[PATCH] drm/radeon: Prevent multiple error lines on suspend
Woody Suwalski
terraluna977 at gmail.com
Thu Nov 23 04:25:56 UTC 2023
# Fix to avoid multiple error lines printed on every suspend by Radeon
driver's debugfs.
#
# radeon_debugfs_init() calls debugfs_create_file() for every ring.
#
# This results in printing multiple error lines to the screen and dmesg
similar to this:
# debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already
present!
#
# The fix is to run lookup for the file before trying to (re)create that
debug file.
# Signed-off-by: Woody Suwalski <terraluna977 at gmail.com>
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c
b/drivers/gpu/drm/radeon/radeon_ring.c
index e6534fa9f1fb..72b1d2d31295 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -549,10 +549,15 @@ static void radeon_debugfs_ring_init(struct
radeon_device *rdev, struct radeon_r
#if defined(CONFIG_DEBUG_FS)
const char *ring_name = radeon_debugfs_ring_idx_to_name(ring->idx);
struct dentry *root = rdev->ddev->primary->debugfs_root;
-
- if (ring_name)
- debugfs_create_file(ring_name, 0444, root, ring,
- &radeon_debugfs_ring_info_fops);
+ struct dentry *lookup;
+
+ if (ring_name) {
+ if ((lookup = debugfs_lookup(ring_name, root)) == NULL)
+ debugfs_create_file(ring_name, 0444, root, ring,
+ &radeon_debugfs_ring_info_fops);
+ else
+ dput(lookup);
+ }
#endif
}
-------------- next part --------------
[ 0.000000] Linux version 6.7-pingu (kernel at pingu64builder) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #0~rc2 SMP PREEMPT_DYNAMIC Sun Nov 19 22:15:18 EST 2023
[ 0.000000] Command line: initrd=\EFI\Pingu\boot\init-6.7-pingu.img quiet net.ifnames=0 loop.max_part=7 root=/dev/sda7 resume=swap:/dev/sda6 log_buf_len=128k SHOWSPLASH=y splash systemd.show-status=0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000093aecfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000093aed000-0x00000000942edfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000942ee000-0x000000009e17efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e17f000-0x000000009f97efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f97f000-0x000000009fb7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fb7f000-0x000000009fbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x921db018-0x921e9c57] usable ==> usable
[ 0.000000] e820: update [mem 0x921db018-0x921e9c57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000085fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000921db017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000921db018-0x00000000921e9c57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000921e9c58-0x0000000093aecfff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093aed000-0x00000000942edfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000942ee000-0x000000009e17efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009e17f000-0x000000009f97efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009f97f000-0x000000009fb7efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009fb7f000-0x000000009fbfefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009fbff000-0x000000009fbfffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009fc00000-0x00000000dfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] efi: EFI v2.3.1 by INSYDE Corp.
[ 0.000000] efi: ESRT=0x9f039d18 ACPI=0x9fbfe000 ACPI 2.0=0x9fbfe014 SMBIOS=0x9f97ef98 INITRD=0x9437cf98 RNG=0x9fbe6e18 TPMEventLog=0x921ea018
[ 0.000000] random: crng init done
[ 0.000000] TPM Final Events table not present
[ 0.000000] efi: Remove mem34: MMIO range=[0xf0900000-0xf09fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xf0900000-0xf09fffff] reserved
[ 0.000000] efi: Remove mem35: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[ 0.000000] efi: Not removing mem36: MMIO range=[0xfec00000-0xfec01fff] (8KB) from e820 map
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem38: MMIO range=[0xfed80000-0xfed80fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem40: MMIO range=[0xff800000-0xffffffff] (8MB) from e820 map
[ 0.000000] e820: remove [mem 0xff800000-0xffffffff] reserved
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: HP HP Notebook/80CB, BIOS F.28 05/17/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2195.964 MHz processor
[ 0.000029] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000034] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000045] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000059] MTRR map: 8 entries (3 fixed + 5 variable; max 20), built from 9 variable MTRRs
[ 0.000063] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000856] last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
[ 0.000902] esrt: Reserving ESRT space from 0x000000009f039d18 to 0x000000009f039d50.
[ 0.000919] Using GB pages for direct mapping
[ 0.002568] Secure boot disabled
[ 0.002570] RAMDISK: [mem 0x921ee000-0x93190fff]
[ 0.002580] ACPI: Early table checksum verification disabled
[ 0.002589] ACPI: RSDP 0x000000009FBFE014 000024 (v02 HPQOEM)
[ 0.002599] ACPI: XSDT 0x000000009FBC4188 0000D4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.002610] ACPI: FACP 0x000000009FBFB000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.002622] ACPI: DSDT 0x000000009FBE8000 00E67A (v01 HPQOEM SLIC-MPC F0000000 ACPI 00040000)
[ 0.002627] ACPI: FACS 0x000000009FB04000 000040
[ 0.002632] ACPI: TCPA 0x000000009FBFD000 000032 (v02 HPQOEM 80CB 00000000 HP 00040000)
[ 0.002637] ACPI: UEFI 0x000000009FBFC000 000236 (v01 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002642] ACPI: HPET 0x000000009FBFA000 000038 (v01 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002647] ACPI: APIC 0x000000009FBF9000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.002651] ACPI: MCFG 0x000000009FBF8000 00003C (v01 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002656] ACPI: ASF! 0x000000009FBF7000 0000A5 (v32 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002661] ACPI: BOOT 0x000000009FBE7000 000028 (v01 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002666] ACPI: FPDT 0x000000009FBE5000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.002671] ACPI: MSDM 0x000000009FBE4000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.002676] ACPI: SSDT 0x000000009FBE3000 000CB4 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002681] ACPI: SSDT 0x000000009FBDE000 0048A6 (v02 HPQOEM 80CB 00000002 ACPI 00040000)
[ 0.002685] ACPI: VFCT 0x000000009FBCF000 00EC84 (v01 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002690] ACPI: SSDT 0x000000009FBCE000 00041A (v01 HPQOEM 80CB 00001000 ACPI 00040000)
[ 0.002695] ACPI: TPM2 0x000000009FBCD000 000044 (v03 HPQOEM 80CB 20505350 HP 00040000)
[ 0.002699] ACPI: SSDT 0x000000009FBCC000 000692 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002704] ACPI: SSDT 0x000000009FBCB000 000418 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002709] ACPI: SSDT 0x000000009FBC9000 0017D0 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002713] ACPI: SSDT 0x000000009FBC8000 00008C (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002718] ACPI: SSDT 0x000000009FBC6000 001153 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002723] ACPI: SSDT 0x000000009FBC3000 000F8A (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002728] ACPI: BGRT 0x000000009FBC5000 000038 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002731] ACPI: Reserving FACP table memory at [mem 0x9fbfb000-0x9fbfb10b]
[ 0.002734] ACPI: Reserving DSDT table memory at [mem 0x9fbe8000-0x9fbf6679]
[ 0.002736] ACPI: Reserving FACS table memory at [mem 0x9fb04000-0x9fb0403f]
[ 0.002737] ACPI: Reserving TCPA table memory at [mem 0x9fbfd000-0x9fbfd031]
[ 0.002739] ACPI: Reserving UEFI table memory at [mem 0x9fbfc000-0x9fbfc235]
[ 0.002740] ACPI: Reserving HPET table memory at [mem 0x9fbfa000-0x9fbfa037]
[ 0.002742] ACPI: Reserving APIC table memory at [mem 0x9fbf9000-0x9fbf908f]
[ 0.002743] ACPI: Reserving MCFG table memory at [mem 0x9fbf8000-0x9fbf803b]
[ 0.002745] ACPI: Reserving ASF! table memory at [mem 0x9fbf7000-0x9fbf70a4]
[ 0.002746] ACPI: Reserving BOOT table memory at [mem 0x9fbe7000-0x9fbe7027]
[ 0.002748] ACPI: Reserving FPDT table memory at [mem 0x9fbe5000-0x9fbe5043]
[ 0.002749] ACPI: Reserving MSDM table memory at [mem 0x9fbe4000-0x9fbe4054]
[ 0.002751] ACPI: Reserving SSDT table memory at [mem 0x9fbe3000-0x9fbe3cb3]
[ 0.002752] ACPI: Reserving SSDT table memory at [mem 0x9fbde000-0x9fbe28a5]
