[PATCH] drm/amd/pm: wait for completion of the EnableGfxImu command

Zhang, Yifan Yifan1.Zhang at amd.com
Tue Oct 10 05:30:49 UTC 2023


[AMD Official Use Only - General]

I'm wondering why it is "without waiting" in the first place ? It doesn't make sense to continue driver loading if power up GFX fails. Can we apply the change regardless of load types ?

-----Original Message-----
From: Huang, Tim <Tim.Huang at amd.com>
Sent: Tuesday, October 10, 2023 12:47 PM
To: amd-gfx at lists.freedesktop.org
Cc: Deucher, Alexander <Alexander.Deucher at amd.com>; Zhang, Yifan <Yifan1.Zhang at amd.com>; Huang, Tim <Tim.Huang at amd.com>
Subject: [PATCH] drm/amd/pm: wait for completion of the EnableGfxImu command

Wait for completion of sending the EnableGfxImu message when using the PSP FW loading.

Signed-off-by: Tim Huang <Tim.Huang at amd.com>
---
 drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
index 8dc683c02a7d..bcb7ab9d2221 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
@@ -82,6 +82,8 @@ MODULE_FIRMWARE("amdgpu/smu_13_0_10.bin");
 #define PCIE_LC_SPEED_CNTL__LC_CURRENT_DATA_RATE_MASK 0xC000  #define PCIE_LC_SPEED_CNTL__LC_CURRENT_DATA_RATE__SHIFT 0xE

+#define ENABLE_IMU_ARG_GFXOFF_ENABLE           1
+
 static const int link_width[] = {0, 1, 2, 4, 8, 12, 16};

 const int pmfw_decoded_link_speed[5] = {1, 2, 3, 4, 5}; @@ -2301,11 +2303,17 @@ int smu_v13_0_baco_exit(struct smu_context *smu)  int smu_v13_0_set_gfx_power_up_by_imu(struct smu_context *smu)  {
        uint16_t index;
+       struct amdgpu_device *adev = smu->adev;
+
+       if (adev->firmware.load_type == AMDGPU_FW_LOAD_PSP) {
+               return smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_EnableGfxImu,
+                                                      ENABLE_IMU_ARG_GFXOFF_ENABLE, NULL);
+       }

        index = smu_cmn_to_asic_specific_index(smu, CMN2ASIC_MAPPING_MSG,
                                               SMU_MSG_EnableGfxImu);
-       /* Param 1 to tell PMFW to enable GFXOFF feature */
-       return smu_cmn_send_msg_without_waiting(smu, index, 1);
+       return smu_cmn_send_msg_without_waiting(smu, index,
+                                               ENABLE_IMU_ARG_GFXOFF_ENABLE);
 }

 int smu_v13_0_od_edit_dpm_table(struct smu_context *smu,
--
2.39.2



More information about the amd-gfx mailing list