[PATCH] drm/amdkfd: fix add queue process context clear for hsa non-init cases
Kim, Jonathan
Jonathan.Kim at amd.com
Wed Sep 13 01:40:06 UTC 2023
[Public]
> -----Original Message-----
> From: Kuehling, Felix <Felix.Kuehling at amd.com>
> Sent: Tuesday, September 12, 2023 9:01 PM
> To: Kim, Jonathan <Jonathan.Kim at amd.com>; amd-gfx at lists.freedesktop.org
> Cc: Ji, Ruili <Ruili.Ji at amd.com>; Guo, Shikai <Shikai.Guo at amd.com>; Huang,
> JinHuiEric <JinHuiEric.Huang at amd.com>
> Subject: Re: [PATCH] drm/amdkfd: fix add queue process context clear for hsa
> non-init cases
>
> On 2023-09-12 20:53, Kim, Jonathan wrote:
> > [Public]
> >
> >> -----Original Message-----
> >> From: Kuehling, Felix <Felix.Kuehling at amd.com>
> >> Sent: Tuesday, September 12, 2023 8:36 PM
> >> To: Kim, Jonathan <Jonathan.Kim at amd.com>; amd-
> gfx at lists.freedesktop.org
> >> Cc: Ji, Ruili <Ruili.Ji at amd.com>; Guo, Shikai <Shikai.Guo at amd.com>;
> >> JinHuiEricHuang at amd.com
> >> Subject: Re: [PATCH] drm/amdkfd: fix add queue process context clear for
> hsa
> >> non-init cases
> >>
> >> On 2023-09-12 8:17, Jonathan Kim wrote:
> >>> There are cases where HSA is not initialized when adding queues
> >> This statement doesn't make sense to me. If HSA is not initialized, it
> >> means user mode hasn't opened the KFD device. So it can't create queues.
> >> What do you really mean here?
> > I meant the call to runtime enable e.g. KFD test can add a queue without
> runtime enable call.
>
> OK, this can also happen when you run an older version of the HSA
> runtime that doesn't support the ROCm debugger yet. Please update the
> patch description accordingly.
Ok will do thanks. Sorry for the confusing description.
For some reason I forgot that HSA was umbrella term and doesn't only refer to the ROCr component.
Thanks,
Jon
>
> Thanks,
> Felix
>
>
> >
> > Thanks,
> >
> > Jon
> >
> >> Regards,
> >> Felix
> >>
> >>
> >>> and
> >>> the ADD_QUEUE API should clear the MES process context instead of
> >>> SET_SHADER_DEBUGGER.
> >>>
> >>> The only time ADD_QUEUE.skip_process_ctx_clear is required is for
> >>> debugger use cases and a debugged process is always runtime enabled
> >>> when adding a queue.
> >>>
> >>> Tested-by: Shikai Guo <shikai.guo at amd.com>
> >>> Signed-off-by: Jonathan Kim <jonathan.kim at amd.com>
> >>> ---
> >>> drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 6 ++++--
> >>> 1 file changed, 4 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
> >> b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
> >>> index 6d07a5dd2648..77159b03a422 100644
> >>> --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
> >>> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
> >>> @@ -227,8 +227,10 @@ static int add_queue_mes(struct
> >> device_queue_manager *dqm, struct queue *q,
> >>> queue_input.tba_addr = qpd->tba_addr;
> >>> queue_input.tma_addr = qpd->tma_addr;
> >>> queue_input.trap_en = !kfd_dbg_has_cwsr_workaround(q->device);
> >>> - queue_input.skip_process_ctx_clear = qpd->pqm->process-
> >>> debug_trap_enabled ||
> >>> -
> >> kfd_dbg_has_ttmps_always_setup(q->device);
> >>> + queue_input.skip_process_ctx_clear =
> >>> + qpd->pqm->process->runtime_info.runtime_state ==
> >> DEBUG_RUNTIME_STATE_ENABLED &&
> >>> + (qpd->pqm->process-
> >>> debug_trap_enabled ||
> >>> +
> >> kfd_dbg_has_ttmps_always_setup(q->device));
> >>> queue_type = convert_to_mes_queue_type(q->properties.type);
> >>> if (queue_type < 0) {
More information about the amd-gfx
mailing list