[ 0.002754] ACPI: Reserving VFCT table memory at [mem 0x9fbcf000-0x9fbddc83]
[ 0.002755] ACPI: Reserving SSDT table memory at [mem 0x9fbce000-0x9fbce419]
[ 0.002757] ACPI: Reserving TPM2 table memory at [mem 0x9fbcd000-0x9fbcd043]
[ 0.002758] ACPI: Reserving SSDT table memory at [mem 0x9fbcc000-0x9fbcc691]
[ 0.002760] ACPI: Reserving SSDT table memory at [mem 0x9fbcb000-0x9fbcb417]
[ 0.002761] ACPI: Reserving SSDT table memory at [mem 0x9fbc9000-0x9fbca7cf]
[ 0.002763] ACPI: Reserving SSDT table memory at [mem 0x9fbc8000-0x9fbc808b]
[ 0.002764] ACPI: Reserving SSDT table memory at [mem 0x9fbc6000-0x9fbc7152]
[ 0.002766] ACPI: Reserving SSDT table memory at [mem 0x9fbc3000-0x9fbc3f89]
[ 0.002767] ACPI: Reserving BGRT table memory at [mem 0x9fbc5000-0x9fbc5037]
[ 0.002867] No NUMA configuration found
[ 0.002869] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.002876] NODE_DATA(0) allocated [mem 0x21effc000-0x21effffff]
[ 0.002916] Zone ranges:
[ 0.002917] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002921] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.002923] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.002925] Movable zone start for each node
[ 0.002927] Early memory node ranges
[ 0.002928] node 0: [mem 0x0000000000001000-0x000000000006dfff]
[ 0.002931] node 0: [mem 0x0000000000070000-0x0000000000085fff]
[ 0.002932] node 0: [mem 0x0000000000100000-0x0000000093aecfff]
[ 0.002935] node 0: [mem 0x00000000942ee000-0x000000009e17efff]
[ 0.002936] node 0: [mem 0x000000009fbff000-0x000000009fbfffff]
[ 0.002938] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.002941] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.002951] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002954] On node 0, zone DMA: 2 pages in unavailable ranges
[ 0.003040] On node 0, zone DMA: 122 pages in unavailable ranges
[ 0.026402] On node 0, zone DMA32: 2049 pages in unavailable ranges
[ 0.026683] On node 0, zone DMA32: 6784 pages in unavailable ranges
[ 0.070191] On node 0, zone Normal: 1024 pages in unavailable ranges
[ 0.070362] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.070482] ACPI: PM-Timer IO Port: 0x408
[ 0.070498] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.070501] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.070503] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.070504] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.070517] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.070525] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[ 0.070529] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.070534] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.070540] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.070543] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.070555] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.070588] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.070592] PM: hibernation: Registered nosave memory: [mem 0x0006e000-0x0006ffff]
[ 0.070595] PM: hibernation: Registered nosave memory: [mem 0x00086000-0x000bffff]
[ 0.070596] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.070599] PM: hibernation: Registered nosave memory: [mem 0x921db000-0x921dbfff]
[ 0.070602] PM: hibernation: Registered nosave memory: [mem 0x921e9000-0x921e9fff]
[ 0.070605] PM: hibernation: Registered nosave memory: [mem 0x93aed000-0x942edfff]
[ 0.070608] PM: hibernation: Registered nosave memory: [mem 0x9e17f000-0x9f97efff]
[ 0.070610] PM: hibernation: Registered nosave memory: [mem 0x9f97f000-0x9fb7efff]
[ 0.070611] PM: hibernation: Registered nosave memory: [mem 0x9fb7f000-0x9fbfefff]
[ 0.070614] PM: hibernation: Registered nosave memory: [mem 0x9fc00000-0xdfffffff]
[ 0.070615] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xfebfffff]
[ 0.070617] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.070618] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.070619] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.070620] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.070622] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.070623] PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.070624] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.070626] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.070629] [mem 0xe0000000-0xfebfffff] available for PCI devices
[ 0.070633] Booting paravirtualized kernel on bare hardware
[ 0.070639] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.078291] setup_percpu: NR_CPUS:8 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.079329] percpu: Embedded 45 pages/cpu s144168 r8192 d31960 u524288
[ 0.079361] pcpu-alloc: s144168 r8192 d31960 u524288 alloc=1*2097152
[ 0.079368] pcpu-alloc: [0] 0 1 2 3
[ 0.079422] Kernel command line: initrd=\EFI\Pingu\boot\init-6.7-pingu.img quiet net.ifnames=0 loop.max_part=7 root=/dev/sda7 resume=swap:/dev/sda6 log_buf_len=128k SHOWSPLASH=y splash systemd.show-status=0
[ 0.079684] Unknown kernel command line parameters "splash SHOWSPLASH=y", will be passed to user space.
[ 0.084506] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.086952] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.087030] Fallback order for Node 0: 0
[ 0.087041] Built 1 zonelists, mobility grouping on. Total pages: 1792345
[ 0.087044] Policy zone: Normal
[ 0.087049] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.087054] software IO TLB: area num 4.
[ 0.239147] Memory: 6979832K/7283720K available (14336K kernel code, 1097K rwdata, 4440K rodata, 2196K init, 756K bss, 303632K reserved, 0K cma-reserved)
[ 0.239267] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.240533] Dynamic Preempt: voluntary
[ 0.240620] rcu: Preemptible hierarchical RCU implementation.
[ 0.240622] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.240626] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.240627] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.240648] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16
[ 0.240914] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.241039] Console: colour dummy device 80x25
[ 0.241045] printk: legacy console [tty0] enabled
[ 0.241111] ACPI: Core revision 20230628
[ 0.241499] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.241530] APIC: Switch to symmetric I/O mode setup
[ 0.242097] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.261526] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa74e462e5, max_idle_ns: 440795264032 ns
[ 0.261537] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.92 BogoMIPS (lpj=8783856)
[ 0.261561] BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
[ 0.261567] SVM disabled (by BIOS) in MSR_VM_CR
[ 0.261591] LVT offset 1 assigned for vector 0xf9
[ 0.261602] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.261604] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.261613] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.261618] Spectre V2 : Mitigation: Retpolines
[ 0.261620] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.261621] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.261623] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.261625] RETBleed: Mitigation: untrained return thunk
[ 0.261629] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.261633] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.261645] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.261648] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.261650] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.261653] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.261656] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.290212] Freeing SMP alternatives memory: 44K
[ 0.290231] pid_max: default: 32768 minimum: 301
[ 0.297713] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.297776] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.412999] smpboot: CPU0: AMD A8-7410 APU with AMD Radeon R5 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
[ 0.413357] Performance Events: AMD PMU driver.
[ 0.413365] ... version: 0
[ 0.413367] ... bit width: 48
[ 0.413368] ... generic registers: 4
[ 0.413370] ... value mask: 0000ffffffffffff
[ 0.413371] ... max period: 00007fffffffffff
[ 0.413373] ... fixed-purpose events: 0
[ 0.413374] ... event mask: 000000000000000f
[ 0.413531] signal: max sigframe size: 1776
[ 0.413531] rcu: Hierarchical SRCU implementation.
[ 0.413531] rcu: Max phase no-delay instances is 1000.
[ 0.413531] smp: Bringing up secondary CPUs ...
