[PATCH 1/3] drm/amd: Move microcode init step to early_init()

[Mario Limonciello]

The intention for early init is to find any missing microcode early
and fail the driver load if it's missing.  Move this step to earlier
in driver init to match other IP blocks.

Signed-off-by: Mario Limonciello <mario.limonciello at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
index 27b224b0688a..f0957d060750 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
@@ -589,6 +589,14 @@ static int gfx_v11_0_init_microcode(struct amdgpu_device *adev)
 	adev->gfx.mec2_fw = NULL;
 
 	gfx_v11_0_check_fw_cp_gfx_shadow(adev);
+
+	if (adev->gfx.imu.funcs && adev->gfx.imu.funcs->init_microcode) {
+		err = adev->gfx.imu.funcs->init_microcode(adev);
+		if (err)
+			DRM_ERROR("Failed to init imu firmware!\n");
+		return err;
+	}
+
 out:
 	if (err) {
 		amdgpu_ucode_release(&adev->gfx.pfp_fw);
@@ -1395,14 +1403,6 @@ static int gfx_v11_0_sw_init(void *handle)
 
 	adev->gfx.gfx_current_status = AMDGPU_GFX_NORMAL_MODE;
 
-	if (adev->gfx.imu.funcs) {
-		if (adev->gfx.imu.funcs->init_microcode) {
-			r = adev->gfx.imu.funcs->init_microcode(adev);
-			if (r)
-				DRM_ERROR("Failed to load imu firmware!\n");
-		}
-	}
-
 	gfx_v11_0_me_init(adev);
 
 	r = gfx_v11_0_rlc_init(adev);
-- 
2.34.1