[PATCH 15/33] drm/amd/display: link link_dp_dpia_bw.o in makefile
Qingqing Zhuo
qingqing.zhuo at amd.com
Fri Mar 3 15:40:04 UTC 2023
From: Wenjing Liu <wenjing.liu at amd.com>
[Why & How]
- We have added link_dp_dpia_bw code but it is not currently
added in makefile. We are adding this to makefile so it would
be built.
- Remove unused dc_link.h
Reviewed-by: Jun Lei <Jun.Lei at amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo at amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu at amd.com>
---
drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 66 +-
drivers/gpu/drm/amd/display/dc/dc_link.h | 579 ------------------
drivers/gpu/drm/amd/display/dc/link/Makefile | 2 +-
.../dc/link/protocols/link_dp_dpia_bw.c | 31 +-
.../dc/link/protocols/link_dp_dpia_bw.h | 2 +-
5 files changed, 68 insertions(+), 612 deletions(-)
delete mode 100644 drivers/gpu/drm/amd/display/dc/dc_link.h
diff --git a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
index 4bccce94d83b..af53278662ec 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
@@ -921,12 +921,6 @@ struct dpcd_usb4_dp_tunneling_info {
#ifndef DP_DFP_CAPABILITY_EXTENSION_SUPPORT
#define DP_DFP_CAPABILITY_EXTENSION_SUPPORT 0x0A3
#endif
-#ifndef DP_LINK_SQUARE_PATTERN
-#define DP_LINK_SQUARE_PATTERN 0x10F
-#endif
-#ifndef DP_CABLE_ATTRIBUTES_UPDATED_BY_DPTX
-#define DP_CABLE_ATTRIBUTES_UPDATED_BY_DPTX 0x110
-#endif
#ifndef DP_DSC_CONFIGURATION
#define DP_DSC_CONFIGURATION 0x161
#endif
@@ -939,12 +933,6 @@ struct dpcd_usb4_dp_tunneling_info {
#ifndef DP_128b_132b_TRAINING_AUX_RD_INTERVAL
#define DP_128b_132b_TRAINING_AUX_RD_INTERVAL 0x2216
#endif
-#ifndef DP_LINK_SQUARE_PATTERN
-#define DP_LINK_SQUARE_PATTERN 0x10F
-#endif
-#ifndef DP_CABLE_ATTRIBUTES_UPDATED_BY_DPRX
-#define DP_CABLE_ATTRIBUTES_UPDATED_BY_DPRX 0x2217
-#endif
#ifndef DP_TEST_264BIT_CUSTOM_PATTERN_7_0
#define DP_TEST_264BIT_CUSTOM_PATTERN_7_0 0X2230
#endif
@@ -988,10 +976,6 @@ struct dpcd_usb4_dp_tunneling_info {
#define DP_INTRA_HOP_AUX_REPLY_INDICATION (1 << 3)
/* TODO - Use DRM header to replace above once available */
#endif // DP_INTRA_HOP_AUX_REPLY_INDICATION
-
-#ifndef DP_REPEATER_CONFIGURATION_AND_STATUS_SIZE
-#define DP_REPEATER_CONFIGURATION_AND_STATUS_SIZE 0x50
-#endif
union dp_main_line_channel_coding_cap {
struct {
uint8_t DP_8b_10b_SUPPORTED :1;
@@ -1368,4 +1352,54 @@ struct dp_trace {
bool is_initialized;
struct edp_trace_power_timestamps edp_trace_power_timestamps;
};
+
+/* TODO - This is a temporary location for any new DPCD definitions.
+ * We should move these to drm_dp header.