[ 0.413531] smpboot: x86: Booting SMP configuration:
[ 0.413531] .... node #0, CPUs: #1 #2 #3
[ 0.004591] __common_interrupt: 1.55 No irq handler for vector
[ 0.004591] __common_interrupt: 2.55 No irq handler for vector
[ 0.004591] __common_interrupt: 3.55 No irq handler for vector
[ 0.419533] smp: Brought up 1 node, 4 CPUs
[ 0.419533] smpboot: Max logical packages: 1
[ 0.419533] smpboot: Total of 4 processors activated (17567.71 BogoMIPS)
[ 0.421941] devtmpfs: initialized
[ 0.422005] ACPI: PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
[ 0.422005] ACPI: PM: Registering ACPI NVS region [mem 0x9f97f000-0x9fb7efff] (2097152 bytes)
[ 0.422005] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.422005] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.422005] pinctrl core: initialized pinctrl subsystem
[ 0.422071] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.422503] thermal_sys: Registered thermal governor 'fair_share'
[ 0.422506] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.422508] thermal_sys: Registered thermal governor 'step_wise'
[ 0.422510] thermal_sys: Registered thermal governor 'user_space'
[ 0.422538] cpuidle: using governor ladder
[ 0.422546] cpuidle: using governor menu
[ 0.422582] Simple Boot Flag at 0x44 set to 0x1
[ 0.422582] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.422582] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.422582] PCI: not using MMCONFIG
[ 0.422582] PCI: Using configuration type 1 for base access
[ 0.422582] PCI: Using configuration type 1 for extended access
[ 0.487230] raid6: sse2x4 gen() 5764 MB/s
[ 0.555229] raid6: sse2x2 gen() 5655 MB/s
[ 0.623227] raid6: sse2x1 gen() 4687 MB/s
[ 0.623230] raid6: using algorithm sse2x4 gen() 5764 MB/s
[ 0.691230] raid6: .... xor() 2212 MB/s, rmw enabled
[ 0.691234] raid6: using ssse3x2 recovery algorithm
[ 0.691322] ACPI: Added _OSI(Module Device)
[ 0.691325] ACPI: Added _OSI(Processor Device)
[ 0.691327] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.691329] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.708628] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.711237] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.717610] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.717978] ACPI: EC: EC started
[ 0.717980] ACPI: EC: interrupt blocked
[ 0.718279] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.718284] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[ 0.718288] ACPI: Interpreter enabled
[ 0.718326] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.718328] ACPI: Using IOAPIC for interrupt routing
[ 0.719542] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.721947] [Firmware Info]: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] not reserved in ACPI motherboard resources
[ 0.721952] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as EfiMemoryMappedIO
[ 0.721969] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.721972] PCI: Using E820 reservations for host bridge windows
[ 0.722254] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.814920] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.814938] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.814949] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.814953] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.814956] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
[ 0.814971] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.815330] PCI host bridge to bus 0000:00
[ 0.815334] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.815337] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.815341] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.815345] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff window]
[ 0.815348] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
[ 0.815351] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[ 0.815354] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[ 0.815357] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
[ 0.815360] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.815382] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[ 0.815486] pci 0000:00:01.0: [1002:9851] type 00 class 0x030000
[ 0.815500] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.815510] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.815518] pci 0000:00:01.0: reg 0x20: [io 0x4000-0x40ff]
[ 0.815525] pci 0000:00:01.0: reg 0x24: [mem 0xf0d00000-0xf0d3ffff]
[ 0.815532] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.815539] pci 0000:00:01.0: enabling Extended Tags
[ 0.815552] pci 0000:00:01.0: BAR 0: assigned to efifb
[ 0.815557] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.815590] pci 0000:00:01.0: supports D1 D2
[ 0.815593] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.815726] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.815740] pci 0000:00:01.1: reg 0x10: [mem 0xf0d60000-0xf0d63fff 64bit]
[ 0.815766] pci 0000:00:01.1: enabling Extended Tags
[ 0.815798] pci 0000:00:01.1: supports D1 D2
[ 0.815868] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[ 0.815947] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
[ 0.815980] pci 0000:00:02.1: enabling Extended Tags
[ 0.816021] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.816139] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[ 0.816172] pci 0000:00:02.4: enabling Extended Tags
[ 0.816225] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.816348] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
[ 0.816381] pci 0000:00:02.5: enabling Extended Tags
[ 0.816420] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[ 0.816538] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[ 0.816549] pci 0000:00:08.0: reg 0x10: [mem 0xf0d40000-0xf0d5ffff 64bit pref]
[ 0.816556] pci 0000:00:08.0: reg 0x18: [mem 0xf0a00000-0xf0afffff]
[ 0.816562] pci 0000:00:08.0: reg 0x1c: [mem 0xf0d70000-0xf0d70fff]
[ 0.816571] pci 0000:00:08.0: reg 0x24: [mem 0xf0d6a000-0xf0d6bfff]
[ 0.816664] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.816685] pci 0000:00:10.0: reg 0x10: [mem 0xf0d68000-0xf0d69fff 64bit]
[ 0.816778] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.816903] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[ 0.816918] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
[ 0.816926] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
[ 0.816934] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
[ 0.816943] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
[ 0.816951] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
[ 0.816959] pci 0000:00:11.0: reg 0x24: [mem 0xf0d6f000-0xf0d6f3ff]
[ 0.816999] pci 0000:00:11.0: PME# supported from D3hot
[ 0.817393] pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
[ 0.817408] pci 0000:00:12.0: reg 0x10: [mem 0xf0d6e000-0xf0d6e0ff]
[ 0.817471] pci 0000:00:12.0: supports D1 D2
[ 0.817473] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.817589] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[ 0.817603] pci 0000:00:13.0: reg 0x10: [mem 0xf0d6d000-0xf0d6d0ff]
[ 0.817666] pci 0000:00:13.0: supports D1 D2
[ 0.817668] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.817771] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.817914] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.817931] pci 0000:00:14.2: reg 0x10: [mem 0xf0d64000-0xf0d67fff 64bit]
[ 0.817989] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.818103] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.818271] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[ 0.818289] pci 0000:00:14.7: reg 0x10: [mem 0xf0d6c000-0xf0d6c0ff 64bit]
[ 0.818342] pci 0000:00:14.7: PME# supported from D3cold
[ 0.818403] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[ 0.818470] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[ 0.818533] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[ 0.818598] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[ 0.818668] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[ 0.818730] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[ 0.818858] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.818945] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000
[ 0.818967] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.818996] pci 0000:02:00.0: reg 0x18: [mem 0xf0c00000-0xf0c03fff 64bit]
[ 0.819117] pci 0000:02:00.0: supports D1 D2
[ 0.819119] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819317] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.819323] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 0.819327] pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 0.819415] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.819439] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.819467] pci 0000:03:00.0: reg 0x18: [mem 0xf0b00000-0xf0b00fff 64bit]
[ 0.819487] pci 0000:03:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
[ 0.819602] pci 0000:03:00.0: supports D1 D2
[ 0.819604] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819813] pci 0000:00:02.5: PCI bridge to [bus 03]
[ 0.819820] pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
[ 0.819824] pci 0000:00:02.5: bridge window [mem 0xf0b00000-0xf0bfffff]
[ 0.819829] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.902666] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.902757] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.902855] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.902950] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.903030] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.903094] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.903156] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.903219] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.903485] platform MSFT0101:00: failed to claim resource 0: [mem 0x9fb6e000-0x9fc6dfff]
[ 0.903495] acpi MSFT0101:00: platform device creation failed: -16
[ 0.903771] ACPI: EC: interrupt unblocked
[ 0.903773] ACPI: EC: event unblocked
[ 0.903776] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.903778] ACPI: EC: GPE=0x3
[ 0.903781] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
[ 0.903784] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
[ 0.903856] iommu: Default domain type: Translated
[ 0.903859] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.903958] SCSI subsystem initialized
[ 0.903977] libata version 3.00 loaded.
[ 0.903977] efivars: Registered efivars operations
[ 0.903977] PCI: Using ACPI for IRQ routing
[ 0.903977] PCI: pci_cache_line_size set to 64 bytes
[ 0.903977] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x921db018-0x93ffffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x93aed000-0x93ffffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x9e17f000-0x9fffffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.905562] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.905562] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.905562] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.905565] vgaarb: loaded
[ 0.906200] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[ 0.906336] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.906344] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.909535] clocksource: Switched to clocksource tsc-early
[ 0.909535] pnp: PnP ACPI init
[ 0.909535] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[ 0.909535] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.909535] system 00:04: [io 0x0400-0x04cf] has been reserved
[ 0.909535] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.909535] system 00:04: [io 0x04d6] has been reserved
[ 0.909535] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.909535] system 00:04: [io 0x077a] has been reserved
[ 0.909535] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.909535] system 00:04: [io 0x0c14] has been reserved
[ 0.909535] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.909535] system 00:04: [io 0x0c6c] has been reserved
[ 0.909535] system 00:04: [io 0x0c6f] has been reserved
[ 0.909535] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.909535] system 00:04: [io 0x0840-0x0847] has been reserved
[ 0.909535] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.909535] system 00:05: [mem 0xff800000-0xffffffff] has been reserved
[ 0.997053] pnp: PnP ACPI: found 6 devices
[ 1.004358] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.004464] NET: Registered PF_INET protocol family
[ 1.004710] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 1.007436] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 1.007456] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.007463] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 1.007619] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 1.008362] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.008519] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 1.008593] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 1.008706] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.008729] pci 0000:00:02.1: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 1.008738] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 1.008743] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 1.008766] pci 0000:00:02.1: BAR 8: assigned [mem 0xf0e00000-0xf0ffffff]
[ 1.008773] pci 0000:00:02.1: BAR 9: assigned [mem 0xf1000000-0xf11fffff 64bit pref]
[ 1.008778] pci 0000:00:02.1: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.008784] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 1.008790] pci 0000:00:02.1: bridge window [io 0x1000-0x1fff]
[ 1.008796] pci 0000:00:02.1: bridge window [mem 0xf0e00000-0xf0ffffff]
[ 1.008800] pci 0000:00:02.1: bridge window [mem 0xf1000000-0xf11fffff 64bit pref]
[ 1.008805] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 1.008809] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 1.008813] pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 1.008820] pci 0000:00:02.5: PCI bridge to [bus 03]
[ 1.008823] pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
[ 1.008828] pci 0000:00:02.5: bridge window [mem 0xf0b00000-0xf0bfffff]
[ 1.008832] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 1.008841] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.008844] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.008847] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.008850] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff window]
[ 1.008853] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window]
[ 1.008856] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xf7ffffff window]
[ 1.008859] pci_bus 0000:00: resource 10 [mem 0xfc000000-0xfed3ffff window]
[ 1.008862] pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
[ 1.008865] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.008867] pci_bus 0000:01: resource 1 [mem 0xf0e00000-0xf0ffffff]
[ 1.008870] pci_bus 0000:01: resource 2 [mem 0xf1000000-0xf11fffff 64bit pref]
[ 1.008873] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 1.008876] pci_bus 0000:02: resource 1 [mem 0xf0c00000-0xf0cfffff]
[ 1.008879] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.008881] pci_bus 0000:03: resource 1 [mem 0xf0b00000-0xf0bfffff]
[ 1.008884] pci_bus 0000:03: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[ 1.009023] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 1.019411] pci 0000:00:12.0: PME# does not work under D3, disabling it
[ 1.019581] pci 0000:00:13.0: PME# does not work under D3, disabling it
[ 1.019626] PCI: CLS 64 bytes, default 64
[ 1.019641] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.019643] software IO TLB: mapped [mem 0x0000000094d16000-0x0000000098d16000] (64MB)
[ 1.019736] Trying to unpack rootfs image as initramfs...
