[PATCH 4/8] drm/amdgpu: Add V11 graphics MQD functions
Alex Deucher
alexdeucher at gmail.com
Tue Feb 7 17:57:27 UTC 2023
On Tue, Feb 7, 2023 at 12:14 PM Shashank Sharma <shashank.sharma at amd.com> wrote:
>
>
> On 07/02/2023 17:54, Alex Deucher wrote:
> > On Tue, Feb 7, 2023 at 11:37 AM Shashank Sharma <shashank.sharma at amd.com> wrote:
> >>
> >> On 07/02/2023 17:05, Alex Deucher wrote:
> >>> On Tue, Feb 7, 2023 at 10:43 AM Shashank Sharma <shashank.sharma at amd.com> wrote:
> >>>> On 07/02/2023 16:17, Alex Deucher wrote:
> >>>>> On Fri, Feb 3, 2023 at 4:55 PM Shashank Sharma <shashank.sharma at amd.com> wrote:
> >>>>>> From: Shashank Sharma <contactshashanksharma at gmail.com>
> >>>>>>
> >>>>>> MQD describes the properies of a user queue to the HW, and allows it to
> >>>>>> accurately configure the queue while mapping it in GPU HW. This patch
> >>>>>> adds:
> >>>>>> - A new header file which contains the userqueue MQD definition for
> >>>>>> V11 graphics engine.
> >>>>>> - A new function which fills it with userqueue data and prepares MQD
> >>>>>> - A function which sets-up the MQD function ptrs in the generic userqueue
> >>>>>> creation code.
> >>>>>>
> >>>>>> V1: Addressed review comments from RFC patch series
> >>>>>> - Reuse the existing MQD structure instead of creating a new one
> >>>>>> - MQD format and creation can be IP specific, keep it like that
> >>>>>>
> >>>>>> Cc: Alex Deucher <alexander.deucher at amd.com>
> >>>>>> Cc: Christian Koenig <christian.koenig at amd.com>
> >>>>>> Signed-off-by: Arvind Yadav <arvind.yadav at amd.com>
> >>>>>> Signed-off-by: Shashank Sharma <shashank.sharma at amd.com>
> >>>>>> ---
> >>>>>> drivers/gpu/drm/amd/amdgpu/Makefile | 1 +
> >>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue.c | 28 ++++
> >>>>>> .../amd/amdgpu/amdgpu_userqueue_mqd_gfx_v11.c | 132 ++++++++++++++++++
> >>>>>> drivers/gpu/drm/amd/include/v11_structs.h | 16 +--
> >>>>>> 4 files changed, 169 insertions(+), 8 deletions(-)
> >>>>>> create mode 100644 drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue_mqd_gfx_v11.c
> >>>>>>
> >>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/Makefile b/drivers/gpu/drm/amd/amdgpu/Makefile
> >>>>>> index 764801cc8203..6ae9d5792791 100644
> >>>>>> --- a/drivers/gpu/drm/amd/amdgpu/Makefile
> >>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/Makefile
> >>>>>> @@ -212,6 +212,7 @@ amdgpu-y += amdgpu_amdkfd.o
> >>>>>>
> >>>>>> # add usermode queue
> >>>>>> amdgpu-y += amdgpu_userqueue.o
> >>>>>> +amdgpu-y += amdgpu_userqueue_mqd_gfx_v11.o
> >>>>>>
> >>>>>> ifneq ($(CONFIG_HSA_AMD),)
> >>>>>> AMDKFD_PATH := ../amdkfd
> >>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue.c
> >>>>>> index 625c2fe1e84a..9f3490a91776 100644
> >>>>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue.c
> >>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue.c
> >>>>>> @@ -202,13 +202,41 @@ int amdgpu_userq_ioctl(struct drm_device *dev, void *data,
> >>>>>> return r;
> >>>>>> }
> >>>>>>
> >>>>>> +extern const struct amdgpu_userq_mqd_funcs userq_gfx_v11_mqd_funcs;
> >>>>>> +
> >>>>>> +static int
> >>>>>> +amdgpu_userqueue_setup_mqd_funcs(struct amdgpu_userq_mgr *uq_mgr)
> >>>>>> +{
> >>>>>> + int maj;
> >>>>>> + struct amdgpu_device *adev = uq_mgr->adev;
> >>>>>> + uint32_t version = adev->ip_versions[GC_HWIP][0];
> >>>>>> +
> >>>>>> + maj = IP_VERSION_MAJ(version);
> >>>>>> + if (maj == 11) {
> >>>>>> + uq_mgr->userq_mqd_funcs = &userq_gfx_v11_mqd_funcs;
> >>>>>> + } else {
> >>>>>> + DRM_WARN("This IP doesn't support usermode queues\n");
> >>>>>> + return -EINVAL;
> >>>>>> + }
> >>>>>> +
> >>>>> I think it would be cleaner to just store these callbacks in adev.
