v6.11-rc4 amdgpu regression from v6.10.0
Andrew Worsley
amworsley at gmail.com
Mon Aug 19 12:43:24 UTC 2024
The v6.11-rc4 linux hangs during amdgpu start up where as the v6.10.0
is fine. I had to take a photo of the screen (see attachment) from
which I generated
the following summary:
Booting linux v6.11-rc4 :
...
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
initializing kernel modesetting (IP DISCOVERY 0x1002:0x15BF 0xF111:0x0005 0xC2).
register mmio base: 0x90500000
register mmio size: 524288
add ip block number 0 <soc21_common>
add ip block number 1 <gmc_v11_0>
add ip block number 2 <ih_v6_0>
add ip block number 3 <psp>
add ip block number 4 <smu>
add ip block number 5 <dm>
add ip block number 6 <gfx_v11_0>
add ip block number 7 <sdma_v6_0>
add ip block number 8 <vcn_v4_0>
add ip block number 9 <jpeg_v4_0>
add ip block number 10 <mes_v11_0>
amdgpu 0000:c1:00.0: amdgpu: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-PHXGENERIC-001
amdgpu 0000:c1:00.0: Direct firmware load for
amdgpu/gc_11_0_1_mes_2.bin failed with error -2
amdgpu 0000:c1:00.0: amdgpu: try to fall back to amdgpu/gc_11_0_1_mes.bin
*** Hangs with this displayed on the console ****
- have to power off computer to recover
Perfectly successful boot with v6.10.0 kernel :
[ 2.478302] [drm] amdgpu kernel modesetting enabled.
[ 2.485206] amdgpu: Virtual CRAT table created for CPU
[ 2.485817] amdgpu: Topology: Add CPU node
[ 2.486525] [drm] initializing kernel modesetting (IP DISCOVERY
0x1002:0x15BF 0xF111:0x0005 0xC2).
[ 2.487225] [drm] register mmio base: 0x90500000
[ 2.487809] [drm] register mmio size: 524288
[ 2.492629] [drm] add ip block number 0 <soc21_common>
[ 2.493310] [drm] add ip block number 1 <gmc_v11_0>
[ 2.493973] [drm] add ip block number 2 <ih_v6_0>
[ 2.494617] [drm] add ip block number 3 <psp>
[ 2.495255] [drm] add ip block number 4 <smu>
[ 2.495880] [drm] add ip block number 5 <dm>
[ 2.496499] [drm] add ip block number 6 <gfx_v11_0>
[ 2.497114] [drm] add ip block number 7 <sdma_v6_0>
[ 2.497717] [drm] add ip block number 8 <vcn_v4_0>
[ 2.498313] [drm] add ip block number 9 <jpeg_v4_0>
[ 2.498899] [drm] add ip block number 10 <mes_v11_0>
[ 2.499479] amdgpu 0000:c1:00.0: amdgpu: Fetched VBIOS from VFCT
[ 2.500063] amdgpu: ATOM BIOS: 113-PHXGENERIC-001
[ 2.501760] [drm] VCN(0) encode/decode are enabled in VM mode
[ 2.502588] amdgpu 0000:c1:00.0: [drm:jpeg_v4_0_early_init
[amdgpu]] JPEG decode is enabled in VM mode
[ 2.503426] amdgpu 0000:c1:00.0: Direct firmware load for
amdgpu/gc_11_0_1_mes_2.bin failed with error -2
[ 2.504043] [drm] try to fall back to amdgpu/gc_11_0_1_mes.bin
[ 2.505117] Console: switching to colour dummy device 80x25
[ 2.505144] amdgpu 0000:c1:00.0: vgaarb: deactivate vga console
[ 2.505147] amdgpu 0000:c1:00.0: amdgpu: Trusted Memory Zone (TMZ)
feature enabled
[ 2.505193] [drm] vm size is 262144 GB, 4 levels, block size is
9-bit, fragment size is 9-bit
[ 2.505218] amdgpu 0000:c1:00.0: amdgpu: VRAM: 2048M
0x0000008000000000 - 0x000000807FFFFFFF (2048M used)
[ 2.505223] amdgpu 0000:c1:00.0: amdgpu: GART: 512M
0x00007FFF00000000 - 0x00007FFF1FFFFFFF
[ 2.505237] [drm] Detected VRAM RAM=2048M, BAR=2048M
[ 2.505240] [drm] RAM width 128bits DDR5
[ 2.505418] [drm] amdgpu: 2048M of VRAM memory ready
[ 2.505422] [drm] amdgpu: 31048M of GTT memory ready.
[ 2.505436] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.505600] [drm] PCIE GART of 512M enabled (table at 0x000000807FD00000).
[ 2.506246] [drm] Loading DMUB firmware via PSP: version=0x08000500
[ 2.506550] [drm] Found VCN firmware Version ENC: 1.10 DEC: 5 VEP:
0 Revision: 0
[ 2.506558] amdgpu 0000:c1:00.0: amdgpu: Will use PSP to load VCN firmware
[ 2.531970] amdgpu 0000:c1:00.0: amdgpu: reserve 0x4000000 from
0x8078000000 for PSP TMR
-------------- next part --------------
A non-text attachment was scrubbed...
Name: screenshot.jpg
Type: image/jpeg
Size: 199691 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20240819/90ee3b3d/attachment-0001.jpg>
More information about the amd-gfx
mailing list