[PATCH 13/15] platform/x86/amd/pmf: Add PMF-AMDGPU set interface
Shyam Sundar S K
Shyam-sundar.S-k at amd.com
Tue Sep 26 13:48:17 UTC 2023
Hi Christian,
On 9/26/2023 6:47 PM, Christian König wrote:
> Am 26.09.23 um 14:56 schrieb Hans de Goede:
>> Hi,
>>
>> On 9/26/23 13:24, Shyam Sundar S K wrote:
>>> Hi Hans,
>>>
>>> On 9/26/2023 4:05 PM, Hans de Goede wrote:
>>>> Hi,
>>>>
>>>> On 9/22/23 19:50, Shyam Sundar S K wrote:
>>>>> For the Smart PC Solution to fully work, it has to enact to the
>>>>> actions
>>>>> coming from TA. Add the initial code path for set interface to
>>>>> AMDGPU.
>>>>>
>>>>> Co-developed-by: Mario Limonciello <mario.limonciello at amd.com>
>>>>> Signed-off-by: Mario Limonciello <mario.limonciello at amd.com>
>>>>> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k at amd.com>
>>>>> ---
>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c | 21 +++++++++++++++++++++
>>>>> drivers/platform/x86/amd/pmf/pmf.h | 2 ++
>>>>> drivers/platform/x86/amd/pmf/tee-if.c | 19 +++++++++++++++++--
>>>>> include/linux/amd-pmf-io.h | 1 +
>>>>> 4 files changed, 41 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c
>>>>> b/drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c
>>>>> index 232d11833ddc..5c567bff0548 100644
>>>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c
>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c
>>>>> @@ -68,3 +68,24 @@ int amd_pmf_get_gfx_data(struct
>>>>> amd_gpu_pmf_data *pmf)
>>>>> return 0;
>>>>> }
>>>>> EXPORT_SYMBOL_GPL(amd_pmf_get_gfx_data);
>>>>> +
>>>>> +int amd_pmf_set_gfx_data(struct amd_gpu_pmf_data *pmf)
>>>>> +{
>>>>> + struct drm_device *drm_dev = pci_get_drvdata(pmf->gpu_dev);
>>>>> + struct amdgpu_device *adev = drm_to_adev(drm_dev);
>>>>> + struct backlight_device *bd;
>>>>> +
>>>>> + if (!(adev->flags & AMD_IS_APU)) {
>>>>> + DRM_ERROR("PMF-AMDGPU interface not supported\n");
>>>>> + return -ENODEV;
>>>>> + }
>>>>> +
>>>>> + bd = backlight_device_get_by_type(BACKLIGHT_RAW);
>>>>> + if (!bd)
>>>>> + return -ENODEV;
>>>> This assumes that the backlight is always controller by the amdgpu's
>>>> native backlight driver, but it might e.g. also be handled by
>>>> eacpi-video or by nvidia_wmi_ec_backlight (when using an AMD APU +
>>>> nvidia dgpu).
>>> PMF is meant for AMD APUs(atleast for now) and the _HID will only be
>>> made visible if its AMD laptop. So using amdgpu's native BACKLIGHT_RAW
>>> should be safe, right?
>> Users can pass say acpi_backlight=video and use the acpi_video
>> driver for backlight control instead of the native GPU backlight
>> control.
>>
>>>> For now what should be done here is to call
>>>> acpi_video_get_backlight_type()
>>>> and then translate the return value from this into a backlight-type:
>>>>
>>>> acpi_backlight_video -> BACKLIGHT_FIRMWARE
>>>> acpi_backlight_vendor, -> BACKLIGHT_PLATFORM
>>>> acpi_backlight_native, -> BACKLIGHT_RAW
>>>> acpi_backlight_nvidia_wmi_ec, -> BACKLIGHT_FIRMWARE
>>>> acpi_backlight_apple_gmux, -> BACKLIGHT_PLATFORM
>>>>
>>> I can add this change in the v2, do you insist on this?
>> Insist is a strong word, but I think that it is a good idea to have
>> this. Evenutally it looks like this code will need to either
>> integrate with
>> the drm drivers lot more; or the drm core needs to export some special
>> hooks for this which the PMF code can then call.
>>
>> Actually thinking more about this, I think that the right thing to do
>> here is make some code register brightness control as a cooling device
>> (which I think is already done in some cases) and then have the PMF
>> code use the cooling-device APIs for this.
>>
>> IMHO that would be a much cleaner solution then this hack.
>
> Yeah, fully agree with Hans. This looks like a rather extreme hack to me.
Sure. Let me think in this direction.
>
> Apart from that what exactly is this thing supposed to do? Prevent
> overheating by reducing the brightness?
Yes that can be one of the cases. But the thought process here is to
help OEMs build their own policies.
A policy is combination of inputs and outputs. Inputs are the
conditions that has to be met and outputs are the actions to be set/done.
The output actions come from PMF TA. One example policy apart from the
case you mentioned is:
if ambient light (received from amd_sfh) is low ; reduce the screen
brightness (received from amdgpu) or vice versa.
