@@ -813,6 +813,8 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman
 					(v->DRAMSpeedPerState[mode_lib->vba.VoltageLevel] <= MEM_STROBE_FREQ_MHZ ||
 						v->DCFCLKPerState[mode_lib->vba.VoltageLevel] <= DCFCLK_FREQ_EXTRA_PREFETCH_REQ_MHZ) ?
 							mode_lib->vba.ip.min_prefetch_in_strobe_us : 0,
+					mode_lib->vba.PrefetchModePerState[mode_lib->vba.VoltageLevel][mode_lib->vba.maxMpcComb] > 0 || mode_lib->vba.DRAMClockChangeRequirementFinal == false,
+
 					/* Output */
 					&v->DSTXAfterScaler[k],
 					&v->DSTYAfterScaler[k],
@@ -3317,6 +3319,7 @@ void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
 							v->SwathHeightCThisState[k], v->TWait,
 							(v->DRAMSpeedPerState[i] <= MEM_STROBE_FREQ_MHZ || v->DCFCLKState[i][j] <= DCFCLK_FREQ_EXTRA_PREFETCH_REQ_MHZ) ?
 									mode_lib->vba.ip.min_prefetch_in_strobe_us : 0,
+							mode_lib->vba.PrefetchModePerState[i][j] > 0 || mode_lib->vba.DRAMClockChangeRequirementFinal == false,
 
 							/* Output */
 							&v->dummy_vars.dml32_ModeSupportAndSystemConfigurationFull.DSTXAfterScaler[k],
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c
index d940dfa5ae43..80fccd4999a5 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c
@@ -3423,6 +3423,7 @@ bool dml32_CalculatePrefetchSchedule(
 		unsigned int SwathHeightC,
 		double TWait,
 		double TPreReq,
+		bool ExtendPrefetchIfPossible,
 		/* Output */
 		double   *DSTXAfterScaler,
 		double   *DSTYAfterScaler,
@@ -3892,12 +3893,32 @@ bool dml32_CalculatePrefetchSchedule(
 			/* Clamp to oto for bandwidth calculation */
 			LinesForPrefetchBandwidth = dst_y_prefetch_oto;
 		} else {
-			*DestinationLinesForPrefetch = dst_y_prefetch_equ;
-			TimeForFetchingMetaPTE = Tvm_equ;
-			TimeForFetchingRowInVBlank = Tr0_equ;
-			*PrefetchBandwidth = prefetch_bw_equ;
-			/* Clamp to equ for bandwidth calculation */
-			LinesForPrefetchBandwidth = dst_y_prefetch_equ;
+			/* For mode programming we want to extend the prefetch as much as possible
+			 * (up to oto, or as long as we can for equ) if we're not already applying
+			 * the 60us prefetch requirement. This is to avoid intermittent underflow
+			 * issues during prefetch.
+			 *
+			 * The prefetch extension is applied under the following scenarios:
+			 * 1. We're in prefetch mode > 0 (i.e. we don't support MCLK switch in blank)
+			 * 2. We're using subvp or drr methods of p-state switch, in which case we
+			 *    we don't care if prefetch takes up more of the blanking time
+			 *
+			 * Mode programming typically chooses the smallest prefetch time possible
+			 * (i.e. highest bandwidth during prefetch) presumably to create margin between
+			 * p-states / c-states that happen in vblank and prefetch. Therefore we only
+			 * apply this prefetch extension when p-state in vblank is not required (UCLK
+			 * p-states take up the most vblank time).
+			 */
+			if (ExtendPrefetchIfPossible && TPreReq == 0 && VStartup < MaxVStartup) {
+				MyError = true;
+			} else {
+				*DestinationLinesForPrefetch = dst_y_prefetch_equ;
+				TimeForFetchingMetaPTE = Tvm_equ;
+				TimeForFetchingRowInVBlank = Tr0_equ;
+				*PrefetchBandwidth = prefetch_bw_equ;
+				/* Clamp to equ for bandwidth calculation */
+				LinesForPrefetchBandwidth = dst_y_prefetch_equ;
+			}
 		}
 
 		*DestinationLinesToRequestVMInVBlank = dml_ceil(4.0 * TimeForFetchingMetaPTE / LineTime, 1.0) / 4.0;
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.h b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.h
index 592d174df6c6..5d34735df83d 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.h
@@ -747,6 +747,7 @@ bool dml32_CalculatePrefetchSchedule(
 		unsigned int SwathHeightC,
 		double TWait,
 		double TPreReq,
+		bool ExtendPrefetchIfPossible,
 		/* Output */
 		double   *DSTXAfterScaler,
 		double   *DSTYAfterScaler,
-- 
2.39.2