+ */
+#ifndef DP_LINK_SQUARE_PATTERN
+#define DP_LINK_SQUARE_PATTERN 0x10F
+#endif
+#ifndef DP_CABLE_ATTRIBUTES_UPDATED_BY_DPRX
+#define DP_CABLE_ATTRIBUTES_UPDATED_BY_DPRX 0x2217
+#endif
+#ifndef DP_CABLE_ATTRIBUTES_UPDATED_BY_DPTX
+#define DP_CABLE_ATTRIBUTES_UPDATED_BY_DPTX 0x110
+#endif
+#ifndef DP_REPEATER_CONFIGURATION_AND_STATUS_SIZE
+#define DP_REPEATER_CONFIGURATION_AND_STATUS_SIZE 0x50
+#endif
+#ifndef DP_TUNNELING_IRQ
+#define DP_TUNNELING_IRQ (1 << 5)
+#endif
+/** USB4 DPCD BW Allocation Registers Chapter 10.7 **/
+#ifndef DP_TUNNELING_CAPABILITIES
+#define DP_TUNNELING_CAPABILITIES 0xE000D /* 1.4a */
+#endif
+#ifndef USB4_DRIVER_ID
+#define USB4_DRIVER_ID 0xE000F /* 1.4a */
+#endif
+#ifndef USB4_DRIVER_BW_CAPABILITY
+#define USB4_DRIVER_BW_CAPABILITY 0xE0020 /* 1.4a */
+#endif
+#ifndef DP_IN_ADAPTER_TUNNEL_INFO
+#define DP_IN_ADAPTER_TUNNEL_INFO 0xE0021 /* 1.4a */
+#endif
+#ifndef DP_BW_GRANULALITY
+#define DP_BW_GRANULALITY 0xE0022 /* 1.4a */
+#endif
+#ifndef ESTIMATED_BW
+#define ESTIMATED_BW 0xE0023 /* 1.4a */
+#endif
+#ifndef ALLOCATED_BW
+#define ALLOCATED_BW 0xE0024 /* 1.4a */
+#endif
+#ifndef DP_TUNNELING_STATUS
+#define DP_TUNNELING_STATUS 0xE0025 /* 1.4a */
+#endif
+#ifndef DPTX_BW_ALLOCATION_MODE_CONTROL
+#define DPTX_BW_ALLOCATION_MODE_CONTROL 0xE0030 /* 1.4a */
+#endif
+#ifndef REQUESTED_BW
+#define REQUESTED_BW 0xE0031 /* 1.4a */
+#endif
#endif /* DC_DP_TYPES_H */
diff --git a/drivers/gpu/drm/amd/display/dc/dc_link.h b/drivers/gpu/drm/amd/display/dc/dc_link.h
deleted file mode 100644
index 80e18c770cda..000000000000
--- a/drivers/gpu/drm/amd/display/dc/dc_link.h
+++ /dev/null
@@ -1,579 +0,0 @@
-/*
- * Copyright 2012-14 Advanced Micro Devices, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors: AMD
- *
- */
-
-#ifndef DC_LINK_H_
-#define DC_LINK_H_
-
-#include "dc.h"
-#include "dc_types.h"
-#include "grph_object_defs.h"
-
-struct link_resource;
-enum aux_return_code_type;
-
-enum dc_link_fec_state {
- dc_link_fec_not_ready,
- dc_link_fec_ready,
- dc_link_fec_enabled
-};
-
-/* DP MST stream allocation (payload bandwidth number) */
-struct link_mst_stream_allocation {
- /* DIG front */
- const struct stream_encoder *stream_enc;
- /* HPO DP Stream Encoder */
- const struct hpo_dp_stream_encoder *hpo_dp_stream_enc;
- /* associate DRM payload table with DC stream encoder */
- uint8_t vcp_id;
- /* number of slots required for the DP stream in transport packet */
- uint8_t slot_count;
-};
-
-/* DP MST stream allocation table */
-struct link_mst_stream_allocation_table {
- /* number of DP video streams */
- int stream_count;
- /* array of stream allocations */
- struct link_mst_stream_allocation stream_allocations[MAX_CONTROLLER_NUM];
-};
-
-struct edp_trace_power_timestamps {
- uint64_t poweroff;
- uint64_t poweron;
-};
-
-struct dp_trace_lt_counts {
- unsigned int total;
- unsigned int fail;
-};
-
-struct dp_trace_lt {
- struct dp_trace_lt_counts counts;
- struct dp_trace_timestamps {
- unsigned long long start;
- unsigned long long end;
- } timestamps;
- enum link_training_result result;
- bool is_logged;
-};
-
-struct dp_trace {
- struct dp_trace_lt detect_lt_trace;
- struct dp_trace_lt commit_lt_trace;
- unsigned int link_loss_count;
- bool is_initialized;
- struct edp_trace_power_timestamps edp_trace_power_timestamps;
-};
-
-/* PSR feature flags */
-struct psr_settings {
- bool psr_feature_enabled; // PSR is supported by sink
- bool psr_allow_active; // PSR is currently active
- enum dc_psr_version psr_version; // Internal PSR version, determined based on DPCD
- bool psr_vtotal_control_support; // Vtotal control is supported by sink
- unsigned long long psr_dirty_rects_change_timestamp_ns; // for delay of enabling PSR-SU
-
- /* These parameters are calculated in Driver,
- * based on display timing and Sink capabilities.
