[PATCH] drm/amd/display: Whitespace cleanup
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Mon Mar 27 16:07:54 UTC 2023
Commit 075e2099c32c ("drm/amd/display: Fix race condition in DPIA AUX
transfer") was backported to stable, which I noticed because of git
saying
linux-6.1/.git/rebase-apply/patch:37154: space before tab in indent.
while applying patch-6.1.21. While fixing the code location that issued
that warning, improve in few more places.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
Hello,
while reading through the driver I found a few more things that could be
improved. E.g
| @@ -2625,43 +2625,35 @@ static void emulated_link_detect(struct dc_link *link)
| dc_sink_release(prev_sink);
|
| switch (link->connector_signal) {
| - case SIGNAL_TYPE_HDMI_TYPE_A: {
| + case SIGNAL_TYPE_HDMI_TYPE_A:
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C;
| sink_caps.signal = SIGNAL_TYPE_HDMI_TYPE_A;
| break;
| - }
|
| - case SIGNAL_TYPE_DVI_SINGLE_LINK: {
| + case SIGNAL_TYPE_DVI_SINGLE_LINK:
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C;
| sink_caps.signal = SIGNAL_TYPE_DVI_SINGLE_LINK;
| break;
| - }
|
| - case SIGNAL_TYPE_DVI_DUAL_LINK: {
| + case SIGNAL_TYPE_DVI_DUAL_LINK:
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C;
| sink_caps.signal = SIGNAL_TYPE_DVI_DUAL_LINK;
| break;
| - }
|
| - case SIGNAL_TYPE_LVDS: {
| + case SIGNAL_TYPE_LVDS:
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C;
| sink_caps.signal = SIGNAL_TYPE_LVDS;
| break;
| - }
|
| - case SIGNAL_TYPE_EDP: {
| - sink_caps.transaction_type =
| - DDC_TRANSACTION_TYPE_I2C_OVER_AUX;
| + case SIGNAL_TYPE_EDP:
| + sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX;
| sink_caps.signal = SIGNAL_TYPE_EDP;
| break;
| - }
|
| - case SIGNAL_TYPE_DISPLAY_PORT: {
| - sink_caps.transaction_type =
| - DDC_TRANSACTION_TYPE_I2C_OVER_AUX;
| + case SIGNAL_TYPE_DISPLAY_PORT:
| + sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX;
| sink_caps.signal = SIGNAL_TYPE_VIRTUAL;
| break;
| - }
|
| default:
| DC_ERROR("Invalid connector type! signal:%d\n",
(hopefully that is quoted good enough not to be picked up by git)
Best regards
Uwe
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 26 +++++++++----------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 5bac5781a06b..78590e48e8d5 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2300,9 +2300,9 @@ static int dm_late_init(void *handle)
*/
params.min_abm_backlight = 0x28F;
/* In the case where abm is implemented on dmcub,
- * dmcu object will be null.
- * ABM 2.4 and up are implemented on dmcub.
- */
+ * dmcu object will be null.
+ * ABM 2.4 and up are implemented on dmcub.
+ */
if (dmcu) {
if (!dmcu_load_iram(dmcu, params))
return -EINVAL;
@@ -7106,13 +7106,13 @@ static uint add_fs_modes(struct amdgpu_dm_connector *aconnector)
/* Standard FPS values
*
* 23.976 - TV/NTSC
- * 24 - Cinema
- * 25 - TV/PAL
+ * 24 - Cinema
+ * 25 - TV/PAL
* 29.97 - TV/NTSC
- * 30 - TV/NTSC
- * 48 - Cinema HFR
- * 50 - TV/PAL
- * 60 - Commonly used
+ * 30 - TV/NTSC
+ * 48 - Cinema HFR
+ * 50 - TV/PAL
+ * 60 - Commonly used
* 48,72,96,120 - Multiples of 24
*/
static const u32 common_rates[] = {
@@ -7740,7 +7740,7 @@ static void update_freesync_state_on_stream(
return;
spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags);
- vrr_params = acrtc->dm_irq_params.vrr_params;
+ vrr_params = acrtc->dm_irq_params.vrr_params;
if (surface) {
mod_freesync_handle_preflip(
@@ -8321,7 +8321,7 @@ static void amdgpu_dm_commit_audio(struct drm_device *dev,
if (!drm_atomic_crtc_needs_modeset(new_crtc_state))
continue;
- notify:
+notify:
aconnector = to_amdgpu_dm_connector(connector);
mutex_lock(&adev->dm.audio_lock);
@@ -9337,7 +9337,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
skip_modeset:
/* Release extra reference */
if (new_stream)
- dc_stream_release(new_stream);
+ dc_stream_release(new_stream);
/*
* We want to do dc stream updates that do not require a
@@ -10671,7 +10671,7 @@ int amdgpu_dm_process_dmub_aux_transfer_sync(
if (!dc_process_dmub_aux_transfer_async(ctx->dc, link_index, payload)) {
*operation_result = AUX_RET_ERROR_ENGINE_ACQUIRE;
goto out;
- }
+ }
if (!wait_for_completion_timeout(&adev->dm.dmub_aux_transfer_done, 10 * HZ)) {
DRM_ERROR("wait_for_completion_timeout timeout!");
base-commit: e5dbf24e8b9e6aa0a185d86ce46a7a9c79ebb40f
--
2.39.2
More information about the amd-gfx
mailing list