> >>>>> Maybe something like adev->user_queue_funcs[AMDGPU_HW_IP_NUM]. Then
> >>>>> in early_init for each IP, we can register the callbacks. When the
> >>>>> user goes to create a new user_queue, we can check check to see if the
> >>>>> function pointer is NULL or not for the queue type:
> >>>>>
> >>>>> if (!adev->user_queue_funcs[ip_type])
> >>>>> return -EINVAL
> >>>>>
> >>>>> r = adev->user_queue_funcs[ip_type]->create_queue();
> >>>> Sounds like a good idea, we can do this.
> >>>>
> >>>>> Actually, there is already an mqd manager interface (adev->mqds[]).
> >>>>> Maybe you can leverage that interface.
> >>>> Yep, I saw that and initially even tried to work on that interface
> >>>> itself, and then realized that it doesn't allow us to pass some
> >>>>
> >>>> additional parameters (like queue->vm, various BOs like proc_ctx_bo,
> >>>> gang_ctx_bo's and so on). All of these are required in the MQD
> >>>>
> >>>> and we will need them to be added into MQD. I even thought of expanding
> >>>> this structure with additional parameters, but I felt like
> >>>>
> >>>> it defeats the purpose of this MQD properties. But if you feel strongly
> >>>> about that, we can work around it.
> >>> I think it would be cleaner to just add whatever additional mqd
> >>> properties you need to amdgpu_mqd_prop, and then you can share
> >>> gfx_v11_0_gfx_mqd_init() and gfx_v11_0_compute_mqd_init() for GFX and
> >>> sdma_v6_0_mqd_init() for SDMA. That way if we make changes to the MQD
> >>> configuration, we only have to change one function.
> >>>
> >>> Alex
> >> Noted,
> >>
> >> We might have to add some additional fptrs for .prepare_map() and
> >> .prepare_unmap(). in the mqd funcs.
> >>
> >> These are the required to prepare data for MES HW queue mapping.
> > OK. I think we could start with just using the existing init_mqd
> > callbacks from your create/destroy queue functions for now.
> Ok,
> > That
> > said, do we need the prepare_(un)map callbacks? I think just
> > create/destory callbacks should be fine. In the create callback, we
> > can init the mqd and map it, then in destroy, we can unmap and free.
>
> If you observe the kernel MES framework, it expects the data to be fed
> in a particular format, in form of queue_properties, and
>
> creates the map_queue_packet using those. So we need to re-arrange the
> data we have in MQD or drm_mqd_in in format
>
> of properties, which is being done in prepare_map/unmap. Now, as the MQD
> is IP specific, we will need this
>
> function to be IP specific as well, so I added a new fptr callback.
>
>
> So the idea here is, IP specific stuff like:
>
> - preparing the MQD
>
> - preparing the properties for map_queue_packet
>
> - preparing the context BOs
>
> is being done in IP specific functions in amdgpu_vxx_userqueue.c
>
>
> and
>
> - initializing the queue
>
> - handling the IOCTL
>
> - adding/mapping the queue to MES
This seems weird to me. Why have this in the asic independent code?
I was thinking the IOCTL would mostly just be a wrapper around IP
specific callbacks for create and destroy. The callback would take a
generic mqd struct as a parameter, that was basically just a
passthrough from the IOCTL mqd struct.
struct amdgpu_user_queue_mqd {
u32 flags;
struct amdgpu_bo doorbell_bo;
u32 doorbell_offset;
struct amdgpu_bo queue_bo;
struct amdgpu_bo rptr_bo;
struct amdgpu_bo wptr_bo;
u64 queue_gpu_va;
u64 rptr_gpu_va;
u64 wptr_gpu_va;
int gang;
...
};
Then something like:
static int gfx_v11_0_create_gfx_user_queue(struct amdgpu_device *adev,
struct amdgpu_user_queue_mqd *user_mqd)
{
struct gfx_v11_mqd mqd;
mqd = kmalloc(size_of(struct gfx_v11_mqd mqd));
...
