[PATCH 25/37] drm/amd/display: Remove unused code
Rodrigo Siqueira
Rodrigo.Siqueira at amd.com
Tue Jan 10 16:55:23 UTC 2023
Remove some code that is never used from freesync file.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
---
.../amd/display/modules/freesync/freesync.c | 44 -------------------
1 file changed, 44 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
index c2e00f7b8381..e61cfce9f77c 100644
--- a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
+++ b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
@@ -898,35 +898,9 @@ static void build_vrr_infopacket_v2(enum signal_type signal,
infopacket->valid = true;
}
-#ifndef TRIM_FSFT
-static void build_vrr_infopacket_fast_transport_data(
- bool ftActive,
- unsigned int ftOutputRate,
- struct dc_info_packet *infopacket)
-{
- /* PB9 : bit7 - fast transport Active*/
- unsigned char activeBit = (ftActive) ? 1 << 7 : 0;
-
- infopacket->sb[1] &= ~activeBit; //clear bit
- infopacket->sb[1] |= activeBit; //set bit
-
- /* PB13 : Target Output Pixel Rate [kHz] - bits 7:0 */
- infopacket->sb[13] = ftOutputRate & 0xFF;
-
- /* PB14 : Target Output Pixel Rate [kHz] - bits 15:8 */
- infopacket->sb[14] = (ftOutputRate >> 8) & 0xFF;
-
- /* PB15 : Target Output Pixel Rate [kHz] - bits 23:16 */
- infopacket->sb[15] = (ftOutputRate >> 16) & 0xFF;
-
-}
-#endif
static void build_vrr_infopacket_v3(enum signal_type signal,
const struct mod_vrr_params *vrr,
-#ifndef TRIM_FSFT
- bool ftActive, unsigned int ftOutputRate,
-#endif
enum color_transfer_func app_tf,
struct dc_info_packet *infopacket)
{
@@ -937,13 +911,6 @@ static void build_vrr_infopacket_v3(enum signal_type signal,
build_vrr_infopacket_fs2_data(app_tf, infopacket);
-#ifndef TRIM_FSFT
- build_vrr_infopacket_fast_transport_data(
- ftActive,
- ftOutputRate,
- infopacket);
-#endif
-
build_vrr_infopacket_checksum(&payload_size, infopacket);
infopacket->valid = true;
@@ -985,18 +952,7 @@ void mod_freesync_build_vrr_infopacket(struct mod_freesync *mod_freesync,
switch (packet_type) {
case PACKET_TYPE_FS_V3:
-#ifndef TRIM_FSFT
- // always populate with pixel rate.
- build_vrr_infopacket_v3(
- stream->signal, vrr,
- stream->timing.flags.FAST_TRANSPORT,
- (stream->timing.flags.FAST_TRANSPORT) ?
- stream->timing.fast_transport_output_rate_100hz :
- stream->timing.pix_clk_100hz,
- app_tf, infopacket);
-#else
build_vrr_infopacket_v3(stream->signal, vrr, app_tf, infopacket);
-#endif
break;
case PACKET_TYPE_FS_V2:
build_vrr_infopacket_v2(stream->signal, vrr, app_tf, infopacket, stream->freesync_on_desktop);
--
2.39.0
More information about the amd-gfx
mailing list