- * If VBLANK region is too small and Sink takes a long time
- * to set up RFB, it may take an extra frame to enter PSR state.
- */
- bool psr_frame_capture_indication_req;
- unsigned int psr_sdp_transmit_line_num_deadline;
- uint8_t force_ffu_mode;
- unsigned int psr_power_opt;
-};
-
-/* To split out "global" and "per-panel" config settings.
- * Add a struct dc_panel_config under dc_link
- */
-struct dc_panel_config {
- /* extra panel power sequence parameters */
- struct pps {
- unsigned int extra_t3_ms;
- unsigned int extra_t7_ms;
- unsigned int extra_delay_backlight_off;
- unsigned int extra_post_t7_ms;
- unsigned int extra_pre_t11_ms;
- unsigned int extra_t12_ms;
- unsigned int extra_post_OUI_ms;
- } pps;
- /* PSR */
- struct psr {
- bool disable_psr;
- bool disallow_psrsu;
- bool rc_disable;
- bool rc_allow_static_screen;
- bool rc_allow_fullscreen_VPB;
- } psr;
- /* ABM */
- struct varib {
- unsigned int varibright_feature_enable;
- unsigned int def_varibright_level;
- unsigned int abm_config_setting;
- } varib;
- /* edp DSC */
- struct dsc {
- bool disable_dsc_edp;
- unsigned int force_dsc_edp_policy;
- } dsc;
- /* eDP ILR */
- struct ilr {
- bool optimize_edp_link_rate; /* eDP ILR */
- } ilr;
-};
-
-/*
- * USB4 DPIA BW ALLOCATION STRUCTS
- */
-struct dc_dpia_bw_alloc {
- int sink_verified_bw; // The Verified BW that sink can allocated and use that has been verified already
- int sink_allocated_bw; // The Actual Allocated BW that sink currently allocated
- int sink_max_bw; // The Max BW that sink can require/support
- int estimated_bw; // The estimated available BW for this DPIA
- int bw_granularity; // BW Granularity
- bool bw_alloc_enabled; // The BW Alloc Mode Support is turned ON for all 3: DP-Tx & Dpia & CM
- bool response_ready; // Response ready from the CM side
-};
-
-#define MAX_SINKS_PER_LINK 4
-
-/*
- * A link contains one or more sinks and their connected status.
- * The currently active signal type (HDMI, DP-SST, DP-MST) is also reported.
- */
-struct dc_link {
- struct dc_sink *remote_sinks[MAX_SINKS_PER_LINK];
- unsigned int sink_count;
- struct dc_sink *local_sink;
- unsigned int link_index;
- enum dc_connection_type type;
- enum signal_type connector_signal;
- enum dc_irq_source irq_source_hpd;
- enum dc_irq_source irq_source_hpd_rx;/* aka DP Short Pulse */
- bool is_hpd_filter_disabled;
- bool dp_ss_off;
-
- /**
- * @link_state_valid:
- *
- * If there is no link and local sink, this variable should be set to
- * false. Otherwise, it should be set to true; usually, the function
- * core_link_enable_stream sets this field to true.
- */
- bool link_state_valid;
- bool aux_access_disabled;
- bool sync_lt_in_progress;
- bool is_internal_display;
-
- /* TODO: Rename. Flag an endpoint as having a programmable mapping to a
- * DIG encoder. */
- bool is_dig_mapping_flexible;
- bool hpd_status; /* HPD status of link without physical HPD pin. */
- bool is_hpd_pending; /* Indicates a new received hpd */
- bool is_automated; /* Indicates automated testing */
-
- bool edp_sink_present;
-
- struct dp_trace dp_trace;
-
- /* caps is the same as reported_link_cap. link_traing use
- * reported_link_cap. Will clean up. TODO
- */
- struct dc_link_settings reported_link_cap;
- struct dc_link_settings verified_link_cap;
- struct dc_link_settings cur_link_settings;
- struct dc_lane_settings cur_lane_setting[LANE_COUNT_DP_MAX];
- struct dc_link_settings preferred_link_setting;
- /* preferred_training_settings are override values that
- * come from DM. DM is responsible for the memory
- * management of the override pointers.