[ 1.019779] LVT offset 0 assigned for vector 0x400
[ 1.019883] perf: AMD IBS detected (0x000000ff)
[ 1.020502] Initialise system trusted keyrings
[ 1.020688] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.020704] zbud: loaded
[ 1.020999] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.045122] xor: automatically using best checksumming function avx
[ 1.045129] async_tx: api initialized (async)
[ 1.045133] Key type asymmetric registered
[ 1.045134] Asymmetric key parser 'x509' registered
[ 1.045136] Asymmetric key parser 'pkcs8' registered
[ 1.045177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.046680] ACPI: AC: AC Adapter [ACAD] (on-line)
[ 1.046774] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.046817] ACPI: button: Power Button [PWRB]
[ 1.046886] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.046931] ACPI: button: Lid Switch [LID]
[ 1.046989] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.047411] ACPI: button: Power Button [PWRF]
[ 1.047499] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.047684] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.047756] ACPI: \_PR_.C000: Found 2 idle states
[ 1.048109] ACPI: \_PR_.C001: Found 2 idle states
[ 1.048232] ACPI: \_PR_.C002: Found 2 idle states
[ 1.048353] ACPI: \_PR_.C003: Found 2 idle states
[ 1.068355] Linux agpgart interface v0.103
[ 1.068875] ACPI: bus type drm_connector registered
[ 1.073509] brd: module loaded
[ 1.075885] loop: module loaded
[ 1.076349] ahci 0000:00:11.0: version 3.0
[ 1.076674] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.076681] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 1.078040] scsi host0: ahci
[ 1.078279] scsi host1: ahci
[ 1.078368] ata1: SATA max UDMA/133 abar m1024 at 0xf0d6f000 port 0xf0d6f100 irq 29 lpm-pol 0
[ 1.078375] ata2: SATA max UDMA/133 abar m1024 at 0xf0d6f000 port 0xf0d6f180 irq 29 lpm-pol 0
[ 1.078828] tun: Universal TUN/TAP device driver, 1.6
[ 1.079045] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.094818] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.094841] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.095204] mousedev: PS/2 mouse device common for all mice
[ 1.095510] rtc_cmos 00:01: RTC can wake from S4
[ 1.095856] rtc_cmos 00:01: registered as rtc0
[ 1.095880] rtc_cmos 00:01: setting system clock to 2023-11-22T21:20:08 UTC (1700688008)
[ 1.095929] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.096046] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[ 1.096119] hid: raw HID events driver (C) Jiri Kosina
[ 1.096344] NET: Registered PF_PACKET protocol family
[ 1.096397] Key type dns_resolver registered
[ 1.096434] x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
[ 1.096905] microcode: CPU0: patch_level=0x07030106
[ 1.096926] microcode: CPU1: patch_level=0x07030106
[ 1.096945] microcode: CPU2: patch_level=0x07030106
[ 1.096961] microcode: CPU3: patch_level=0x07030106
[ 1.096970] microcode: Microcode Update Driver: v2.2.
[ 1.096990] IPI shorthand broadcast: enabled
[ 1.102346] sched_clock: Marking stable (1099483932, 591913)->(1111648476, -11572631)
[ 1.102626] registered taskstats version 1
[ 1.102630] Loading compiled-in X.509 certificates
[ 1.106075] Key type .fscrypt registered
[ 1.106086] Key type fscrypt-provisioning registered
[ 1.106762] Btrfs loaded, zoned=no, fsverity=no
[ 1.108876] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.548647] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.548687] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.549873] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX1P2C, max UDMA/100
[ 1.551329] ata2.00: ATAPI: hp DVDRW GUB0N, UB00, max UDMA/133
[ 1.551401] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.553434] ata2.00: configured for UDMA/133
[ 1.553889] ata1.00: configured for UDMA/100
[ 1.616803] ACPI: battery: Slot [BAT1] (battery present)
[ 1.619446] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 2C PQ: 0 ANSI: 5
[ 1.620018] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.620025] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.620044] sd 0:0:0:0: [sda] Write Protect is off
[ 1.620049] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.620077] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.620116] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 1.625842] scsi 1:0:0:0: CD-ROM hp DVDRW GUB0N UB00 PQ: 0 ANSI: 5
[ 1.745613] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 1.746104] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.830453] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 1.859582] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 1.859603] psmouse serio1: synaptics: Your touchpad (PNP: SYN1efc PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input at vger.kernel.org.
[ 1.916670] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[ 1.953103] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.032628] tsc: Refined TSC clocksource calibration: 2195.881 MHz
[ 2.032651] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa6ffc1640, max_idle_ns: 440795239502 ns
[ 2.032687] clocksource: Switched to clocksource tsc
[ 2.702603] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 2.731732] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 2.731753] psmouse serio1: synaptics: Your touchpad (PNP: SYN1efc PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input at vger.kernel.org.
[ 2.788800] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[ 2.825216] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 3.768877] Freeing initrd memory: 16012K
[ 3.780363] Key type encrypted registered
[ 3.780581] clk: Disabling unused clocks
[ 3.781633] Freeing unused kernel image (initmem) memory: 2196K
[ 3.822433] Write protecting the kernel read-only data: 20480k
[ 3.823674] Freeing unused kernel image (rodata/data gap) memory: 1704K
[ 3.823698] Run /init as init process
[ 3.823701] with arguments:
[ 3.823703] /init
[ 3.823705] splash
[ 3.823706] with environment:
[ 3.823708] HOME=/
[ 3.823709] TERM=linux
[ 3.823710] SHOWSPLASH=y
[ 3.824932] pingu: init start
[ 3.922198] pingu: detection done
[ 3.946001] PM: Image not found (code -22)
[ 4.018833] EXT4-fs (sda7): mounted filesystem 6056d8b6-b5a3-4fb7-80d5-b99b091b11ac r/w with ordered data mode. Quota mode: disabled.
[ 4.019069] pingu: user mounted
[ 7.913265] systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
[ 8.290877] systemd[1]: Inserted module 'autofs4'
[ 8.636705] systemd[1]: systemd 252.17-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 8.636720] systemd[1]: Detected architecture x86-64.
[ 8.680023] systemd[1]: Hostname set to <HPNotebook>.
[ 10.141781] systemd[1]: Queued start job for default target graphical.target.
[ 10.158485] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 10.159076] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 10.159478] systemd[1]: Created slice user.slice - User and Session Slice.
[ 10.159603] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 10.159693] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 10.159980] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 10.160061] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 10.160107] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 10.160164] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 10.160193] systemd[1]: Reached target slices.target - Slice Units.
[ 10.160252] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 10.160389] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 10.177632] systemd[1]: systemd-journald-audit.socket - Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
[ 10.178067] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 10.178291] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 10.197155] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 10.197446] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 10.197725] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 10.217048] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 10.218748] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 10.218961] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
[ 10.220915] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 10.222903] systemd[1]: Starting modprobe at configfs.service - Load Kernel Module configfs...
[ 10.225114] systemd[1]: Starting modprobe at dm_mod.service - Load Kernel Module dm_mod...
[ 10.227498] systemd[1]: Starting modprobe at drm.service - Load Kernel Module drm...
[ 10.229829] systemd[1]: Starting modprobe at efi_pstore.service - Load Kernel Module efi_pstore...
[ 10.232122] systemd[1]: Starting modprobe at fuse.service - Load Kernel Module fuse...
[ 10.234508] systemd[1]: Starting modprobe at loop.service - Load Kernel Module loop...
[ 10.235108] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 10.235117] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 10.237072] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 10.258281] pstore: Using crash dump compression: deflate
[ 10.284942] pstore: Registered efi_pstore as persistent store backend
[ 10.305789] fuse: init (API version 7.39)
[ 10.333568] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel at redhat.com
[ 10.497159] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 10.499214] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 10.501262] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 10.504382] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 10.504584] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 10.504992] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 10.509282] systemd[1]: modprobe at configfs.service: Deactivated successfully.
[ 10.509566] systemd[1]: Finished modprobe at configfs.service - Load Kernel Module configfs.
[ 10.510026] systemd[1]: modprobe at dm_mod.service: Deactivated successfully.
[ 10.510256] systemd[1]: Finished modprobe at dm_mod.service - Load Kernel Module dm_mod.
[ 10.510674] systemd[1]: modprobe at drm.service: Deactivated successfully.
[ 10.510901] systemd[1]: Finished modprobe at drm.service - Load Kernel Module drm.
[ 10.511317] systemd[1]: modprobe at efi_pstore.service: Deactivated successfully.
[ 10.511548] systemd[1]: Finished modprobe at efi_pstore.service - Load Kernel Module efi_pstore.