// allocate any meta data, ctx buffers, etc.
mqd->ctx_bo = amdgpu_bo_create();
...
// populate the IP specific mqd with the generic stuff
mqd->mqd_gpu_addr = user_mqd->queue_gpu_va;
...
// init mqd
r = adev->mqds[AMDGPU_HW_IP_GFX].init_mqd();
// add gang, or increase ref count
r = amdgpu_mes_add_gang();
// map mqd
r = amdgpu_mes_add_ring();
}
static int gfx_v11_0_destroy_gfx_user_queue(struct amdgpu_device
*adev, struct amdgpu_user_queue_mqd *user_mqd)
{
// unmap mqd
amdgpu_mes_remove_ring();
// drop reference to the gang
amdgpu_mes_remove_gang();
// free any meta data, ctx buffers, etc.
amdgpu_bo_unref(mqd->ctx_bo);
kfree(mqd);
}
>
> - any bookkeeping
>
> is being done from the IP independent amdgpu_userqueue.c functions.
>
> - Shashank
> > Alex
> >
> >
> > Alex
> >
> >> - Shashank
> >>
> >>>>>> + return 0;
> >>>>>> +}
> >>>>>> +
> >>>>>> int amdgpu_userq_mgr_init(struct amdgpu_userq_mgr *userq_mgr, struct amdgpu_device *adev)
> >>>>>> {
> >>>>>> + int r;
> >>>>>> +
> >>>>>> mutex_init(&userq_mgr->userq_mutex);
> >>>>>> idr_init_base(&userq_mgr->userq_idr, 1);
> >>>>>> INIT_LIST_HEAD(&userq_mgr->userq_list);
> >>>>>> userq_mgr->adev = adev;
> >>>>>>
> >>>>>> + r = amdgpu_userqueue_setup_mqd_funcs(userq_mgr);
> >>>>>> + if (r) {
> >>>>>> + DRM_ERROR("Failed to setup MQD functions for usermode queue\n");
> >>>>>> + return r;
> >>>>>> + }
> >>>>>> +
> >>>>>> return 0;
> >>>>>> }
> >>>>>>
> >>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue_mqd_gfx_v11.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue_mqd_gfx_v11.c
> >>>>>> new file mode 100644
> >>>>>> index 000000000000..57889729d635
> >>>>>> --- /dev/null
> >>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userqueue_mqd_gfx_v11.c
> >>>>>> @@ -0,0 +1,132 @@
> >>>>>> +/*
> >>>>>> + * Copyright 2022 Advanced Micro Devices, Inc.
> >>>>>> + *
> >>>>>> + * Permission is hereby granted, free of charge, to any person obtaining a
> >>>>>> + * copy of this software and associated documentation files (the "Software"),
> >>>>>> + * to deal in the Software without restriction, including without limitation
> >>>>>> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> >>>>>> + * and/or sell copies of the Software, and to permit persons to whom the
> >>>>>> + * Software is furnished to do so, subject to the following conditions:
> >>>>>> + *
> >>>>>> + * The above copyright notice and this permission notice shall be included in
> >>>>>> + * all copies or substantial portions of the Software.
> >>>>>> + *
> >>>>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> >>>>>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> >>>>>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> >>>>>> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> >>>>>> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> >>>>>> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> >>>>>> + * OTHER DEALINGS IN THE SOFTWARE.