- */
- struct dc_link_training_overrides preferred_training_settings;
- struct dp_audio_test_data audio_test_data;
-
- uint8_t ddc_hw_inst;
-
- uint8_t hpd_src;
-
- uint8_t link_enc_hw_inst;
- /* DIG link encoder ID. Used as index in link encoder resource pool.
- * For links with fixed mapping to DIG, this is not changed after dc_link
- * object creation.
- */
- enum engine_id eng_id;
-
- bool test_pattern_enabled;
- union compliance_test_state compliance_test_state;
-
- void *priv;
-
- struct ddc_service *ddc;
-
- bool aux_mode;
-
- /* Private to DC core */
-
- const struct dc *dc;
-
- struct dc_context *ctx;
-
- struct panel_cntl *panel_cntl;
- struct link_encoder *link_enc;
- struct graphics_object_id link_id;
- /* Endpoint type distinguishes display endpoints which do not have entries
- * in the BIOS connector table from those that do. Helps when tracking link
- * encoder to display endpoint assignments.
- */
- enum display_endpoint_type ep_type;
- union ddi_channel_mapping ddi_channel_mapping;
- struct connector_device_tag_info device_tag;
- struct dpcd_caps dpcd_caps;
- uint32_t dongle_max_pix_clk;
- unsigned short chip_caps;
- unsigned int dpcd_sink_count;
-#if defined(CONFIG_DRM_AMD_DC_HDCP)
- struct hdcp_caps hdcp_caps;
-#endif
- enum edp_revision edp_revision;
- union dpcd_sink_ext_caps dpcd_sink_ext_caps;
-
- struct psr_settings psr_settings;
-
- /* Drive settings read from integrated info table */
- struct dc_lane_settings bios_forced_drive_settings;
-
- /* Vendor specific LTTPR workaround variables */
- uint8_t vendor_specific_lttpr_link_rate_wa;
- bool apply_vendor_specific_lttpr_link_rate_wa;
-
- /* MST record stream using this link */
- struct link_flags {
- bool dp_keep_receiver_powered;
- bool dp_skip_DID2;
- bool dp_skip_reset_segment;
- bool dp_skip_fs_144hz;
- bool dp_mot_reset_segment;
- /* Some USB4 docks do not handle turning off MST DSC once it has been enabled. */
- bool dpia_mst_dsc_always_on;
- /* Forced DPIA into TBT3 compatibility mode. */
- bool dpia_forced_tbt3_mode;
- bool dongle_mode_timing_override;
- } wa_flags;
- struct link_mst_stream_allocation_table mst_stream_alloc_table;
-
- struct dc_link_status link_status;
- struct dprx_states dprx_states;
-
- struct gpio *hpd_gpio;
- enum dc_link_fec_state fec_state;
- bool link_powered_externally; // Used to bypass hardware sequencing delays when panel is powered down forcibly
-
- struct dc_panel_config panel_config;
- struct phy_state phy_state;
- // BW ALLOCATON USB4 ONLY
- struct dc_dpia_bw_alloc dpia_bw_alloc_config;
-};
-
-
-/**
- * dc_get_link_at_index() - Return an enumerated dc_link.
- *
- * dc_link order is constant and determined at
- * boot time. They cannot be created or destroyed.
- * Use dc_get_caps() to get number of links.