[ 10.511955] systemd[1]: modprobe at fuse.service: Deactivated successfully.
[ 10.512177] systemd[1]: Finished modprobe at fuse.service - Load Kernel Module fuse.
[ 10.512578] systemd[1]: modprobe at loop.service: Deactivated successfully.
[ 10.512816] systemd[1]: Finished modprobe at loop.service - Load Kernel Module loop.
[ 10.514791] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 10.516361] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 10.516567] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 10.518527] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 10.519754] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 10.560836] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 10.561037] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 10.561122] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 10.581117] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 10.582977] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 10.583779] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 10.586116] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 10.659018] systemd[1]: Started systemd-journald.service - Journal Service.
[ 10.860688] systemd-journald[1224]: Received client request to flush runtime journal.
[ 12.050610] acpi_cpufreq: overriding BIOS provided _PSD data
[ 12.114058] input: Wireless hotkeys as /devices/virtual/input/input9
[ 12.148629] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20230628/utaddress-204)
[ 12.148648] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 12.204440] thermal LNXTHERM:00: registered as thermal_zone0
[ 12.204450] ACPI: thermal: Thermal Zone [TSZ0] (42 C)
[ 12.204709] thermal LNXTHERM:01: registered as thermal_zone1
[ 12.204713] ACPI: thermal: Thermal Zone [TSZ2] (20 C)
[ 12.312680] ACPI: bus type USB registered
[ 12.312784] usbcore: registered new interface driver usbfs
[ 12.312810] usbcore: registered new interface driver hub
[ 12.312842] usbcore: registered new device driver usb
[ 12.360921] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.360994] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 12.402231] [drm] radeon kernel modesetting enabled.
[ 12.402373] radeon 0000:00:01.0: vgaarb: deactivate vga console
[ 12.402756] [drm] initializing kernel modesetting (MULLINS 0x1002:0x9851 0x103C:0x80CB 0x45).
[ 12.402786] [drm] doorbell mmio base: 0xF0000000
[ 12.402788] [drm] doorbell mmio size: 8388608
[ 12.402825] ATOM BIOS: AMD
[ 12.402924] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 12.402929] radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[ 12.402936] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 12.402938] [drm] RAM width 128bits DDR
[ 12.403049] [drm] radeon: 1024M of VRAM memory ready
[ 12.403053] [drm] radeon: 2048M of GTT memory ready.
[ 12.403072] [drm] Loading mullins Microcode
[ 12.403076] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_pfp.bin
[ 12.490173] cryptd: max_cpu_qlen set to 1000
[ 12.578805] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 12.589490] r8169 0000:03:00.0 eth0: RTL8106e, 94:57:a5:ab:ef:b0, XID 449, IRQ 32
[ 12.647846] ehci-pci 0000:00:12.0: EHCI Host Controller
[ 12.647871] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 12.647884] ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 12.647894] ehci-pci 0000:00:12.0: debug port 2
[ 12.647966] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0d6e000
[ 12.660779] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 12.660935] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 12.660943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.660948] usb usb1: Product: EHCI Host Controller
[ 12.660952] usb usb1: Manufacturer: Linux 6.7-pingu ehci_hcd
[ 12.660955] usb usb1: SerialNumber: 0000:00:12.0
[ 12.661376] hub 1-0:1.0: USB hub found
[ 12.661395] hub 1-0:1.0: 2 ports detected
[ 12.661723] ehci-pci 0000:00:13.0: EHCI Host Controller
[ 12.661738] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 12.661749] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 12.661762] ehci-pci 0000:00:13.0: debug port 2
[ 12.661822] ehci-pci 0000:00:13.0: irq 18, io mem 0xf0d6d000
[ 12.676785] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[ 12.676973] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 12.676983] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.676989] usb usb2: Product: EHCI Host Controller
[ 12.676993] usb usb2: Manufacturer: Linux 6.7-pingu ehci_hcd
[ 12.676997] usb usb2: SerialNumber: 0000:00:13.0
[ 12.677456] hub 2-0:1.0: USB hub found
[ 12.677483] hub 2-0:1.0: 2 ports detected
[ 12.678317] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 12.678338] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 12.678520] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[ 12.679079] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 12.679094] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 12.679103] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 12.682030] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 12.682040] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.682045] usb usb3: Product: xHCI Host Controller
[ 12.682049] usb usb3: Manufacturer: Linux 6.7-pingu xhci-hcd
[ 12.682053] usb usb3: SerialNumber: 0000:00:10.0
[ 12.682437] hub 3-0:1.0: USB hub found
[ 12.682551] hub 3-0:1.0: 2 ports detected
[ 12.682823] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 12.682903] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 12.682910] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.682915] usb usb4: Product: xHCI Host Controller
[ 12.682919] usb usb4: Manufacturer: Linux 6.7-pingu xhci-hcd
[ 12.682922] usb usb4: SerialNumber: 0000:00:10.0
[ 12.683197] hub 4-0:1.0: USB hub found
[ 12.683215] hub 4-0:1.0: 2 ports detected
[ 12.700361] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 12.700376] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 12.766453] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 12.885211] sdhci: Secure Digital Host Controller Interface driver
[ 12.885222] sdhci: Copyright(c) Pierre Ossman
[ 12.916789] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 12.955313] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 12.958746] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.959303] AVX version of gcm_enc/dec engaged.
[ 12.959372] AES CTR mode by8 optimization enabled
[ 12.970027] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.970077] platform regulatory.0: Requesting firmware: regulatory.db
[ 13.026382] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_me.bin
[ 13.029444] platform regulatory.0: Requesting firmware: regulatory.db.p7s
[ 13.077197] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[ 13.077211] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 13.077784] hub 1-1:1.0: USB hub found
[ 13.077961] hub 1-1:1.0: 4 ports detected
[ 13.081463] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_ce.bin
[ 13.082246] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_mec.bin
[ 13.083181] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_rlc.bin
[ 13.083904] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_sdma.bin
[ 13.084458] [drm] Internal thermal controller without fan control
[ 13.085477] [drm] radeon: dpm initialized
[ 13.085487] radeon 0000:00:01.0: Requesting firmware: radeon/bonaire_uvd.bin
[ 13.100745] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[ 13.100807] radeon 0000:00:01.0: Requesting firmware: radeon/BONAIRE_vce.bin
[ 13.113176] usb 2-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[ 13.113191] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 13.113634] hub 2-1:1.0: USB hub found
[ 13.113787] hub 2-1:1.0: 4 ports detected
[ 13.116536] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 13.116576] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 13.156764] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 13.156949] radeon 0000:00:01.0: WB enabled
[ 13.156970] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[ 13.156976] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04
[ 13.156980] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08
[ 13.156984] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[ 13.156987] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10
[ 13.157581] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
[ 13.157811] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18
[ 13.157816] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c
[ 13.158081] radeon 0000:00:01.0: radeon: using MSI.
[ 13.158116] [drm] radeon: irq initialized.
[ 13.160713] [drm] ring test on 0 succeeded in 3 usecs
[ 13.160786] [drm] ring test on 1 succeeded in 2 usecs
[ 13.160802] [drm] ring test on 2 succeeded in 2 usecs
[ 13.160988] [drm] ring test on 3 succeeded in 4 usecs
[ 13.160996] [drm] ring test on 4 succeeded in 3 usecs
[ 13.179940] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 13.186863] [drm] ring test on 5 succeeded in 1 usecs
[ 13.186904] [drm] UVD initialized successfully.
[ 13.192170] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
[ 13.192869] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[ 13.197491] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[ 13.296165] [drm] ring test on 6 succeeded in 12 usecs
[ 13.296182] [drm] ring test on 7 succeeded in 2 usecs
[ 13.296184] [drm] VCE initialized successfully.
[ 13.296924] snd_hda_intel 0000:00:01.1: bound 0000:00:01.0 (ops radeon_audio_component_bind_ops [radeon])
[ 13.297301] [drm] ib test on ring 0 succeeded in 0 usecs
[ 13.297442] [drm] ib test on ring 1 succeeded in 0 usecs
[ 13.297582] [drm] ib test on ring 2 succeeded in 0 usecs
[ 13.297721] [drm] ib test on ring 3 succeeded in 0 usecs
[ 13.297858] [drm] ib test on ring 4 succeeded in 0 usecs
[ 13.376742] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 13.400742] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 13.485225] input: HP WMI hotkeys as /devices/virtual/input/input10
[ 13.491265] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=b006, bcdDevice= 2.00
[ 13.491279] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 13.491282] usb 1-1.4: Product: Bluetooth Radio
[ 13.491285] usb 1-1.4: Manufacturer: Realtek
[ 13.491287] usb 1-1.4: SerialNumber: 00e04c000001
[ 13.551486] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 13.551501] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.551505] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 13.551509] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 13.551511] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 13.551514] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 13.551517] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 13.560177] usb 2-1.1: New USB device found, idVendor=05c8, idProduct=0382, bcdDevice= 1.03
[ 13.560199] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 13.560206] usb 2-1.1: Product: HP Truevision HD
[ 13.560212] usb 2-1.1: Manufacturer: Sonix Technology Co., Ltd.
