[PATCH 4/8] drm/amdgpu: Add V11 graphics MQD functions

Alex Deucher alexdeucher at gmail.com
Tue Feb 7 16:05:22 UTC 2023


On Tue, Feb 7, 2023 at 10:43 AM Shashank Sharma <shashank.sharma at amd.com> wrote:
>
>
> On 07/02/2023 16:17, Alex Deucher wrote:
> > On Fri, Feb 3, 2023 at 4:55 PM Shashank Sharma <shashank.sharma at amd.com> wrote:
> >> From: Shashank Sharma <contactshashanksharma at gmail.com>
> >>
> >> MQD describes the properies of a user queue to the HW, and allows it to
> >> accurately configure the queue while mapping it in GPU HW. This patch
> >> adds:
> >> - A new header file which contains the userqueue MQD definition for
> >>    V11 graphics engine.
> >> - A new function which fills it with userqueue data and prepares MQD
> >> - A function which sets-up the MQD function ptrs in the generic userqueue
> >>    creation code.
> >>
> >> V1: Addressed review comments from RFC patch series
> >>      - Reuse the existing MQD structure instead of creating a new one
> >>      - MQD format and creation can be IP specific, keep it like that
> >>
> >> Cc: Alex Deucher <alexander.deucher at amd.com>
> >> Cc: Christian Koenig <christian.koenig at amd.com>
> >> Signed-off-by: Arvind Yadav <arvind.yadav at amd.com>
> >> Signed-off-by: Shashank Sharma <shashank.sharma at amd.com>
> >> ---
> >>   drivers/gpu/drm/amd/amdgpu/Makefile           |   1 +
> >>   drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue.c |  28 ++++
> >>   .../amd/amdgpu/amdgpu_userqueue_mqd_gfx_v11.c | 132 ++++++++++++++++++
> >>   drivers/gpu/drm/amd/include/v11_structs.h     |  16 +--
> >>   4 files changed, 169 insertions(+), 8 deletions(-)
> >>   create mode 100644 drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue_mqd_gfx_v11.c
> >>
> >> diff --git a/drivers/gpu/drm/amd/amdgpu/Makefile b/drivers/gpu/drm/amd/amdgpu/Makefile
> >> index 764801cc8203..6ae9d5792791 100644
> >> --- a/drivers/gpu/drm/amd/amdgpu/Makefile
> >> +++ b/drivers/gpu/drm/amd/amdgpu/Makefile
> >> @@ -212,6 +212,7 @@ amdgpu-y += amdgpu_amdkfd.o
> >>
> >>   # add usermode queue
> >>   amdgpu-y += amdgpu_userqueue.o
> >> +amdgpu-y += amdgpu_userqueue_mqd_gfx_v11.o
> >>
> >>   ifneq ($(CONFIG_HSA_AMD),)
> >>   AMDKFD_PATH := ../amdkfd
> >> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue.c
> >> index 625c2fe1e84a..9f3490a91776 100644
> >> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue.c
> >> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue.c
> >> @@ -202,13 +202,41 @@ int amdgpu_userq_ioctl(struct drm_device *dev, void *data,
> >>       return r;
> >>   }
> >>
> >> +extern const struct amdgpu_userq_mqd_funcs userq_gfx_v11_mqd_funcs;
> >> +
> >> +static int
> >> +amdgpu_userqueue_setup_mqd_funcs(struct amdgpu_userq_mgr *uq_mgr)
> >> +{
> >> +    int maj;
> >> +    struct amdgpu_device *adev = uq_mgr->adev;
> >> +    uint32_t version = adev->ip_versions[GC_HWIP][0];
> >> +
> >> +    maj = IP_VERSION_MAJ(version);
> >> +    if (maj == 11) {
> >> +        uq_mgr->userq_mqd_funcs = &userq_gfx_v11_mqd_funcs;
> >> +    } else {
> >> +        DRM_WARN("This IP doesn't support usermode queues\n");
> >> +        return -EINVAL;
> >> +    }
> >> +
> > I think it would be cleaner to just store these callbacks in adev.