> >>>>>> + *
> >>>>>> + */
> >>>>>> +#include "amdgpu.h"
> >>>>>> +#include "amdgpu_userqueue.h"
> >>>>>> +#include "v11_structs.h"
> >>>>>> +#include "amdgpu_mes.h"
> >>>>>> +#include "gc/gc_11_0_0_offset.h"
> >>>>>> +#include "gc/gc_11_0_0_sh_mask.h"
> >>>>>> +
> >>>>>> +static int
> >>>>>> +amdgpu_userq_gfx_v11_mqd_create(struct amdgpu_userq_mgr *uq_mgr, struct amdgpu_usermode_queue *queue)
> >>>>>> +{
> >>>>>> + uint32_t tmp, rb_bufsz;
> >>>>>> + uint64_t hqd_gpu_addr, wb_gpu_addr;
> >>>>>> + struct v11_gfx_mqd *mqd = queue->mqd_cpu_ptr;
> >>>>>> + struct amdgpu_device *adev = uq_mgr->adev;
> >>>>>> +
> >>>>>> + /* set up gfx hqd wptr */
> >>>>>> + mqd->cp_gfx_hqd_wptr = 0;
> >>>>>> + mqd->cp_gfx_hqd_wptr_hi = 0;
> >>>>>> +
> >>>>>> + /* set the pointer to the MQD */
> >>>>>> + mqd->cp_mqd_base_addr = queue->mqd_gpu_addr & 0xfffffffc;
> >>>>>> + mqd->cp_mqd_base_addr_hi = upper_32_bits(queue->mqd_gpu_addr);
> >>>>>> +
> >>>>>> + /* set up mqd control */
> >>>>>> + tmp = RREG32_SOC15(GC, 0, regCP_GFX_MQD_CONTROL);
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_GFX_MQD_CONTROL, VMID, 0);
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_GFX_MQD_CONTROL, PRIV_STATE, 1);
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_GFX_MQD_CONTROL, CACHE_POLICY, 0);
> >>>>>> + mqd->cp_gfx_mqd_control = tmp;
> >>>>>> +
> >>>>>> + /* set up gfx_hqd_vimd with 0x0 to indicate the ring buffer's vmid */
> >>>>>> + tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_VMID);
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_VMID, VMID, 0);
> >>>>>> + mqd->cp_gfx_hqd_vmid = 0;
> >>>>>> +
> >>>>>> + /* set up default queue priority level
> >>>>>> + * 0x0 = low priority, 0x1 = high priority */
> >>>>>> + tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_QUEUE_PRIORITY);
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_QUEUE_PRIORITY, PRIORITY_LEVEL, 0);
> >>>>>> + mqd->cp_gfx_hqd_queue_priority = tmp;
> >>>>>> +
> >>>>>> + /* set up time quantum */
> >>>>>> + tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_QUANTUM);
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_QUANTUM, QUANTUM_EN, 1);
> >>>>>> + mqd->cp_gfx_hqd_quantum = tmp;
> >>>>>> +
> >>>>>> + /* set up gfx hqd base. this is similar as CP_RB_BASE */
> >>>>>> + hqd_gpu_addr = queue->queue_gpu_addr >> 8;
> >>>>>> + mqd->cp_gfx_hqd_base = hqd_gpu_addr;
> >>>>>> + mqd->cp_gfx_hqd_base_hi = upper_32_bits(hqd_gpu_addr);
> >>>>>> +
> >>>>>> + /* set up hqd_rptr_addr/_hi, similar as CP_RB_RPTR */
> >>>>>> + wb_gpu_addr = queue->rptr_gpu_addr;
> >>>>>> + mqd->cp_gfx_hqd_rptr_addr = wb_gpu_addr & 0xfffffffc;
> >>>>>> + mqd->cp_gfx_hqd_rptr_addr_hi =
> >>>>>> + upper_32_bits(wb_gpu_addr) & 0xffff;
> >>>>>> +
> >>>>>> + /* set up rb_wptr_poll addr */
> >>>>>> + wb_gpu_addr = queue->wptr_gpu_addr;
> >>>>>> + mqd->cp_rb_wptr_poll_addr_lo = wb_gpu_addr & 0xfffffffc;
> >>>>>> + mqd->cp_rb_wptr_poll_addr_hi = upper_32_bits(wb_gpu_addr) & 0xffff;
> >>>>>> +
> >>>>>> + /* set up the gfx_hqd_control, similar as CP_RB0_CNTL */
> >>>>>> + rb_bufsz = order_base_2(queue->queue_size / 4) - 1;
> >>>>>> + tmp = RREG32_SOC15(GC, 0, regCP_GFX_HQD_CNTL);
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_CNTL, RB_BUFSZ, rb_bufsz);
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_CNTL, RB_BLKSZ, rb_bufsz - 2);
> >>>>>> +#ifdef __BIG_ENDIAN
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_GFX_HQD_CNTL, BUF_SWAP, 1);
> >>>>>> +#endif
> >>>>>> + mqd->cp_gfx_hqd_cntl = tmp;
> >>>>>> +
> >>>>>> + /* set up cp_doorbell_control */
> >>>>>> + tmp = RREG32_SOC15(GC, 0, regCP_RB_DOORBELL_CONTROL);
> >>>>>> + if (queue->use_doorbell) {
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_RB_DOORBELL_CONTROL,
> >>>>>> + DOORBELL_OFFSET, queue->doorbell_index);
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_RB_DOORBELL_CONTROL,
> >>>>>> + DOORBELL_EN, 1);
> >>>>>> + } else {
> >>>>>> + tmp = REG_SET_FIELD(tmp, CP_RB_DOORBELL_CONTROL,
> >>>>>> + DOORBELL_EN, 0);
> >>>>>> + }
> >>>>>> + mqd->cp_rb_doorbell_control = tmp;
> >>>>>> +
> >>>>>> + /* reset read and write pointers, similar to CP_RB0_WPTR/_RPTR */
> >>>>>> + mqd->cp_gfx_hqd_rptr = RREG32_SOC15(GC, 0, regCP_GFX_HQD_RPTR);
> >>>>>> +
> >>>>>> + /* activate the queue */
> >>>>>> + mqd->cp_gfx_hqd_active = 1;
> >>>>>> +
> >>>>> Can you use gfx_v11_0_gfx_mqd_init() and gfx_v11_0_compute_mqd_init()
> >>>>> directly or leverage adev->mqds[]?