[ 13.645736] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 13.645856] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 13.645959] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 13.694651] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[ 13.694866] rtl8723be 0000:02:00.0: Requesting firmware: rtlwifi/rtl8723befw_36.bin
[ 13.700752] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 13.701224] rtlwifi: rtlwifi: wireless switch is on
[ 13.808850] [drm] ib test on ring 5 succeeded
[ 13.809441] [drm] ib test on ring 6 succeeded
[ 13.809897] [drm] ib test on ring 7 succeeded
[ 13.811901] [drm] radeon atom DIG backlight initialized
[ 13.811906] [drm] Radeon Display Connectors
[ 13.811908] [drm] Connector 0:
[ 13.811910] [drm] eDP-1
[ 13.811912] [drm] HPD1
[ 13.811913] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 13.811918] [drm] Encoders:
[ 13.811920] [drm] LCD1: INTERNAL_UNIPHY
[ 13.811922] [drm] Connector 1:
[ 13.811924] [drm] HDMI-A-1
[ 13.811925] [drm] HPD2
[ 13.811927] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 13.811931] [drm] Encoders:
[ 13.811932] [drm] DFP1: INTERNAL_UNIPHY
[ 13.811934] [drm] Connector 2:
[ 13.811936] [drm] VGA-1
[ 13.811938] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 13.811941] [drm] Encoders:
[ 13.811943] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 13.826090] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 13.836588] mc: Linux media interface: v0.10
[ 13.898419] Bluetooth: Core ver 2.22
[ 13.898464] NET: Registered PF_BLUETOOTH protocol family
[ 13.898467] Bluetooth: HCI device and connection manager initialized
[ 13.898475] Bluetooth: HCI socket layer initialized
[ 13.898478] Bluetooth: L2CAP socket layer initialized
[ 13.898486] Bluetooth: SCO socket layer initialized
[ 13.924146] videodev: Linux video capture interface: v2.00
[ 14.190283] [drm] fb mappable at 0xE0731000
[ 14.190295] [drm] vram apper at 0xE0000000
[ 14.190297] [drm] size 4325376
[ 14.190300] [drm] fb depth is 24
[ 14.190302] [drm] pitch is 5632
[ 14.190519] fbcon: radeondrmfb (fb0) is primary device
[ 14.190523] fbcon: Deferring console take-over
[ 14.190527] radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
[ 14.210966] usbcore: registered new interface driver btusb
[ 14.213215] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 14.214171] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 14.214177] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[ 14.214181] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 14.334000] usb 2-1.1: Found UVC 1.00 device HP Truevision HD (05c8:0382)
[ 14.368036] usbcore: registered new interface driver uvcvideo
[ 14.398105] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[ 14.398127] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 14.437998] Bluetooth: hci0: RTL: cfg_sz 44, total sz 22540
[ 15.263063] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[ 15.427051] [drm] amdgpu kernel modesetting enabled.
[ 16.428875] Adding 8388604k swap on /dev/sda6. Priority:-2 extents:1 across:8388604k
[ 23.905710] r8169 0000:03:00.0: Requesting firmware: rtl_nic/rtl8106e-1.fw
[ 23.922497] RTL8208 Fast Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 24.122741] fbcon: Taking over console
[ 24.124304] Console: switching to colour frame buffer device 170x48
[ 24.193968] r8169 0000:03:00.0 eth0: Link is Down
[ 27.614014] wlan0: 80 MHz not supported, disabling VHT
[ 27.624144] wlan0: authenticate with 6c:19:8f:cc:87:1c (local address=70:77:81:bf:d8:67)
[ 27.624155] wlan0: send auth to 6c:19:8f:cc:87:1c (try 1/3)
[ 27.627920] wlan0: authenticated
[ 27.628648] wlan0: associate with 6c:19:8f:cc:87:1c (try 1/3)
[ 27.632569] wlan0: RX AssocResp from 6c:19:8f:cc:87:1c (capab=0x431 status=0 aid=8)
[ 27.632882] wlan0: associated
[ 48.305211] warning: `eeeweather' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 221.734499] wlan0: deauthenticating from 6c:19:8f:cc:87:1c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 223.586338] PM: suspend entry (deep)
[ 223.664490] Filesystems sync: 0.078 seconds
[ 223.843987] (NULL device *): Requesting firmware: radeon/mullins_pfp.bin
[ 223.844049] (NULL device *): Requesting firmware: radeon/mullins_me.bin
[ 223.844169] (NULL device *): Requesting firmware: radeon/mullins_ce.bin
[ 223.844194] (NULL device *): Requesting firmware: radeon/mullins_mec.bin
[ 223.844307] (NULL device *): Requesting firmware: radeon/mullins_rlc.bin
[ 223.844449] (NULL device *): Requesting firmware: radeon/mullins_sdma.bin
[ 223.844467] (NULL device *): Requesting firmware: radeon/bonaire_uvd.bin
[ 223.844523] (NULL device *): Requesting firmware: radeon/BONAIRE_vce.bin
[ 223.844994] (NULL device *): Requesting firmware: rtlwifi/rtl8723befw_36.bin
[ 223.845518] (NULL device *): Requesting firmware: rtl_nic/rtl8106e-1.fw
[ 223.845558] (NULL device *): Requesting firmware: regulatory.db
[ 223.845652] (NULL device *): Requesting firmware: regulatory.db.p7s
[ 223.845671] (NULL device *): Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 223.845698] (NULL device *): Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 223.847974] Freezing user space processes
[ 223.849608] Freezing user space processes completed (elapsed 0.001 seconds)
[ 223.849628] OOM killer disabled.
[ 223.849630] Freezing remaining freezable tasks
[ 223.850937] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 223.850978] printk: Suspending console(s) (use no_console_suspend to debug)
[ 223.868760] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 223.899112] ata1.00: Entering standby power mode
[ 224.370794] ACPI: EC: interrupt blocked
[ 224.396017] ACPI: PM: Preparing to enter system sleep state S3
[ 224.396492] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.396768] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.397029] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.397291] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.397558] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.397825] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.398838] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.399109] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.399376] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.399643] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.399909] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.400176] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.400762] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.401032] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.401299] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.401566] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.401832] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.402099] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.402392] ACPI: EC: event blocked
[ 224.402395] ACPI: EC: EC stopped
[ 224.402397] ACPI: PM: Saving platform NVS memory
[ 224.402455] Disabling non-boot CPUs ...
[ 224.403874] smpboot: CPU 1 is now offline
[ 224.405889] smpboot: CPU 2 is now offline
[ 224.407992] smpboot: CPU 3 is now offline
[ 224.408859] ACPI: PM: Low-level resume complete
[ 224.408884] ACPI: EC: EC started
[ 224.408885] ACPI: PM: Restoring platform NVS memory
[ 224.408912] LVT offset 0 assigned for vector 0x400
[ 224.409327] Enabling non-boot CPUs ...
[ 224.409380] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 224.411790] ACPI: \_PR_.C001: Found 2 idle states
[ 224.411899] microcode: CPU1: patch_level=0x07030106
[ 224.412067] CPU1 is up
[ 224.412101] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 224.414574] ACPI: \_PR_.C002: Found 2 idle states
[ 224.414681] microcode: CPU2: patch_level=0x07030106
[ 224.414832] CPU2 is up
[ 224.414864] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 224.417354] ACPI: \_PR_.C003: Found 2 idle states
[ 224.417467] microcode: CPU3: patch_level=0x07030106
[ 224.417624] CPU3 is up
[ 224.418163] ACPI: PM: Waking up from system sleep state S3
[ 224.418989] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.419254] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.419513] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.419772] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.420031] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.420290] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.420946] ACPI: EC: interrupt unblocked
[ 224.422051] ACPI: EC: event unblocked
[ 224.423366] rtlwifi: rtlwifi: wireless switch is on
[ 224.445550] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 224.445694] radeon 0000:00:01.0: WB enabled
[ 224.445712] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[ 224.445716] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04
[ 224.445719] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08
[ 224.445722] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[ 224.445724] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10
[ 224.446212] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
[ 224.446393] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18
[ 224.446395] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c
[ 224.446803] debugfs: File 'radeon_ring_gfx' in directory '0000:00:01.0' already present!
[ 224.446808] debugfs: File 'radeon_ring_cp1' in directory '0000:00:01.0' already present!
[ 224.446811] debugfs: File 'radeon_ring_cp2' in directory '0000:00:01.0' already present!
[ 224.446814] debugfs: File 'radeon_ring_dma1' in directory '0000:00:01.0' already present!
[ 224.446817] debugfs: File 'radeon_ring_dma2' in directory '0000:00:01.0' already present!