> > Maybe something like adev->user_queue_funcs[AMDGPU_HW_IP_NUM].  Then
> > in early_init for each IP, we can register the callbacks.  When the
> > user goes to create a new user_queue, we can check check to see if the
> > function pointer is NULL or not for the queue type:
> >
> > if (!adev->user_queue_funcs[ip_type])
> >    return -EINVAL
> >
> > r = adev->user_queue_funcs[ip_type]->create_queue();
>
> Sounds like a good idea, we can do this.
>
> >
> > Actually, there is already an mqd manager interface (adev->mqds[]).
> > Maybe you can leverage that interface.
>
> Yep, I saw that and initially even tried to work on that interface
> itself, and then realized that it doesn't allow us to pass some
>
> additional parameters (like queue->vm, various BOs like proc_ctx_bo,
> gang_ctx_bo's and so on). All of these are required in the MQD
>
> and we will need them to be added into MQD. I even thought of expanding
> this structure with additional parameters, but I felt like
>
> it defeats the purpose of this MQD properties. But if you feel strongly
> about that, we can work around it.

I think it would be cleaner to just add whatever additional mqd
properties you need to amdgpu_mqd_prop, and then you can share
gfx_v11_0_gfx_mqd_init() and gfx_v11_0_compute_mqd_init()  for GFX and
sdma_v6_0_mqd_init() for SDMA.  That way if we make changes to the MQD
configuration, we only have to change one function.

Alex

>
> >> +    return 0;
> >> +}
> >> +
> >>   int amdgpu_userq_mgr_init(struct amdgpu_userq_mgr *userq_mgr, struct amdgpu_device *adev)
> >>   {
> >> +    int r;
> >> +
> >>       mutex_init(&userq_mgr->userq_mutex);
> >>       idr_init_base(&userq_mgr->userq_idr, 1);
> >>       INIT_LIST_HEAD(&userq_mgr->userq_list);
> >>       userq_mgr->adev = adev;
> >>
> >> +    r = amdgpu_userqueue_setup_mqd_funcs(userq_mgr);
> >> +    if (r) {
> >> +        DRM_ERROR("Failed to setup MQD functions for usermode queue\n");
> >> +        return r;
> >> +    }
> >> +
> >>       return 0;
> >>   }
> >>
> >> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue_mqd_gfx_v11.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue_mqd_gfx_v11.c
> >> new file mode 100644
> >> index 000000000000..57889729d635
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue_mqd_gfx_v11.c
> >> @@ -0,0 +1,132 @@
> >> +/*
> >> + * Copyright 2022 Advanced Micro Devices, Inc.
> >> + *
> >> + * Permission is hereby granted, free of charge, to any person obtaining a
> >> + * copy of this software and associated documentation files (the "Software"),
> >> + * to deal in the Software without restriction, including without limitation
> >> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> >> + * and/or sell copies of the Software, and to permit persons to whom the
> >> + * Software is furnished to do so, subject to the following conditions:
> >> + *
> >> + * The above copyright notice and this permission notice shall be included in
> >> + * all copies or substantial portions of the Software.
> >> + *
> >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> >> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> >> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> >> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> >> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> >> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> >> + * OTHER DEALINGS IN THE SOFTWARE.
