[PATCH 11/25] drm/amd/display: Set test_pattern_changed update flag on pipe enable

[Wayne Lin]

From: George Shen <george.shen at amd.com>

[Why]
In certain cases, ODM pipe split can occur while stream already has test
pattern enabled. The new pipe used in the ODM combine config must be
configured to output the test pattern in this case.

[How]
If the stream is configured to output test pattern, then set the
test_pattern_changed update flag for the new pipe when it gets enabled.

Reviewed-by: Alvin Lee <alvin.lee2 at amd.com>
Acked-by: Wayne Lin <wayne.lin at amd.com>
Signed-off-by: George Shen <george.shen at amd.com>
---
 drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
index 5bb5e2960276..2c8eff815ec1 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
@@ -1400,6 +1400,10 @@ static void dcn20_detect_pipe_changes(struct pipe_ctx *old_pipe, struct pipe_ctx
 		new_pipe->update_flags.bits.scaler = 1;
 		new_pipe->update_flags.bits.viewport = 1;
 		new_pipe->update_flags.bits.det_size = 1;
+		if (new_pipe->stream->test_pattern.type != DP_TEST_PATTERN_VIDEO_MODE &&
+				new_pipe->stream_res.test_pattern_params.width != 0 &&
+				new_pipe->stream_res.test_pattern_params.height != 0)
+			new_pipe->update_flags.bits.test_pattern_changed = 1;
 		if (!new_pipe->top_pipe && !new_pipe->prev_odm_pipe) {
 			new_pipe->update_flags.bits.odm = 1;
 			new_pipe->update_flags.bits.global_sync = 1;
-- 
2.37.3