[ 224.448580] [drm] ring test on 0 succeeded in 3 usecs
[ 224.448646] [drm] ring test on 1 succeeded in 2 usecs
[ 224.448658] [drm] ring test on 2 succeeded in 2 usecs
[ 224.448845] [drm] ring test on 3 succeeded in 4 usecs
[ 224.448851] [drm] ring test on 4 succeeded in 3 usecs
[ 224.448854] debugfs: File 'radeon_ring_uvd' in directory '0000:00:01.0' already present!
[ 224.474684] [drm] ring test on 5 succeeded in 1 usecs
[ 224.474698] [drm] UVD initialized successfully.
[ 224.474701] debugfs: File 'radeon_ring_vce1' in directory '0000:00:01.0' already present!
[ 224.474704] debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already present!
[ 224.583865] [drm] ring test on 6 succeeded in 7 usecs
[ 224.583876] [drm] ring test on 7 succeeded in 2 usecs
[ 224.583877] [drm] VCE initialized successfully.
[ 224.584032] [drm] ib test on ring 0 succeeded in 0 usecs
[ 224.584173] [drm] ib test on ring 1 succeeded in 0 usecs
[ 224.584311] [drm] ib test on ring 2 succeeded in 0 usecs
[ 224.584451] [drm] ib test on ring 3 succeeded in 0 usecs
[ 224.584589] [drm] ib test on ring 4 succeeded in 0 usecs
[ 224.713274] usb 2-1.1: reset high-speed USB device number 3 using ehci-pci
[ 224.721326] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 224.993317] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 224.998118] ata2.00: configured for UDMA/133
[ 225.105495] [drm] ib test on ring 5 succeeded
[ 225.106170] [drm] ib test on ring 6 succeeded
[ 225.106644] [drm] ib test on ring 7 succeeded
[ 225.174722] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 225.203828] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 226.075023] OOM killer enabled.
[ 226.075029] Restarting tasks ... done.
[ 226.076704] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 226.077696] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 226.077705] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[ 226.077709] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 226.078418] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[ 226.078427] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 226.078474] Bluetooth: hci0: RTL: cfg_sz 44, total sz 22540
[ 226.561649] PM: suspend exit
[ 226.577785] RTL8208 Fast Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 226.870702] r8169 0000:03:00.0 eth0: Link is Down
[ 226.921326] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 226.924199] ata1.00: configured for UDMA/100
[ 226.943657] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[ 228.438689] wlan0: 80 MHz not supported, disabling VHT
[ 228.448822] wlan0: authenticate with 6c:19:8f:cc:87:1c (local address=70:77:81:bf:d8:67)
[ 228.448833] wlan0: send auth to 6c:19:8f:cc:87:1c (try 1/3)
[ 228.450295] wlan0: authenticated
[ 228.457294] wlan0: associate with 6c:19:8f:cc:87:1c (try 1/3)
[ 228.461402] wlan0: RX AssocResp from 6c:19:8f:cc:87:1c (capab=0x431 status=0 aid=8)
[ 228.461636] wlan0: associated
[ 330.677065] wlan0: deauthenticating from 6c:19:8f:cc:87:1c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 332.408412] PM: suspend entry (deep)
[ 332.489136] Filesystems sync: 0.080 seconds
[ 332.665986] (NULL device *): Requesting firmware: radeon/mullins_pfp.bin
[ 332.666283] (NULL device *): Requesting firmware: radeon/mullins_me.bin
[ 332.666623] (NULL device *): Requesting firmware: radeon/mullins_ce.bin
[ 332.666726] (NULL device *): Requesting firmware: radeon/mullins_mec.bin
[ 332.666961] (NULL device *): Requesting firmware: radeon/mullins_rlc.bin
[ 332.667344] (NULL device *): Requesting firmware: radeon/mullins_sdma.bin
[ 332.667354] (NULL device *): Requesting firmware: radeon/bonaire_uvd.bin
[ 332.667523] (NULL device *): Requesting firmware: radeon/BONAIRE_vce.bin
[ 332.671153] (NULL device *): Requesting firmware: rtlwifi/rtl8723befw_36.bin
[ 332.672441] (NULL device *): Requesting firmware: rtl_nic/rtl8106e-1.fw
[ 332.672557] (NULL device *): Requesting firmware: regulatory.db
[ 332.672801] (NULL device *): Requesting firmware: regulatory.db.p7s
[ 332.675640] Freezing user space processes
[ 332.677391] Freezing user space processes completed (elapsed 0.001 seconds)
[ 332.677404] OOM killer disabled.
[ 332.677406] Freezing remaining freezable tasks
[ 332.678755] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 332.678795] printk: Suspending console(s) (use no_console_suspend to debug)
[ 332.697380] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 332.718634] ata1.00: Entering standby power mode
[ 333.198322] ACPI: EC: interrupt blocked
[ 333.223513] ACPI: PM: Preparing to enter system sleep state S3
[ 333.223906] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.224184] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.224452] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.224720] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.224987] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.225296] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.226199] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.226469] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.226736] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.227003] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.227269] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.227536] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.228106] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.228376] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.228642] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.228909] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.229176] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.229443] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.229744] ACPI: EC: event blocked
[ 333.229747] ACPI: EC: EC stopped
[ 333.229749] ACPI: PM: Saving platform NVS memory
[ 333.229847] Disabling non-boot CPUs ...
[ 333.231471] smpboot: CPU 1 is now offline
[ 333.233712] smpboot: CPU 2 is now offline
[ 333.235811] smpboot: CPU 3 is now offline
[ 333.236536] ACPI: PM: Low-level resume complete
[ 333.236560] ACPI: EC: EC started
[ 333.236561] ACPI: PM: Restoring platform NVS memory
[ 333.236585] LVT offset 0 assigned for vector 0x400
[ 333.236967] Enabling non-boot CPUs ...
[ 333.237019] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 333.239449] ACPI: \_PR_.C001: Found 2 idle states
[ 333.239557] microcode: CPU1: patch_level=0x07030106
[ 333.239731] CPU1 is up
[ 333.239764] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 333.242232] ACPI: \_PR_.C002: Found 2 idle states
[ 333.242339] microcode: CPU2: patch_level=0x07030106
[ 333.242493] CPU2 is up
[ 333.242524] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 333.244999] ACPI: \_PR_.C003: Found 2 idle states
[ 333.245115] microcode: CPU3: patch_level=0x07030106
[ 333.245285] CPU3 is up
[ 333.245811] ACPI: PM: Waking up from system sleep state S3
[ 333.246653] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.246917] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.247177] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.247435] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.247694] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.247953] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.248605] ACPI: EC: interrupt unblocked
[ 333.249790] ACPI: EC: event unblocked
[ 333.250133] rtlwifi: rtlwifi: wireless switch is on
[ 333.273934] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 333.274080] radeon 0000:00:01.0: WB enabled
[ 333.274095] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[ 333.274099] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04
[ 333.274101] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08
[ 333.274104] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[ 333.274106] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10
[ 333.274605] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
[ 333.274787] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18
[ 333.274790] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c
[ 333.275193] debugfs: File 'radeon_ring_gfx' in directory '0000:00:01.0' already present!
[ 333.275198] debugfs: File 'radeon_ring_cp1' in directory '0000:00:01.0' already present!
[ 333.275201] debugfs: File 'radeon_ring_cp2' in directory '0000:00:01.0' already present!
[ 333.275204] debugfs: File 'radeon_ring_dma1' in directory '0000:00:01.0' already present!
[ 333.275207] debugfs: File 'radeon_ring_dma2' in directory '0000:00:01.0' already present!
[ 333.276968] [drm] ring test on 0 succeeded in 2 usecs
[ 333.277035] [drm] ring test on 1 succeeded in 2 usecs
[ 333.277046] [drm] ring test on 2 succeeded in 2 usecs
[ 333.277233] [drm] ring test on 3 succeeded in 4 usecs
[ 333.277239] [drm] ring test on 4 succeeded in 3 usecs
[ 333.277242] debugfs: File 'radeon_ring_uvd' in directory '0000:00:01.0' already present!
[ 333.303071] [drm] ring test on 5 succeeded in 1 usecs
[ 333.303086] [drm] UVD initialized successfully.
[ 333.303088] debugfs: File 'radeon_ring_vce1' in directory '0000:00:01.0' already present!
[ 333.303092] debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already present!
[ 333.412254] [drm] ring test on 6 succeeded in 7 usecs
[ 333.412264] [drm] ring test on 7 succeeded in 2 usecs
[ 333.412265] [drm] VCE initialized successfully.
[ 333.412419] [drm] ib test on ring 0 succeeded in 0 usecs
[ 333.412561] [drm] ib test on ring 1 succeeded in 0 usecs
[ 333.412699] [drm] ib test on ring 2 succeeded in 0 usecs
[ 333.412838] [drm] ib test on ring 3 succeeded in 0 usecs
[ 333.412976] [drm] ib test on ring 4 succeeded in 0 usecs
[ 333.533896] usb 2-1.1: reset high-speed USB device number 3 using ehci-pci
[ 333.533942] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 333.821931] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 333.828162] ata2.00: configured for UDMA/133
[ 333.938113] [drm] ib test on ring 5 succeeded
[ 333.938695] [drm] ib test on ring 6 succeeded
[ 333.939153] [drm] ib test on ring 7 succeeded
[ 334.003304] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 334.032403] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 334.907756] OOM killer enabled.