> >> + *
> >> + */
> >> +#include "amdgpu.h"
> >> +#include "amdgpu_userqueue.h"
> >> +#include "v11_structs.h"
> >> +#include "amdgpu_mes.h"
> >> +#include "gc/gc_11_0_0_offset.h"
> >> +#include "gc/gc_11_0_0_sh_mask.h"
> >> +
> >> +static int
> >> +amdgpu_userq_gfx_v11_mqd_create(struct amdgpu_userq_mgr *uq_mgr, struct amdgpu_usermode_queue *queue)
> >> +{
> >> +    uint32_t tmp, rb_bufsz;
> >> +    uint64_t hqd_gpu_addr, wb_gpu_addr;
> >> +    struct v11_gfx_mqd *mqd = queue->mqd_cpu_ptr;
> >> +    struct amdgpu_device *adev = uq_mgr->adev;
> >> +
> >> +    /* set up gfx hqd wptr */
> >> +    mqd->cp_gfx_hqd_wptr = 0;
> >> +    mqd->cp_gfx_hqd_wptr_hi = 0;
> >> +
> >> +    /* set the pointer to the MQD */
> >> +    mqd->cp_mqd_base_addr = queue->mqd_gpu_addr & 0xfffffffc;
> >> +    mqd->cp_mqd_base_addr_hi = upper_32_bits(queue->mqd_gpu_addr);
> >> +
> >> +    /* set up mqd control */
> >> +    tmp = RREG32_SOC15(GC, 0, regCP_GFX_MQD_CONTROL);
> >> +    tmp = REG_SET_FIELD(tmp, CP_GFX_MQD_CONTROL, VMID, 0);
> >> +    tmp = REG_SET_FIELD(tmp, CP_GFX_MQD_CONTROL, PRIV_STATE, 1);
> >> +    tmp = REG_SET_FIELD(tmp, CP_GFX_MQD_CONTROL, CACHE_POLICY, 0);
> >> +    mqd->cp_gfx_mqd_control = tmp;
> >> +
> >> +    /* set up gfx_hqd_vimd with 0x0 to indicate the ring buffer's vmid */
> >> +    tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_VMID);
> >> +    tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_VMID, VMID, 0);
> >> +    mqd->cp_gfx_hqd_vmid = 0;
> >> +
> >> +    /* set up default queue priority level
> >> +    * 0x0 = low priority, 0x1 = high priority */
> >> +    tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_QUEUE_PRIORITY);
> >> +    tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_QUEUE_PRIORITY, PRIORITY_LEVEL, 0);
> >> +    mqd->cp_gfx_hqd_queue_priority = tmp;
> >> +
> >> +    /* set up time quantum */
> >> +    tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_QUANTUM);
> >> +    tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_QUANTUM, QUANTUM_EN, 1);
> >> +    mqd->cp_gfx_hqd_quantum = tmp;
> >> +
> >> +    /* set up gfx hqd base. this is similar as CP_RB_BASE */
> >> +    hqd_gpu_addr = queue->queue_gpu_addr >> 8;
> >> +    mqd->cp_gfx_hqd_base = hqd_gpu_addr;
> >> +    mqd->cp_gfx_hqd_base_hi = upper_32_bits(hqd_gpu_addr);
> >> +
> >> +    /* set up hqd_rptr_addr/_hi, similar as CP_RB_RPTR */
> >> +    wb_gpu_addr = queue->rptr_gpu_addr;
> >> +    mqd->cp_gfx_hqd_rptr_addr = wb_gpu_addr & 0xfffffffc;
> >> +    mqd->cp_gfx_hqd_rptr_addr_hi =
> >> +    upper_32_bits(wb_gpu_addr) & 0xffff;
> >> +
> >> +    /* set up rb_wptr_poll addr */
> >> +    wb_gpu_addr = queue->wptr_gpu_addr;
> >> +    mqd->cp_rb_wptr_poll_addr_lo = wb_gpu_addr & 0xfffffffc;
> >> +    mqd->cp_rb_wptr_poll_addr_hi = upper_32_bits(wb_gpu_addr) & 0xffff;
> >> +
> >> +    /* set up the gfx_hqd_control, similar as CP_RB0_CNTL */
> >> +    rb_bufsz = order_base_2(queue->queue_size / 4) - 1;
> >> +    tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_CNTL);
> >> +    tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_CNTL, RB_BUFSZ, rb_bufsz);
> >> +    tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_CNTL, RB_BLKSZ, rb_bufsz - 2);
> >> +#ifdef __BIG_ENDIAN
> >> +    tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_CNTL, BUF_SWAP, 1);
> >> +#endif
> >> +    mqd->cp_gfx_hqd_cntl = tmp;
> >> +
> >> +    /* set up cp_doorbell_control */
> >> +    tmp = RREG32_SOC15(GC, 0, regCP_RB_DOORBELL_CONTROL);
> >> +    if (queue->use_doorbell) {
> >> +        tmp = REG_SET_FIELD(tmp, CP_RB_DOORBELL_CONTROL,
> >> +                    DOORBELL_OFFSET, queue->doorbell_index);
> >> +        tmp = REG_SET_FIELD(tmp, CP_RB_DOORBELL_CONTROL,
> >> +                    DOORBELL_EN, 1);
> >> +    } else {
> >> +        tmp = REG_SET_FIELD(tmp, CP_RB_DOORBELL_CONTROL,
> >> +                    DOORBELL_EN, 0);
> >> +    }
> >> +    mqd->cp_rb_doorbell_control = tmp;
> >> +
> >> +    /* reset read and write pointers, similar to CP_RB0_WPTR/_RPTR */
> >> +    mqd->cp_gfx_hqd_rptr = RREG32_SOC15(GC, 0, regCP_GFX_HQD_RPTR);
> >> +
> >> +    /* activate the queue */
> >> +    mqd->cp_gfx_hqd_active = 1;
> >> +
> > Can you use gfx_v11_0_gfx_mqd_init() and gfx_v11_0_compute_mqd_init()
> > directly or leverage adev->mqds[]?
