[PATCH v5 31/32] drm/amd/display: add plane CTM support

[Melissa Wen]

Map the plane CTM driver-specific property to DC plane, instead of DC
stream. The remaining steps to program DPP block are already implemented
on DC shared-code.

v3:
- fix comment about plane and CRTC CTMs priorities (Harry)

Reviewed-by: Harry Wentland <harry.wentland at amd.com>
Signed-off-by: Melissa Wen <mwen at igalia.com>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  1 +
 .../amd/display/amdgpu_dm/amdgpu_dm_color.c   | 26 +++++++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index ef39255bb37e..e5f1086da09f 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -9686,6 +9686,7 @@ static bool should_reset_plane(struct drm_atomic_state *state,
 		if (dm_old_other_state->degamma_tf != dm_new_other_state->degamma_tf ||
 		    dm_old_other_state->degamma_lut != dm_new_other_state->degamma_lut ||
 		    dm_old_other_state->hdr_mult != dm_new_other_state->hdr_mult ||
+		    dm_old_other_state->ctm != dm_new_other_state->ctm ||
 		    dm_old_other_state->shaper_lut != dm_new_other_state->shaper_lut ||
 		    dm_old_other_state->shaper_tf != dm_new_other_state->shaper_tf ||
 		    dm_old_other_state->lut3d != dm_new_other_state->lut3d ||
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
index 3eed47736b26..d52c3333ea13 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
@@ -1172,6 +1172,8 @@ int amdgpu_dm_update_plane_color_mgmt(struct dm_crtc_state *crtc,
 				      struct dc_plane_state *dc_plane_state)
 {
 	struct amdgpu_device *adev = drm_to_adev(crtc->base.state->dev);
+	struct dm_plane_state *dm_plane_state = to_dm_plane_state(plane_state);
+	struct drm_color_ctm *ctm = NULL;
 	struct dc_color_caps *color_caps = NULL;
 	bool has_crtc_cm_degamma;
 	int ret;
@@ -1224,5 +1226,29 @@ int amdgpu_dm_update_plane_color_mgmt(struct dm_crtc_state *crtc,
 			return ret;
 	}
 
+	/* Setup CRTC CTM. */
+	if (dm_plane_state->ctm) {
+		ctm = (struct drm_color_ctm *)dm_plane_state->ctm->data;
+		/*
+		 * DCN2 and older don't support both pre-blending and
+		 * post-blending gamut remap. For this HW family, if we have
+		 * the plane and CRTC CTMs simultaneously, CRTC CTM takes
+		 * priority, and we discard plane CTM, as implemented in
+		 * dcn10_program_gamut_remap(). However, DCN3+ has DPP
+		 * (pre-blending) and MPC (post-blending) `gamut remap` blocks;
+		 * therefore, we can program plane and CRTC CTMs together by
+		 * mapping CRTC CTM to MPC and keeping plane CTM setup at DPP,
+		 * as it's done by dcn30_program_gamut_remap().
+		 */
+		__drm_ctm_to_dc_matrix(ctm, dc_plane_state->gamut_remap_matrix.matrix);
+
+		dc_plane_state->gamut_remap_matrix.enable_remap = true;
+		dc_plane_state->input_csc_color_matrix.enable_adjustment = false;
+	} else {
+		/* Bypass CTM. */
+		dc_plane_state->gamut_remap_matrix.enable_remap = false;
+		dc_plane_state->input_csc_color_matrix.enable_adjustment = false;
+	}
+
 	return amdgpu_dm_plane_set_color_properties(plane_state, dc_plane_state);
 }
-- 
2.40.1