[ 334.907761] Restarting tasks ... done.
[ 334.913598] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 334.916076] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 334.916088] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[ 334.916093] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 334.916853] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[ 334.916861] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 334.916933] Bluetooth: hci0: RTL: cfg_sz 44, total sz 22540
[ 335.506269] PM: suspend exit
[ 335.525826] RTL8208 Fast Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 335.681952] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 335.698223] ata1.00: configured for UDMA/100
[ 335.774416] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[ 335.803386] r8169 0000:03:00.0 eth0: Link is Down
[ 337.362689] wlan0: 80 MHz not supported, disabling VHT
[ 337.372793] wlan0: authenticate with 6c:19:8f:cc:87:1c (local address=70:77:81:bf:d8:67)
[ 337.372801] wlan0: send auth to 6c:19:8f:cc:87:1c (try 1/3)
[ 337.374688] wlan0: authenticated
[ 337.377947] wlan0: associate with 6c:19:8f:cc:87:1c (try 1/3)
[ 337.381768] wlan0: RX AssocResp from 6c:19:8f:cc:87:1c (capab=0x431 status=0 aid=8)
[ 337.381989] wlan0: associated
[ 404.316448] wlan0: deauthenticating from 6c:19:8f:cc:87:1c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 406.048634] PM: suspend entry (deep)
[ 406.145957] Filesystems sync: 0.097 seconds
[ 406.305848] (NULL device *): Requesting firmware: radeon/mullins_pfp.bin
[ 406.306171] (NULL device *): Requesting firmware: radeon/mullins_me.bin
[ 406.306347] (NULL device *): Requesting firmware: radeon/mullins_ce.bin
[ 406.306441] (NULL device *): Requesting firmware: radeon/mullins_mec.bin
[ 406.306614] (NULL device *): Requesting firmware: radeon/mullins_rlc.bin
[ 406.306909] (NULL device *): Requesting firmware: radeon/mullins_sdma.bin
[ 406.306912] (NULL device *): Requesting firmware: radeon/bonaire_uvd.bin
[ 406.307047] (NULL device *): Requesting firmware: radeon/BONAIRE_vce.bin
[ 406.309107] (NULL device *): Requesting firmware: rtlwifi/rtl8723befw_36.bin
[ 406.309167] (NULL device *): Requesting firmware: rtl_nic/rtl8106e-1.fw
[ 406.309249] (NULL device *): Requesting firmware: regulatory.db
[ 406.309433] (NULL device *): Requesting firmware: regulatory.db.p7s
[ 406.309517] (NULL device *): Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 406.310817] (NULL device *): Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 406.313217] Freezing user space processes
[ 406.314926] Freezing user space processes completed (elapsed 0.001 seconds)
[ 406.314939] OOM killer disabled.
[ 406.314942] Freezing remaining freezable tasks
[ 406.316287] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 406.316329] printk: Suspending console(s) (use no_console_suspend to debug)
[ 406.346127] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 406.356131] ata1.00: Entering standby power mode
[ 407.207034] ACPI: EC: interrupt blocked
[ 407.232316] ACPI: PM: Preparing to enter system sleep state S3
[ 407.232674] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.232952] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.233220] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.233488] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.233755] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.234025] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.234908] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.235178] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.235445] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.235712] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.235978] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.236245] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.236807] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.237076] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.237343] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.237610] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.237880] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.238148] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.238442] ACPI: EC: event blocked
[ 407.238445] ACPI: EC: EC stopped
[ 407.238447] ACPI: PM: Saving platform NVS memory
[ 407.238515] Disabling non-boot CPUs ...
[ 407.239953] smpboot: CPU 1 is now offline
[ 407.242080] smpboot: CPU 2 is now offline
[ 407.244106] smpboot: CPU 3 is now offline
[ 407.244919] ACPI: PM: Low-level resume complete
[ 407.244943] ACPI: EC: EC started
[ 407.244944] ACPI: PM: Restoring platform NVS memory
[ 407.244969] LVT offset 0 assigned for vector 0x400
[ 407.245333] Enabling non-boot CPUs ...
[ 407.245383] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 407.247819] ACPI: \_PR_.C001: Found 2 idle states
[ 407.247926] microcode: CPU1: patch_level=0x07030106
[ 407.248100] CPU1 is up
[ 407.248133] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 407.250612] ACPI: \_PR_.C002: Found 2 idle states
[ 407.250719] microcode: CPU2: patch_level=0x07030106
[ 407.250869] CPU2 is up
[ 407.250899] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 407.253370] ACPI: \_PR_.C003: Found 2 idle states
[ 407.253483] microcode: CPU3: patch_level=0x07030106
[ 407.253649] CPU3 is up
[ 407.254177] ACPI: PM: Waking up from system sleep state S3
[ 407.254995] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.255260] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.255520] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.255779] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.256037] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.256296] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.256947] ACPI: EC: interrupt unblocked
[ 407.258144] ACPI: EC: event unblocked
[ 407.258238] rtlwifi: rtlwifi: wireless switch is on
[ 407.282814] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 407.282948] radeon 0000:00:01.0: WB enabled
[ 407.282963] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[ 407.282966] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04
[ 407.282969] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08
[ 407.282972] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[ 407.282974] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10
[ 407.283454] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
[ 407.283634] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18
[ 407.283637] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c
[ 407.284043] debugfs: File 'radeon_ring_gfx' in directory '0000:00:01.0' already present!
[ 407.284049] debugfs: File 'radeon_ring_cp1' in directory '0000:00:01.0' already present!
[ 407.284051] debugfs: File 'radeon_ring_cp2' in directory '0000:00:01.0' already present!
[ 407.284054] debugfs: File 'radeon_ring_dma1' in directory '0000:00:01.0' already present!
[ 407.284057] debugfs: File 'radeon_ring_dma2' in directory '0000:00:01.0' already present!
[ 407.285819] [drm] ring test on 0 succeeded in 3 usecs
[ 407.285885] [drm] ring test on 1 succeeded in 2 usecs
[ 407.285897] [drm] ring test on 2 succeeded in 2 usecs
[ 407.286083] [drm] ring test on 3 succeeded in 4 usecs
[ 407.286090] [drm] ring test on 4 succeeded in 3 usecs
[ 407.286093] debugfs: File 'radeon_ring_uvd' in directory '0000:00:01.0' already present!
[ 407.311923] [drm] ring test on 5 succeeded in 1 usecs
[ 407.311937] [drm] UVD initialized successfully.
[ 407.311940] debugfs: File 'radeon_ring_vce1' in directory '0000:00:01.0' already present!
[ 407.311943] debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already present!
[ 407.421105] [drm] ring test on 6 succeeded in 7 usecs
[ 407.421115] [drm] ring test on 7 succeeded in 2 usecs
[ 407.421116] [drm] VCE initialized successfully.
[ 407.421270] [drm] ib test on ring 0 succeeded in 0 usecs
[ 407.421412] [drm] ib test on ring 1 succeeded in 0 usecs
[ 407.421549] [drm] ib test on ring 2 succeeded in 0 usecs
[ 407.421690] [drm] ib test on ring 3 succeeded in 0 usecs
[ 407.421829] [drm] ib test on ring 4 succeeded in 0 usecs
[ 407.542542] usb 2-1.1: reset high-speed USB device number 3 using ehci-pci
[ 407.546588] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 407.830645] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 407.836778] ata2.00: configured for UDMA/133
[ 407.922675] [drm] ib test on ring 5 succeeded
[ 407.923287] [drm] ib test on ring 6 succeeded
[ 407.923758] [drm] ib test on ring 7 succeeded
[ 408.015760] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 408.044880] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 408.892158] OOM killer enabled.
[ 408.892163] Restarting tasks ... done.
[ 408.898571] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 408.900418] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 408.900433] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[ 408.900440] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 408.901469] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[ 408.901474] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 408.901520] Bluetooth: hci0: RTL: cfg_sz 44, total sz 22540
[ 409.482608] PM: suspend exit
[ 409.503021] RTL8208 Fast Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 409.690650] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 409.708894] ata1.00: configured for UDMA/100
[ 409.761416] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[ 409.791932] r8169 0000:03:00.0 eth0: Link is Down
[ 411.362132] wlan0: 80 MHz not supported, disabling VHT
[ 411.372278] wlan0: authenticate with 6c:19:8f:cc:87:1c (local address=70:77:81:bf:d8:67)
[ 411.372297] wlan0: send auth to 6c:19:8f:cc:87:1c (try 1/3)
[ 411.373796] wlan0: authenticated
[ 411.374759] wlan0: associate with 6c:19:8f:cc:87:1c (try 1/3)
[ 411.379614] wlan0: RX AssocResp from 6c:19:8f:cc:87:1c (capab=0x431 status=0 aid=8)
[ 411.379860] wlan0: associated
More information about the amd-gfx
mailing list