>
> Let us try this out and come back.
>
> - Shashank
>
>
> >
> > Alex
> >
> >> +    return 0;
> >> +}
> >> +
> >> +static void
> >> +amdgpu_userq_gfx_v11_mqd_destroy(struct amdgpu_userq_mgr *uq_mgr, struct amdgpu_usermode_queue *queue)
> >> +{
> >> +
> >> +}
> >> +
> >> +static int amdgpu_userq_gfx_v11_mqd_size(struct amdgpu_userq_mgr *uq_mgr)
> >> +{
> >> +    return sizeof(struct v11_gfx_mqd);
> >> +}
> >> +
> >> +const struct amdgpu_userq_mqd_funcs userq_gfx_v11_mqd_funcs = {
> >> +    .mqd_size = amdgpu_userq_gfx_v11_mqd_size,
> >> +    .mqd_create = amdgpu_userq_gfx_v11_mqd_create,
> >> +    .mqd_destroy = amdgpu_userq_gfx_v11_mqd_destroy,
> >> +};
> >> diff --git a/drivers/gpu/drm/amd/include/v11_structs.h b/drivers/gpu/drm/amd/include/v11_structs.h
> >> index b8ff7456ae0b..f8008270f813 100644
> >> --- a/drivers/gpu/drm/amd/include/v11_structs.h
> >> +++ b/drivers/gpu/drm/amd/include/v11_structs.h
> >> @@ -25,14 +25,14 @@
> >>   #define V11_STRUCTS_H_
> >>
> >>   struct v11_gfx_mqd {
> >> -       uint32_t reserved_0; // offset: 0  (0x0)
> >> -       uint32_t reserved_1; // offset: 1  (0x1)
> >> -       uint32_t reserved_2; // offset: 2  (0x2)
> >> -       uint32_t reserved_3; // offset: 3  (0x3)
> >> -       uint32_t reserved_4; // offset: 4  (0x4)
> >> -       uint32_t reserved_5; // offset: 5  (0x5)
> >> -       uint32_t reserved_6; // offset: 6  (0x6)
> >> -       uint32_t reserved_7; // offset: 7  (0x7)
> >> +       uint32_t shadow_base_lo; // offset: 0  (0x0)
> >> +       uint32_t shadow_base_hi; // offset: 1  (0x1)
> >> +       uint32_t gds_bkup_base_lo; // offset: 2  (0x2)
> >> +       uint32_t gds_bkup_base_hi; // offset: 3  (0x3)
> >> +       uint32_t fw_work_area_base_lo; // offset: 4  (0x4)
> >> +       uint32_t fw_work_area_base_hi; // offset: 5  (0x5)
> >> +       uint32_t shadow_initialized; // offset: 6  (0x6)
> >> +       uint32_t ib_vmid; // offset: 7  (0x7)
> >>          uint32_t reserved_8; // offset: 8  (0x8)
> >>          uint32_t reserved_9; // offset: 9  (0x9)
> >>          uint32_t reserved_10; // offset: 10  (0xA)
> >> --
> >> 2.34.1
> >>


More information about the amd-gfx mailing list