Thanks,
Shyam
>
> Regards,
> Christian.
>
>>
>> Regards,
>>
>> Hans
>>
>>
>>
>>> Thanks,
>>> Shyam
>>>
>>>> Also I'm worried about probe order here, this code currently assumes
>>>> that the GPU or other backlight driver has loaded before this runs,
>>>> which is not necessarily the case.
>>>>
>>>> I think that if the backlight_device_get_by_type() fails this
>>>> should be retried say every 10 seconds from some delayed workqueue
>>>> for at least a couple of minutes after boot.
>>>>
>>>> Regards,
>>>>
>>>> Hans
>>>>
>>>>
>>>>
>>>>
>>>>> +
>>>>> + backlight_device_set_brightness(bd, pmf->brightness);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +EXPORT_SYMBOL_GPL(amd_pmf_set_gfx_data);
>>>>> diff --git a/drivers/platform/x86/amd/pmf/pmf.h
>>>>> b/drivers/platform/x86/amd/pmf/pmf.h
>>>>> index 9032df4ba48a..ce89cc0daa5a 100644
>>>>> --- a/drivers/platform/x86/amd/pmf/pmf.h
>>>>> +++ b/drivers/platform/x86/amd/pmf/pmf.h
>>>>> @@ -73,6 +73,7 @@
>>>>> #define PMF_POLICY_STT_SKINTEMP_APU 7
>>>>> #define PMF_POLICY_STT_SKINTEMP_HS2 8
>>>>> #define PMF_POLICY_SYSTEM_STATE 9
>>>>> +#define PMF_POLICY_DISPLAY_BRIGHTNESS 12
>>>>> #define PMF_POLICY_P3T 38
>>>>> /* TA macros */
>>>>> @@ -480,6 +481,7 @@ enum ta_pmf_error_type {
>>>>> };
>>>>> struct pmf_action_table {
>>>>> + unsigned long display_brightness;
>>>>> enum system_state system_state;
>>>>> unsigned long spl; /* in mW */
>>>>> unsigned long sppt; /* in mW */
>>>>> diff --git a/drivers/platform/x86/amd/pmf/tee-if.c
>>>>> b/drivers/platform/x86/amd/pmf/tee-if.c
>>>>> index 1608996654e8..eefffff83a4c 100644
>>>>> --- a/drivers/platform/x86/amd/pmf/tee-if.c
>>>>> +++ b/drivers/platform/x86/amd/pmf/tee-if.c
>>>>> @@ -79,10 +79,10 @@ static int amd_pmf_update_uevents(struct
>>>>> amd_pmf_dev *dev, u16 event)
>>>>> return 0;
>>>>> }
>>>>> -static void amd_pmf_apply_policies(struct amd_pmf_dev *dev,
>>>>> struct ta_pmf_enact_result *out)
>>>>> +static int amd_pmf_apply_policies(struct amd_pmf_dev *dev,
>>>>> struct ta_pmf_enact_result *out)
>>>>> {
>>>>> u32 val, event = 0;
>>>>> - int idx;
>>>>> + int idx, ret;
>>>>> for (idx = 0; idx < out->actions_count; idx++) {
>>>>> val = out->actions_list[idx].value;
>>>>> @@ -160,8 +160,23 @@ static void amd_pmf_apply_policies(struct
>>>>> amd_pmf_dev *dev, struct ta_pmf_enact_
>>>>> dev->prev_data->system_state = 0;
>>>>> }
>>>>> break;
>>>>> +
>>>>> + case PMF_POLICY_DISPLAY_BRIGHTNESS:
>>>>> + ret = amd_pmf_get_gfx_data(&dev->gfx_data);
>>>>> + if (ret)
>>>>> + return ret;
>>>>> +
>>>>> + dev->prev_data->display_brightness =
>>>>> dev->gfx_data.brightness;
>>>>> + if (dev->prev_data->display_brightness != val) {
>>>>> + dev->gfx_data.brightness = val;
>>>>> + amd_pmf_set_gfx_data(&dev->gfx_data);
>>>>> + dev_dbg(dev->dev, "update DISPLAY_BRIGHTNESS :
>>>>> %d\n", val);
>>>>> + }
>>>>> + break;
>>>>> }
>>>>> }
>>>>> +
>>>>> + return 0;
>>>>> }
>>>>> static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
>>>>> diff --git a/include/linux/amd-pmf-io.h b/include/linux/amd-pmf-io.h
>>>>> index a2d4af231362..ecae387ddaa6 100644
>>>>> --- a/include/linux/amd-pmf-io.h
>>>>> +++ b/include/linux/amd-pmf-io.h
>>>>> @@ -25,4 +25,5 @@ struct amd_gpu_pmf_data {
>>>>> };
>>>>> int amd_pmf_get_gfx_data(struct amd_gpu_pmf_data *pmf);
>>>>> +int amd_pmf_set_gfx_data(struct amd_gpu_pmf_data *pmf);
>>>>> #endif
>
More information about the amd-gfx
mailing list