- */
-static inline struct dc_link *dc_get_link_at_index(struct dc *dc, uint32_t link_index)
-{
- return dc->links[link_index];
-}
-
-static inline void get_edp_links(const struct dc *dc,
- struct dc_link **edp_links,
- int *edp_num)
-{
- int i;
-
- *edp_num = 0;
- for (i = 0; i < dc->link_count; i++) {
- // report any eDP links, even unconnected DDI's
- if (!dc->links[i])
- continue;
- if (dc->links[i]->connector_signal == SIGNAL_TYPE_EDP) {
- edp_links[*edp_num] = dc->links[i];
- if (++(*edp_num) == MAX_NUM_EDP)
- return;
- }
- }
-}
-
-static inline bool dc_get_edp_link_panel_inst(const struct dc *dc,
- const struct dc_link *link,
- unsigned int *inst_out)
-{
- struct dc_link *edp_links[MAX_NUM_EDP];
- int edp_num, i;
-
- *inst_out = 0;
- if (link->connector_signal != SIGNAL_TYPE_EDP)
- return false;
- get_edp_links(dc, edp_links, &edp_num);
- for (i = 0; i < edp_num; i++) {
- if (link == edp_links[i])
- break;
- (*inst_out)++;
- }
- return true;
-}
-
-/* Set backlight level of an embedded panel (eDP, LVDS).
- * backlight_pwm_u16_16 is unsigned 32 bit with 16 bit integer
- * and 16 bit fractional, where 1.0 is max backlight value.
- */
-bool dc_link_set_backlight_level(const struct dc_link *dc_link,
- uint32_t backlight_pwm_u16_16,
- uint32_t frame_ramp);
-
-/* Set/get nits-based backlight level of an embedded panel (eDP, LVDS). */
-bool dc_link_set_backlight_level_nits(struct dc_link *link,
- bool isHDR,
- uint32_t backlight_millinits,
- uint32_t transition_time_in_ms);
-
-bool dc_link_get_backlight_level_nits(struct dc_link *link,
- uint32_t *backlight_millinits,
- uint32_t *backlight_millinits_peak);
-
-int dc_link_get_backlight_level(const struct dc_link *dc_link);
-
-int dc_link_get_target_backlight_pwm(const struct dc_link *link);
-
-bool dc_link_set_psr_allow_active(struct dc_link *dc_link, const bool *enable,
- bool wait, bool force_static, const unsigned int *power_opts);
-
-bool dc_link_get_psr_state(const struct dc_link *dc_link, enum dc_psr_state *state);
-
-bool dc_link_setup_psr(struct dc_link *dc_link,
- const struct dc_stream_state *stream, struct psr_config *psr_config,
- struct psr_context *psr_context);
-
-bool dc_link_get_hpd_state(struct dc_link *dc_link);
-
-/* Notify DC about DP RX Interrupt (aka Short Pulse Interrupt).
- * Return:
- * true - Downstream port status changed. DM should call DC to do the
- * detection.
- * false - no change in Downstream port status. No further action required
- * from DM. */
-bool dc_link_handle_hpd_rx_irq(struct dc_link *dc_link,
- union hpd_irq_data *hpd_irq_dpcd_data, bool *out_link_loss,
- bool defer_handling, bool *has_left_work);
-
-/*
- * On eDP links this function call will stall until T12 has elapsed.
- * If the panel is not in power off state, this function will return
- * immediately.
- */
-bool dc_link_wait_for_t12(struct dc_link *link);
-
-void dc_link_dp_handle_automated_test(struct dc_link *link);
-void dc_link_dp_handle_link_loss(struct dc_link *link);
-bool dc_link_dp_allow_hpd_rx_irq(const struct dc_link *link);
-bool dc_link_check_link_loss_status(struct dc_link *link,
- union hpd_irq_data *hpd_irq_dpcd_data);
-enum dc_status dc_link_dp_read_hpd_rx_irq_data(
- struct dc_link *link,
- union hpd_irq_data *irq_data);
-struct dc_sink_init_data;
-
-struct dc_sink *dc_link_add_remote_sink(
- struct dc_link *dc_link,
- const uint8_t *edid,
- int len,
- struct dc_sink_init_data *init_data);
-
-void dc_link_remove_remote_sink(
- struct dc_link *link,
- struct dc_sink *sink);
-
-/* Used by diagnostics for virtual link at the moment */
-
-bool dc_link_dp_set_test_pattern(
- struct dc_link *link,
- enum dp_test_pattern test_pattern,
- enum dp_test_pattern_color_space test_pattern_color_space,
- const struct link_training_settings *p_link_settings,
- const unsigned char *p_custom_pattern,
- unsigned int cust_pattern_size);
-
-bool dc_link_dp_get_max_link_enc_cap(const struct dc_link *link, struct dc_link_settings *max_link_enc_cap);
-
-/**
- *****************************************************************************
