[PATCH 09/20] drm/amd/display: update pixel format in DP hw sequence

[Qingqing Zhuo]

From: Yihan Zhu <yihan.zhu at amd.com>

[WHY]
DP 420 formats do not light up because the pixel processing mode
of the DP_FORMAT is misprogrammed

[HOW]
Added appropriate programming for DP pixel format

Reviewed-by: Charlene Liu <Charlene.Liu at amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas at amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo at amd.com>
Signed-off-by: Yihan Zhu <yihan.zhu at amd.com>
---
 .../drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
index 962a2c02b422..742e43cb8880 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
@@ -296,12 +296,14 @@ static void enc314_stream_encoder_dp_unblank(
 		uint32_t n_vid = 0x8000;
 		uint32_t m_vid;
 		uint32_t n_multiply = 0;
+		uint32_t pix_per_cycle = 0;
 		uint64_t m_vid_l = n_vid;
 
 		/* YCbCr 4:2:0 : Computed VID_M will be 2X the input rate */
 		if (is_two_pixels_per_containter(&param->timing) || param->opp_cnt > 1) {
 			/*this logic should be the same in get_pixel_clock_parameters() */
 			n_multiply = 1;
+			pix_per_cycle = 1;
 		}
 		/* M / N = Fstream / Flink
 		 * m_vid / n_vid = pixel rate / link rate
@@ -329,6 +331,10 @@ static void enc314_stream_encoder_dp_unblank(
 		REG_UPDATE_2(DP_VID_TIMING,
 				DP_VID_M_N_GEN_EN, 1,
 				DP_VID_N_MUL, n_multiply);
+
+		REG_UPDATE(DP_PIXEL_FORMAT,
+				DP_PIXEL_PER_CYCLE_PROCESSING_MODE,
+				pix_per_cycle);
 	}
 
 	/* make sure stream is disabled before resetting steer fifo */
-- 
2.34.1