[PATCH] drm/amd/pm: fix possible power mode mismatch between driver and PMFW

[Feng, Kenneth]

[AMD Official Use Only - General]

Reviewed-by: Kenneth Feng <kenneth.feng at amd.com>


-----Original Message-----
From: Quan, Evan <Evan.Quan at amd.com>
Sent: Friday, May 12, 2023 11:18 AM
To: amd-gfx at lists.freedesktop.org
Cc: Deucher, Alexander <Alexander.Deucher at amd.com>; Feng, Kenneth <Kenneth.Feng at amd.com>; Quan, Evan <Evan.Quan at amd.com>
Subject: [PATCH] drm/amd/pm: fix possible power mode mismatch between driver and PMFW

PMFW may boots the ASIC with a different power mode from the system's real one. Notify PMFW explicitly the power mode the system in. This is needed only when ACDC switch via gpio is not supported.

Signed-off-by: Evan Quan <evan.quan at amd.com>
---
 drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c     | 18 +++++++++++++++++
 .../gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c   | 20 +------------------
 .../drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c  |  1 +
 3 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
index 5633c5797e85..2ddf5198e5c4 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
@@ -733,6 +733,24 @@ static int smu_late_init(void *handle)
                return ret;
        }

+       /*
+        * Explicitly notify PMFW the power mode the system in. Since
+        * the PMFW may boot the ASIC with a different mode.
+        * For those supporting ACDC switch via gpio, PMFW will
+        * handle the switch automatically. Driver involvement
+        * is unnecessary.
+        */
+       if (!smu->dc_controlled_by_gpio) {
+               ret = smu_set_power_source(smu,
+                                          adev->pm.ac_power ? SMU_POWER_SOURCE_AC :
+                                          SMU_POWER_SOURCE_DC);
+               if (ret) {
+                       dev_err(adev->dev, "Failed to switch to %s mode!\n",
+                               adev->pm.ac_power ? "AC" : "DC");
+                       return ret;
+               }
+       }
+
        if ((adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 1)) ||
            (adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 3)))
                return 0;
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
index c4000518dc56..275f708db636 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
@@ -3413,26 +3413,8 @@ static int navi10_post_smu_init(struct smu_context *smu)
                return 0;

        ret = navi10_run_umc_cdr_workaround(smu);
-       if (ret) {
+       if (ret)
                dev_err(adev->dev, "Failed to apply umc cdr workaround!\n");
-               return ret;
-       }
-
-       if (!smu->dc_controlled_by_gpio) {
-               /*
-                * For Navi1X, manually switch it to AC mode as PMFW
-                * may boot it with DC mode.
-                */
-               ret = smu_v11_0_set_power_source(smu,
-                                                adev->pm.ac_power ?
-                                                SMU_POWER_SOURCE_AC :
-                                                SMU_POWER_SOURCE_DC);
-               if (ret) {
-                       dev_err(adev->dev, "Failed to switch to %s mode!\n",
-                                       adev->pm.ac_power ? "AC" : "DC");
-                       return ret;
-               }
-       }

        return ret;
 }
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
index 3d9ff46706fb..98a33f8ee209 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
@@ -1770,6 +1770,7 @@ static const struct pptable_funcs smu_v13_0_7_ppt_funcs = {
        .enable_mgpu_fan_boost = smu_v13_0_7_enable_mgpu_fan_boost,
        .get_power_limit = smu_v13_0_7_get_power_limit,
        .set_power_limit = smu_v13_0_set_power_limit,
+       .set_power_source = smu_v13_0_set_power_source,
        .get_power_profile_mode = smu_v13_0_7_get_power_profile_mode,
        .set_power_profile_mode = smu_v13_0_7_set_power_profile_mode,
        .set_tool_table_location = smu_v13_0_set_tool_table_location,
--
2.34.1