- * Function: dc_link_enable_hpd_filter
- *
- * @brief
- * If enable is true, programs HPD filter on associated HPD line to default
- * values dependent on link->connector_signal
- *
- * If enable is false, programs HPD filter on associated HPD line with no
- * delays on connect or disconnect
- *
- * @param [in] link: pointer to the dc link
- * @param [in] enable: boolean specifying whether to enable hbd
- *****************************************************************************
- */
-void dc_link_enable_hpd_filter(struct dc_link *link, bool enable);
-
-bool dc_link_is_dp_sink_present(struct dc_link *link);
-/*
- * DPCD access interfaces
- */
-
-void dc_link_set_drive_settings(struct dc *dc,
- struct link_training_settings *lt_settings,
- const struct dc_link *link);
-void dc_link_set_preferred_link_settings(struct dc *dc,
- struct dc_link_settings *link_setting,
- struct dc_link *link);
-void dc_link_set_preferred_training_settings(struct dc *dc,
- struct dc_link_settings *link_setting,
- struct dc_link_training_overrides *lt_overrides,
- struct dc_link *link,
- bool skip_immediate_retrain);
-void dc_link_enable_hpd(const struct dc_link *link);
-void dc_link_disable_hpd(const struct dc_link *link);
-void dc_link_set_test_pattern(struct dc_link *link,
- enum dp_test_pattern test_pattern,
- enum dp_test_pattern_color_space test_pattern_color_space,
- const struct link_training_settings *p_link_settings,
- const unsigned char *p_custom_pattern,
- unsigned int cust_pattern_size);
-
-const struct dc_link_settings *dc_link_get_link_cap(
- const struct dc_link *link);
-
-void dc_link_overwrite_extended_receiver_cap(
- struct dc_link *link);
-
-bool dc_is_oem_i2c_device_present(
- struct dc *dc,
- size_t slave_address
-);
-
-bool dc_submit_i2c(
- struct dc *dc,
- uint32_t link_index,
- struct i2c_command *cmd);
-
-bool dc_submit_i2c_oem(
- struct dc *dc,
- struct i2c_command *cmd);
-
-bool dc_link_is_fec_supported(const struct dc_link *link);
-bool dc_link_should_enable_fec(const struct dc_link *link);
-
-uint32_t dc_link_bw_kbps_from_raw_frl_link_rate_data(uint8_t bw);
-enum dp_link_encoding dc_link_dp_mst_decide_link_encoding_format(const struct dc_link *link);
-
-/* take a snapshot of current link resource allocation state */
-void dc_get_cur_link_res_map(const struct dc *dc, uint32_t *map);
-/* restore link resource allocation state from a snapshot */
-void dc_restore_link_res_map(const struct dc *dc, uint32_t *map);
-void dp_trace_reset(struct dc_link *link);
-bool dc_dp_trace_is_initialized(struct dc_link *link);
-unsigned long long dc_dp_trace_get_lt_end_timestamp(struct dc_link *link,
- bool in_detection);
-void dc_dp_trace_set_is_logged_flag(struct dc_link *link,
- bool in_detection,
- bool is_logged);
-bool dc_dp_trace_is_logged(struct dc_link *link,
- bool in_detection);
-struct dp_trace_lt_counts *dc_dp_trace_get_lt_counts(struct dc_link *link,
- bool in_detection);
-unsigned int dc_dp_trace_get_link_loss_count(struct dc_link *link);
-
-/* Attempt to transfer the given aux payload. This function does not perform
- * retries or handle error states. The reply is returned in the payload->reply
- * and the result through operation_result. Returns the number of bytes
- * transferred,or -1 on a failure.
- */
-int dc_link_aux_transfer_raw(struct ddc_service *ddc,
- struct aux_payload *payload,
- enum aux_return_code_type *operation_result);
-
-enum lttpr_mode dc_link_decide_lttpr_mode(struct dc_link *link,
- struct dc_link_settings *link_setting);
-void dc_link_dp_receiver_power_ctrl(struct dc_link *link, bool on);
-bool dc_link_decide_edp_link_settings(struct dc_link *link,
- struct dc_link_settings *link_setting,
- uint32_t req_bw);
-void dc_link_edp_panel_backlight_power_on(struct dc_link *link,
- bool wait_for_hpd);
-
-/*
- * USB4 DPIA BW ALLOCATION PUBLIC FUNCTIONS
- */
-/*
- * Send a request from DP-Tx requesting to allocate BW remotely after
- * allocating it locally. This will get processed by CM and a CB function
- * will be called.
