[PATCH] drm/amd/display: fix hw rotated modes when PSR-SU is enabled

Kai-Heng Feng kai.heng.feng at canonical.com
Thu Dec 7 02:07:01 UTC 2023


On Thu, Dec 7, 2023 at 9:57 AM Mario Limonciello
<mario.limonciello at amd.com> wrote:
>
> On 12/6/2023 19:23, Kai-Heng Feng wrote:
> > On Wed, Dec 6, 2023 at 4:29 AM Mario Limonciello
> > <mario.limonciello at amd.com> wrote:
> >>
> >> On 12/5/2023 14:17, Hamza Mahfooz wrote:
> >>> We currently don't support dirty rectangles on hardware rotated modes.
> >>> So, if a user is using hardware rotated modes with PSR-SU enabled,
> >>> use PSR-SU FFU for all rotated planes (including cursor planes).
> >>>
> >>
> >> Here is the email for the original reporter to give an attribution tag.
> >>
> >> Reported-by: Kai-Heng Feng <kai.heng.feng at canonical.com>
> >
> > For this particular issue,
> > Tested-by: Kai-Heng Feng <kai.heng.feng at canonical.com>
>
> Can you confirm what kernel base you tested issue against?
>
> I ask because Bin Li (+CC) also tested it against 6.1 based LTS kernel
> but ran into problems.

The patch was tested against ADSN.

>
> I wonder if it's because of other dependency patches.  If that's the
> case it would be good to call them out in the Cc: @stable as
> dependencies so when Greg or Sasha backport this 6.1 doesn't get broken.

Probably. I haven't really tested any older kernel series.

Kai-Heng

>
> Bin,
>
> Could you run ./scripts/decode_stacktrace.sh on your kernel trace to
> give us a specific line number on the issue you hit?
>
> Thanks!
> >
> >>
> >>> Cc: stable at vger.kernel.org
> >>> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2952
> >>> Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
> >>> Signed-off-by: Hamza Mahfooz <hamza.mahfooz at amd.com>
> >>> ---
> >>>    drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c    |  4 ++++
> >>>    drivers/gpu/drm/amd/display/dc/dc_hw_types.h         |  1 +
> >>>    drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c    | 12 ++++++++++--
> >>>    .../gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c  |  3 ++-
> >>>    4 files changed, 17 insertions(+), 3 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> >>> index c146dc9cba92..79f8102d2601 100644
> >>> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> >>> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> >>> @@ -5208,6 +5208,7 @@ static void fill_dc_dirty_rects(struct drm_plane *plane,
> >>>        bool bb_changed;
> >>>        bool fb_changed;
> >>>        u32 i = 0;
> >>> +
> >>
> >> Looks like a spurious newline here.
> >>
> >>>        *dirty_regions_changed = false;
> >>>
> >>>        /*
> >>> @@ -5217,6 +5218,9 @@ static void fill_dc_dirty_rects(struct drm_plane *plane,
> >>>        if (plane->type == DRM_PLANE_TYPE_CURSOR)
> >>>                return;
> >>>
> >>> +     if (new_plane_state->rotation != DRM_MODE_ROTATE_0)
> >>> +             goto ffu;
> >>> +
> >>
> >> I noticed that the original report was specifically on 180°.  Since
> >> you're also covering 90° and 270° with this check it sounds like it's
> >> actually problematic on those too?
> >
> > 90 & 270 are problematic too. But from what I observed the issue is
> > much more than just cursors.
>
> Got it; thanks.
>
> >
> > Kai-Heng
> >
> >>
> >>>        num_clips = drm_plane_get_damage_clips_count(new_plane_state);
> >>>        clips = drm_plane_get_damage_clips(new_plane_state);
> >>>
> >>> diff --git a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h
> >>> index 9649934ea186..e2a3aa8812df 100644
> >>> --- a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h
> >>> +++ b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h
> >>> @@ -465,6 +465,7 @@ struct dc_cursor_mi_param {
> >>>        struct fixed31_32 v_scale_ratio;
> >>>        enum dc_rotation_angle rotation;
> >>>        bool mirror;
> >>> +     struct dc_stream_state *stream;
> >>>    };
> >>>
> >>>    /* IPP related types */
> >>> diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c
> >>> index 139cf31d2e45..89c3bf0fe0c9 100644
> >>> --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c
> >>> +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c
> >>> @@ -1077,8 +1077,16 @@ void hubp2_cursor_set_position(
> >>>        if (src_y_offset < 0)
> >>>                src_y_offset = 0;
> >>>        /* Save necessary cursor info x, y position. w, h is saved in attribute func. */
> >>> -     hubp->cur_rect.x = src_x_offset + param->viewport.x;
> >>> -     hubp->cur_rect.y = src_y_offset + param->viewport.y;
> >>> +     if (param->stream->link->psr_settings.psr_version >= DC_PSR_VERSION_SU_1 &&
> >>> +         param->rotation != ROTATION_ANGLE_0) {
> >>
> >> Ditto on above about 90° and 270°.
> >>
> >>> +             hubp->cur_rect.x = 0;
> >>> +             hubp->cur_rect.y = 0;
> >>> +             hubp->cur_rect.w = param->stream->timing.h_addressable;
> >>> +             hubp->cur_rect.h = param->stream->timing.v_addressable;
> >>> +     } else {
> >>> +             hubp->cur_rect.x = src_x_offset + param->viewport.x;
> >>> +             hubp->cur_rect.y = src_y_offset + param->viewport.y;
> >>> +     }
> >>>    }
> >>>
> >>>    void hubp2_clk_cntl(struct hubp *hubp, bool enable)
> >>> diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
> >>> index 2b8b8366538e..ce5613a76267 100644
> >>> --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
> >>> +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
> >>> @@ -3417,7 +3417,8 @@ void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx)
> >>>                .h_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.horz,
> >>>                .v_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.vert,
> >>>                .rotation = pipe_ctx->plane_state->rotation,
> >>> -             .mirror = pipe_ctx->plane_state->horizontal_mirror
> >>> +             .mirror = pipe_ctx->plane_state->horizontal_mirror,
> >>> +             .stream = pipe_ctx->stream
> >>
> >> As a nit; I think it's worth leaving a harmless trailing ',' so that
> >> there is less ping pong in the future when adding new members to a struct.
> >>
> >>>        };
> >>>        bool pipe_split_on = false;
> >>>        bool odm_combine_on = (pipe_ctx->next_odm_pipe != NULL) ||
> >>
> >>
>


More information about the amd-gfx mailing list