> >>>> Let us try this out and come back.
> >>>>
> >>>> - Shashank
> >>>>
> >>>>
> >>>>> Alex
> >>>>>
> >>>>>> + return 0;
> >>>>>> +}
> >>>>>> +
> >>>>>> +static void
> >>>>>> +amdgpu_userq_gfx_v11_mqd_destroy(struct amdgpu_userq_mgr *uq_mgr, struct amdgpu_usermode_queue *queue)
> >>>>>> +{
> >>>>>> +
> >>>>>> +}
> >>>>>> +
> >>>>>> +static int amdgpu_userq_gfx_v11_mqd_size(struct amdgpu_userq_mgr *uq_mgr)
> >>>>>> +{
> >>>>>> + return sizeof(struct v11_gfx_mqd);
> >>>>>> +}
> >>>>>> +
> >>>>>> +const struct amdgpu_userq_mqd_funcs userq_gfx_v11_mqd_funcs = {
> >>>>>> + .mqd_size = amdgpu_userq_gfx_v11_mqd_size,
> >>>>>> + .mqd_create = amdgpu_userq_gfx_v11_mqd_create,
> >>>>>> + .mqd_destroy = amdgpu_userq_gfx_v11_mqd_destroy,
> >>>>>> +};
> >>>>>> diff --git a/drivers/gpu/drm/amd/include/v11_structs.h b/drivers/gpu/drm/amd/include/v11_structs.h
> >>>>>> index b8ff7456ae0b..f8008270f813 100644
> >>>>>> --- a/drivers/gpu/drm/amd/include/v11_structs.h
> >>>>>> +++ b/drivers/gpu/drm/amd/include/v11_structs.h
> >>>>>> @@ -25,14 +25,14 @@
> >>>>>> #define V11_STRUCTS_H_
> >>>>>>
> >>>>>> struct v11_gfx_mqd {
> >>>>>> - uint32_t reserved_0; // offset: 0 (0x0)
> >>>>>> - uint32_t reserved_1; // offset: 1 (0x1)
> >>>>>> - uint32_t reserved_2; // offset: 2 (0x2)
> >>>>>> - uint32_t reserved_3; // offset: 3 (0x3)
> >>>>>> - uint32_t reserved_4; // offset: 4 (0x4)
> >>>>>> - uint32_t reserved_5; // offset: 5 (0x5)
> >>>>>> - uint32_t reserved_6; // offset: 6 (0x6)
> >>>>>> - uint32_t reserved_7; // offset: 7 (0x7)
> >>>>>> + uint32_t shadow_base_lo; // offset: 0 (0x0)
> >>>>>> + uint32_t shadow_base_hi; // offset: 1 (0x1)
> >>>>>> + uint32_t gds_bkup_base_lo; // offset: 2 (0x2)
> >>>>>> + uint32_t gds_bkup_base_hi; // offset: 3 (0x3)
> >>>>>> + uint32_t fw_work_area_base_lo; // offset: 4 (0x4)
> >>>>>> + uint32_t fw_work_area_base_hi; // offset: 5 (0x5)
> >>>>>> + uint32_t shadow_initialized; // offset: 6 (0x6)
> >>>>>> + uint32_t ib_vmid; // offset: 7 (0x7)
> >>>>>> uint32_t reserved_8; // offset: 8 (0x8)
> >>>>>> uint32_t reserved_9; // offset: 9 (0x9)
> >>>>>> uint32_t reserved_10; // offset: 10 (0xA)
> >>>>>> --
> >>>>>> 2.34.1
> >>>>>>
More information about the amd-gfx
mailing list