- *
- * @link: pointer to the dc_link struct instance
- * @req_bw: The requested bw in Kbyte to allocated
- *
- * return: none
- */
-void dc_link_set_usb4_req_bw_req(struct dc_link *link, int req_bw);
-
-/*
- * Handle function for when the status of the Request above is complete.
- * We will find out the result of allocating on CM and update structs.
- *
- * @link: pointer to the dc_link struct instance
- * @bw: Allocated or Estimated BW depending on the result
- * @result: Response type
- *
- * return: none
- */
-void dc_link_handle_usb4_bw_alloc_response(struct dc_link *link, uint8_t bw, uint8_t result);
-
-/*
- * Handle the USB4 BW Allocation related functionality here:
- * Plug => Try to allocate max bw from timing parameters supported by the sink
- * Unplug => de-allocate bw
- *
- * @link: pointer to the dc_link struct instance
- * @peak_bw: Peak bw used by the link/sink
- *
- * return: allocated bw else return 0
- */
-int dc_link_dp_dpia_handle_usb4_bandwidth_allocation_for_link(struct dc_link *link, int peak_bw);
-
-/* TODO: this is not meant to be exposed to DM. Should switch to stream update
- * interface i.e stream_update->dsc_config
- */
-bool dc_link_update_dsc_config(struct pipe_ctx *pipe_ctx);
-#endif /* DC_LINK_H_ */
diff --git a/drivers/gpu/drm/amd/display/dc/link/Makefile b/drivers/gpu/drm/amd/display/dc/link/Makefile
index 40352d8d7648..a52b56e2859e 100644
--- a/drivers/gpu/drm/amd/display/dc/link/Makefile
+++ b/drivers/gpu/drm/amd/display/dc/link/Makefile
@@ -55,7 +55,7 @@ LINK_PROTOCOLS = link_hpd.o link_ddc.o link_dpcd.o link_dp_dpia.o \
link_dp_training.o link_dp_training_8b_10b.o link_dp_training_128b_132b.o \
link_dp_training_dpia.o link_dp_training_auxless.o \
link_dp_training_fixed_vs_pe_retimer.o link_dp_phy.o link_dp_capability.o \
-link_edp_panel_control.o link_dp_irq_handler.o
+link_edp_panel_control.o link_dp_irq_handler.o link_dp_dpia_bw.o
AMD_DAL_LINK_PROTOCOLS = $(addprefix $(AMDDALPATH)/dc/link/protocols/, \
$(LINK_PROTOCOLS))
diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c
index c950857ef02c..65f43572011b 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c
@@ -26,10 +26,9 @@
/*********************************************************************/
// USB4 DPIA BANDWIDTH ALLOCATION LOGIC
/*********************************************************************/
-#include "dc.h"
#include "link_dp_dpia_bw.h"
-#include "drm_dp_helper_dc.h"
#include "link_dpcd.h"
+#include "dc_dmub_srv.h"
#define DC_LOGGER \
link->ctx->logger
@@ -195,15 +194,13 @@ static int get_host_router_total_bw(struct dc_link *link, uint8_t type)
*/
static bool dpia_bw_alloc_unplug(struct dc_link *link)
{
- bool ret = false;
-
if (!link)
return true;
return deallocate_usb4_bw(&link->dpia_bw_alloc_config.sink_allocated_bw,
link->dpia_bw_alloc_config.sink_allocated_bw, link);
}
-static void dc_link_set_usb4_req_bw_req(struct dc_link *link, int req_bw)
+void dc_link_set_usb4_req_bw_req(struct dc_link *link, int req_bw)
{
uint8_t requested_bw;
uint32_t temp;
@@ -281,7 +278,6 @@ bool link_dp_dpia_set_dptx_usb4_bw_alloc_support(struct dc_link *link)
DC_LOG_DEBUG("%s: **** FAILURE Enabling DPtx BW Allocation Mode Support ***\n",
__func__);
} else {
-
// SUCCESS Enabled DPtx BW Allocation Mode Support
link->dpia_bw_alloc_config.bw_alloc_enabled = true;
DC_LOG_DEBUG("%s: **** SUCCESS Enabling DPtx BW Allocation Mode Support ***\n",
@@ -297,6 +293,11 @@ bool link_dp_dpia_set_dptx_usb4_bw_alloc_support(struct dc_link *link)
}
void dc_link_handle_usb4_bw_alloc_response(struct dc_link *link, uint8_t bw, uint8_t result)
{
+ int bw_needed = 0;
+ int available = 0;
+ int estimated = 0;
+ int host_router_total_estimated_bw = 0;
+
if (!get_bw_alloc_proceed_flag((link)))
return;
@@ -330,12 +331,12 @@ void dc_link_handle_usb4_bw_alloc_response(struct dc_link *link, uint8_t bw, uin
// 2. SUCCESS after prev. FAIL before any Pruning is done
// 3. SUCCESS after Pruning is done but before enabling link
- int needed = bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
+ bw_needed = bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
// 1.
