[PATCH 09/20] x86/mce/amd: Clean up SMCA configuration

[Yazen Ghannam]

The current SMCA configuration function does more than just configure
SMCA features. It also detects and caches the SMCA bank types.

However, the bank type caching flow will be removed during the init path
clean up.

Define a new function that only configures SMCA features. This will
operate on the MCA_CONFIG MSR, so include updated register field
definitions using bitops.

Leave old code until init path is cleaned up.

Signed-off-by: Yazen Ghannam <yazen.ghannam at amd.com>
---
 arch/x86/kernel/cpu/mce/amd.c | 84 ++++++++++++++++++++---------------
 1 file changed, 49 insertions(+), 35 deletions(-)

diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index 95843ac7979d..c8c92e048f56 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -50,9 +50,16 @@
 #define MASK_DEF_INT_TYPE	0x00000006
 #define DEF_LVT_OFF		0x2
 #define DEF_INT_TYPE_APIC	0x2
+#define INTR_TYPE_APIC			0x1
 
 /* Scalable MCA: */
 
+/* MCA_CONFIG register, one per MCA bank */
+#define CFG_DFR_INT_TYPE		GENMASK_ULL(38, 37)
+#define CFG_MCAX_EN			BIT_ULL(32)
+#define CFG_LSB_IN_STATUS		BIT_ULL(8)
+#define CFG_DFR_INT_SUPP		BIT_ULL(5)
+
 /* Threshold LVT offset is at MSR0xC0000410[15:12] */
 #define SMCA_THR_LVT_OFF	0xF000
 
@@ -350,45 +357,51 @@ static void smca_set_misc_banks_map(unsigned int bank, unsigned int cpu)
 
 }
 
-static void smca_configure(unsigned int bank, unsigned int cpu)
+/* Set appropriate bits in MCA_CONFIG. */
+static void configure_smca(unsigned int bank)
 {
-	u8 *bank_counts = this_cpu_ptr(smca_bank_counts);
-	const struct smca_hwid *s_hwid;
-	unsigned int i, hwid_mcatype;
-	u32 high, low;
-	u32 smca_config = MSR_AMD64_SMCA_MCx_CONFIG(bank);
+	u64 mca_config;
 
-	/* Set appropriate bits in MCA_CONFIG */
-	if (!rdmsr_safe(smca_config, &low, &high)) {
-		/*
-		 * OS is required to set the MCAX bit to acknowledge that it is
-		 * now using the new MSR ranges and new registers under each
-		 * bank. It also means that the OS will configure deferred
-		 * errors in the new MCx_CONFIG register. If the bit is not set,
-		 * uncorrectable errors will cause a system panic.
-		 *
-		 * MCA_CONFIG[MCAX] is bit 32 (0 in the high portion of the MSR.)
-		 */
-		high |= BIT(0);
+	if (!mce_flags.smca)
+		return;
 
-		/*
-		 * SMCA sets the Deferred Error Interrupt type per bank.
-		 *
-		 * MCA_CONFIG[DeferredIntTypeSupported] is bit 5, and tells us
-		 * if the DeferredIntType bit field is available.
-		 *
-		 * MCA_CONFIG[DeferredIntType] is bits [38:37] ([6:5] in the
-		 * high portion of the MSR). OS should set this to 0x1 to enable
-		 * APIC based interrupt. First, check that no interrupt has been
-		 * set.
-		 */
-		if ((low & BIT(5)) && !((high >> 5) & 0x3))
-			high |= BIT(5);
+	if (rdmsrl_safe(MSR_AMD64_SMCA_MCx_CONFIG(bank), &mca_config))
+		return;
+
+	/*
+	 * OS is required to set the MCAX enable bit to acknowledge that it is
+	 * now using the new MSR ranges and new registers under each
+	 * bank. It also means that the OS will configure deferred
+	 * errors in the new MCA_CONFIG register. If the bit is not set,
+	 * uncorrectable errors will cause a system panic.
+	 */
+	mca_config |= FIELD_PREP(CFG_MCAX_EN, 0x1);
 
-		this_cpu_ptr(mce_banks_array)[bank].lsb_in_status = !!(low & BIT(8));
+	/*
+	 * SMCA sets the Deferred Error Interrupt type per bank.
+	 *
+	 * MCA_CONFIG[DeferredIntTypeSupported] is bit 5, and tells us
+	 * if the DeferredIntType bit field is available.
+	 *
+	 * MCA_CONFIG[DeferredIntType] is bits [38:37]. OS should set
+	 * this to 0x1 to enable APIC based interrupt. First, check that
+	 * no interrupt has been set.
+	 */
+	if (FIELD_GET(CFG_DFR_INT_SUPP, mca_config) && !FIELD_GET(CFG_DFR_INT_TYPE, mca_config))
+		mca_config |= FIELD_PREP(CFG_DFR_INT_TYPE, INTR_TYPE_APIC);
 
-		wrmsr(smca_config, low, high);
-	}
+	if (FIELD_GET(CFG_LSB_IN_STATUS, mca_config))
+		this_cpu_ptr(mce_banks_array)[bank].lsb_in_status = true;
+
+	wrmsrl(MSR_AMD64_SMCA_MCx_CONFIG(bank), mca_config);
+}
+
+static void smca_configure_old(unsigned int bank, unsigned int cpu)
+{
+	u8 *bank_counts = this_cpu_ptr(smca_bank_counts);
+	const struct smca_hwid *s_hwid;
+	unsigned int i, hwid_mcatype;
+	u32 high, low;
 
 	smca_set_misc_banks_map(bank, cpu);
 
@@ -764,8 +777,9 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 
 	for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank) {
 		if (mce_flags.smca)
-			smca_configure(bank, cpu);
+			smca_configure_old(bank, cpu);
 
+		configure_smca(bank);
 		disable_err_thresholding(c, bank);
 
 		for (block = 0; block < NR_BLOCKS; ++block) {
-- 
2.34.1