[RFC PATCH v2 3/5] drm/amd/display: create DCN3-specific log for MPC state
Melissa Wen
mwen at igalia.com
Tue Sep 26 12:38:01 UTC 2023
On 09/25, Harry Wentland wrote:
>
>
> On 2023-09-13 12:43, Melissa Wen wrote:
> > Logging DCN3 MPC state was following DCN1 implementation that doesn't
> > consider new DCN3 MPC color blocks. Create new elements according to
> > DCN3 MPC color caps and a new DCN3-specific function for reading MPC
> > data.
> >
> > Signed-off-by: Melissa Wen <mwen at igalia.com>
> > ---
> > .../gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c | 55 ++++++++++++++++++-
> > drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h | 13 +++++
> > 2 files changed, 67 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c
> > index d1500b223858..d164fbf89212 100644
> > --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c
> > +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c
> > @@ -1382,8 +1382,61 @@ static void mpc3_set_mpc_mem_lp_mode(struct mpc *mpc)
> > }
> > }
> >
> > +static void mpc3_read_mpcc_state(
> > + struct mpc *mpc,
> > + int mpcc_inst,
> > + struct mpcc_state *s)
> > +{
> > + struct dcn30_mpc *mpc30 = TO_DCN30_MPC(mpc);
> > + uint32_t rmu_status = 0xf;
> > +
> > + REG_GET(MPCC_OPP_ID[mpcc_inst], MPCC_OPP_ID, &s->opp_id);
> > + REG_GET(MPCC_TOP_SEL[mpcc_inst], MPCC_TOP_SEL, &s->dpp_id);
> > + REG_GET(MPCC_BOT_SEL[mpcc_inst], MPCC_BOT_SEL, &s->bot_mpcc_id);
> > + REG_GET_4(MPCC_CONTROL[mpcc_inst], MPCC_MODE, &s->mode,
> > + MPCC_ALPHA_BLND_MODE, &s->alpha_mode,
> > + MPCC_ALPHA_MULTIPLIED_MODE, &s->pre_multiplied_alpha,
> > + MPCC_BLND_ACTIVE_OVERLAP_ONLY, &s->overlap_only);
> > + REG_GET_2(MPCC_STATUS[mpcc_inst], MPCC_IDLE, &s->idle,
> > + MPCC_BUSY, &s->busy);
> > +
> > + /* Color blocks state */
> > + REG_GET(MPC_RMU_CONTROL, MPC_RMU0_MUX_STATUS, &rmu_status);
> > + if (rmu_status == mpcc_inst) {
> > + REG_GET(SHAPER_CONTROL[0],
> > + MPC_RMU_SHAPER_LUT_MODE_CURRENT, &s->shaper_lut_mode);
> > + REG_GET(RMU_3DLUT_MODE[0],
> > + MPC_RMU_3DLUT_MODE_CURRENT, &s->lut3d_mode);
> > + REG_GET(RMU_3DLUT_READ_WRITE_CONTROL[0],
> > + MPC_RMU_3DLUT_30BIT_EN, &s->lut3d_bit_depth);
> > + REG_GET(RMU_3DLUT_MODE[0],
> > + MPC_RMU_3DLUT_SIZE, &s->lut3d_size);
> > + } else {
> > + REG_GET(SHAPER_CONTROL[1],
> > + MPC_RMU_SHAPER_LUT_MODE_CURRENT, &s->shaper_lut_mode);
> > + REG_GET(RMU_3DLUT_MODE[1],
> > + MPC_RMU_3DLUT_MODE_CURRENT, &s->lut3d_mode);
> > + REG_GET(RMU_3DLUT_READ_WRITE_CONTROL[1],
> > + MPC_RMU_3DLUT_30BIT_EN, &s->lut3d_bit_depth);
> > + REG_GET(RMU_3DLUT_MODE[1],
> > + MPC_RMU_3DLUT_SIZE, &s->lut3d_size);
> > + }
> > + REG_GET_2(MPCC_OGAM_CONTROL[mpcc_inst],
> > + MPCC_OGAM_MODE_CURRENT, &s->rgam_mode,
> > + MPCC_OGAM_SELECT_CURRENT, &s->rgam_lut);
> > + REG_GET(MPCC_GAMUT_REMAP_MODE[mpcc_inst],
> > + MPCC_GAMUT_REMAP_MODE_CURRENT, &s->gamut_remap_mode);
> > + if (s->gamut_remap_mode == 1) {
> > + s->gamut_remap_c11_c12 = REG_READ(MPC_GAMUT_REMAP_C11_C12_A[mpcc_inst]);
> > + s->gamut_remap_c33_c34 = REG_READ(MPC_GAMUT_REMAP_C33_C34_A[mpcc_inst]);
> > + } else if (s->gamut_remap_mode == 2) {
> > + s->gamut_remap_c11_c12 = REG_READ(MPC_GAMUT_REMAP_C11_C12_B[mpcc_inst]);
> > + s->gamut_remap_c33_c34 = REG_READ(MPC_GAMUT_REMAP_C33_C34_B[mpcc_inst]);
>
> Any reason we're getting (and printing) only the first and last
> coefficients? Is it to avoid printing lines that are too wide?
I'm unable to reach the other coefficients through this
`MPC_GAMUT_REMAP` register prefix. But I'm probably missing something
since I can see the registers using UMR. I'll try to find the right path
and update it.
Melissa
>
> Harry
>
> > + }
> > +}
> > +
> > static const struct mpc_funcs dcn30_mpc_funcs = {
> > - .read_mpcc_state = mpc1_read_mpcc_state,
> > + .read_mpcc_state = mpc3_read_mpcc_state,
> > .insert_plane = mpc1_insert_plane,
> > .remove_mpcc = mpc1_remove_mpcc,
> > .mpc_init = mpc1_mpc_init,
> > diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h b/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
> > index 8d86159d9de0..e60b3503605b 100644
> > --- a/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
> > +++ b/drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h
> > @@ -193,6 +193,19 @@ struct mpcc_state {
> > uint32_t overlap_only;
> > uint32_t idle;
> > uint32_t busy;
> > + uint32_t shaper_lut_mode;
> > + uint32_t lut3d_mode;
> > + uint32_t lut3d_bit_depth;
> > + uint32_t lut3d_size;
> > + uint32_t rgam_mode;
> > + uint32_t rgam_lut;
> > + uint32_t gamut_remap_mode;
> > + uint32_t gamut_remap_c11_c12;
> > + uint32_t gamut_remap_c13_c14;
> > + uint32_t gamut_remap_c21_c22;
> > + uint32_t gamut_remap_c23_c24;
> > + uint32_t gamut_remap_c31_c32;
> > + uint32_t gamut_remap_c33_c34;
> > };
> >
> > /**
>
More information about the amd-gfx
mailing list