if (!link->dpia_bw_alloc_config.sink_allocated_bw) {
- allocate_usb4_bw(&link->dpia_bw_alloc_config.sink_allocated_bw, needed, link);
+ allocate_usb4_bw(&link->dpia_bw_alloc_config.sink_allocated_bw, bw_needed, link);
link->dpia_bw_alloc_config.sink_verified_bw =
link->dpia_bw_alloc_config.sink_allocated_bw;
@@ -349,12 +350,12 @@ void dc_link_handle_usb4_bw_alloc_response(struct dc_link *link, uint8_t bw, uin
else if (link->dpia_bw_alloc_config.sink_allocated_bw) {
// Find out how much do we need to de-alloc
- if (link->dpia_bw_alloc_config.sink_allocated_bw > needed)
+ if (link->dpia_bw_alloc_config.sink_allocated_bw > bw_needed)
deallocate_usb4_bw(&link->dpia_bw_alloc_config.sink_allocated_bw,
- link->dpia_bw_alloc_config.sink_allocated_bw - needed, link);
+ link->dpia_bw_alloc_config.sink_allocated_bw - bw_needed, link);
else
allocate_usb4_bw(&link->dpia_bw_alloc_config.sink_allocated_bw,
- needed - link->dpia_bw_alloc_config.sink_allocated_bw, link);
+ bw_needed - link->dpia_bw_alloc_config.sink_allocated_bw, link);
}
// 4. If this is the 2nd sink then any unused bw will be reallocated to master DPIA
@@ -367,8 +368,8 @@ void dc_link_handle_usb4_bw_alloc_response(struct dc_link *link, uint8_t bw, uin
DC_LOG_DEBUG("%s: *** ESTIMATED BW CHANGED for DP-TX Request ***\n", __func__);
- int available = 0, estimated = bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
- int host_router_total_estimated_bw = get_host_router_total_bw(link, HOST_ROUTER_BW_ESTIMATED);
+ estimated = bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
+ host_router_total_estimated_bw = get_host_router_total_bw(link, HOST_ROUTER_BW_ESTIMATED);
// 1. If due to unplug of other sink
if (estimated == host_router_total_estimated_bw) {
@@ -415,7 +416,7 @@ int dc_link_dp_dpia_handle_usb4_bandwidth_allocation_for_link(struct dc_link *li
dc_link_set_usb4_req_bw_req(link, link->dpia_bw_alloc_config.sink_max_bw);
do {
- if (!timeout > 0)
+ if (!(timeout > 0))
timeout--;
else
break;
@@ -449,7 +450,7 @@ int link_dp_dpia_allocate_usb4_bandwidth_for_stream(struct dc_link *link, int re
if (req_bw != link->dpia_bw_alloc_config.sink_allocated_bw) {
dc_link_set_usb4_req_bw_req(link, req_bw);
do {
- if (!timeout > 0)
+ if (!(timeout > 0))
timeout--;
else
break;
diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h
index 46d141a1366f..e869e5e36568 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h
@@ -25,7 +25,7 @@
#ifndef DC_INC_LINK_DP_DPIA_BW_H_
#define DC_INC_LINK_DP_DPIA_BW_H_
-
+#include "link.h"
/*
* Host Router BW type
*/
--
2.34.1
More information about the amd-gfx
mailing list