[PATCH 7/8] drm/amd/display: Block SubVP on displays that have pixclk > 1800Mhz

[Alex Hung]

From: Alvin Lee <Alvin.Lee2 at amd.com>

[Description]
- Enabling SubVP on high refresh rate displays had a side effect
  of also enabling on high bandwidth displays such as 8K60
- However, these are not validated and should be blocked for
  the time being
- Block SubVP on displays that have pix rate > 1800Mhz (includes
  8K60 displays)

Reviewed-by: Jun Lei <Jun.Lei at amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar at amd.com>
Cc: Mario Limonciello <mario.limonciello at amd.com>
Cc: Alex Deucher <alexander.deucher at amd.com>
Cc: stable at vger.kernel.org
Acked-by: Alex Hung <alex.hung at amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2 at amd.com>
---
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h | 1 +
 drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c  | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h
index 04be01ae1ecf..42ccfd13a37c 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.h
@@ -41,6 +41,7 @@
 #define DCN3_2_DCFCLK_DS_INIT_KHZ 10000 // Choose 10Mhz for init DCFCLK DS freq
 #define DCN3_2_MIN_ACTIVE_SWITCH_MARGIN_FPO_US 100 // Only allow FPO + Vactive if active margin >= 100
 #define SUBVP_HIGH_REFRESH_LIST_LEN 3
+#define DCN3_2_MAX_SUBVP_PIXEL_RATE_MHZ 1800
 
 #define TO_DCN32_RES_POOL(pool)\
 	container_of(pool, struct dcn32_resource_pool, base)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index cd28980b2b56..f7e45d935a29 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -703,6 +703,7 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc,
 		 * - Not TMZ surface
 		 */
 		if (pipe->plane_state && !pipe->top_pipe && !dcn32_is_center_timing(pipe) &&
+				!(pipe->stream->timing.pix_clk_100hz / 10000 > DCN3_2_MAX_SUBVP_PIXEL_RATE_MHZ) &&
 				(!dcn32_is_psr_capable(pipe) || (context->stream_count == 1 && dc->caps.dmub_caps.subvp_psr)) &&
 				pipe->stream->mall_stream_config.type == SUBVP_NONE &&
 				(refresh_rate < 120 || dcn32_allow_subvp_high_refresh_rate(dc, context, pipe)) &&
-- 
2.40.0