[RFC PATCH 1/9] apple-gmux: use cpu_to_be32 instead of manual reorder

[Hans de Goede]

Hi,

On 2/10/23 20:09, Hans de Goede wrote:
> Hi,
> 
> On 2/10/23 05:48, Orlando Chamberlain wrote:
>> Currently it manually flips the byte order, but we can instead use
>> cpu_to_be32(val) for this.
>>
>> Signed-off-by: Orlando Chamberlain <orlandoch.dev at gmail.com>
>> ---
>>  drivers/platform/x86/apple-gmux.c | 18 ++----------------
>>  1 file changed, 2 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c
>> index 9333f82cfa8a..e8cb084cb81f 100644
>> --- a/drivers/platform/x86/apple-gmux.c
>> +++ b/drivers/platform/x86/apple-gmux.c
>> @@ -94,13 +94,7 @@ static u32 gmux_pio_read32(struct apple_gmux_data *gmux_data, int port)
>>  static void gmux_pio_write32(struct apple_gmux_data *gmux_data, int port,
>>  			     u32 val)
>>  {
>> -	int i;
>> -	u8 tmpval;
>> -
>> -	for (i = 0; i < 4; i++) {
>> -		tmpval = (val >> (i * 8)) & 0xff;
>> -		outb(tmpval, gmux_data->iostart + port + i);
>> -	}
>> +	outl(cpu_to_be32(val), gmux_data->iostart + port);
>>  }
>>  
>>  static int gmux_index_wait_ready(struct apple_gmux_data *gmux_data)
> 
> The ioport / indexed-ioport accessed apple_gmux-es likely are (part of?)
> LPC bus devices . Looking at the bus level you are now changing 4 io
> accesses with a size of 1 byte, to 1 32 bit io-access.
> 
> Depending on the decoding hw in the chip this may work fine,
> or this may work not at all.
> 
> I realized that you have asked for more testing, but most surviving
> macbooks from the older apple-gmux era appear to be models without
> a discrete GPU (which are often the first thing to break) and thus
> without a gmux.
> 
> Unless we get a bunch of testers to show up, which I doubt. I would
> prefer slightly bigger / less pretty code and not change the functional
> behavior of the driver on these older models.

A quick follow up on this, I just noticed that only the pio_write32
is doing the one byte at a time thing:

static u32 gmux_pio_read32(struct apple_gmux_data *gmux_data, int port)
{
        return inl(gmux_data->iostart + port);
}

static void gmux_pio_write32(struct apple_gmux_data *gmux_data, int port,
                             u32 val)
{
        int i;
        u8 tmpval;

        for (i = 0; i < 4; i++) {
                tmpval = (val >> (i * 8)) & 0xff;
                outb(tmpval, gmux_data->iostart + port + i);
        }
}

And if you look closely gmux_pio_write32() is not swapping
the order to be32 at all, it is just taking the bytes
in little-endian memory order, starting with the first
(index 0) byte which is the least significant byte of
the value.

On x86 the original code is no different then doing:

static void gmux_pio_write32(struct apple_gmux_data *gmux_data, int port,
                             u32 val)
{
        u8 *data = (u8 *)&val;
        int i;

        for (i = 0; i < 4; i++)
                outb(data[i], gmux_data->iostart + port + i);
}

So yeah this patch is definitely wrong, it actually swaps
the byte order compared to the original code. Which becomes
clear when you look the weird difference between the read32 and
write32 functions after this patch.

Presumably there is a specific reason why gmux_pio_write32()
is not already doing a single outl(..., val) and byte-ordering
is not the reason.

Regards,

Hans



>> @@ -177,16 +171,8 @@ static u32 gmux_index_read32(struct apple_gmux_data *gmux_data, int port)
>>  static void gmux_index_write32(struct apple_gmux_data *gmux_data, int port,
>>  			       u32 val)
>>  {
>> -	int i;
>> -	u8 tmpval;
>> -
>>  	mutex_lock(&gmux_data->index_lock);
>> -
>> -	for (i = 0; i < 4; i++) {
>> -		tmpval = (val >> (i * 8)) & 0xff;
>> -		outb(tmpval, gmux_data->iostart + GMUX_PORT_VALUE + i);
>> -	}
>> -
>> +	outl(cpu_to_be32(val), gmux_data->iostart + GMUX_PORT_VALUE);
>>  	gmux_index_wait_ready(gmux_data);
>>  	outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE);
>>  	gmux_index_wait_complete(gmux_data);
>