[PATCH 07/14] drm/amd/display: Refactor dccg35_get_other_enabled_symclk_fe
Hamza Mahfooz
hamza.mahfooz at amd.com
Tue Aug 27 16:37:27 UTC 2024
From: Nicholas Susanto <Nicholas.Susanto at amd.com>
[Why]
Function used to check the number of FEs connected to the current BE.
This was then used to determine if the symclk could be disabled, if
all FEs were disconnected. However, the function would skip over the
primary FE and return 0 when the primary FE was still connected. This
caused black screens on driver disable with an MST daisy chain hooked
up.
[How]
Refactor the function to correctly return the number of FEs connected
to the input BE. Also, rename it for clarity.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto at amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz at amd.com>
---
.../amd/display/dc/dccg/dcn35/dcn35_dccg.c | 65 +++++++------------
1 file changed, 25 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dccg/dcn35/dcn35_dccg.c b/drivers/gpu/drm/amd/display/dc/dccg/dcn35/dcn35_dccg.c
index 60a84de4c5d1..889f39694cb7 100644
--- a/drivers/gpu/drm/amd/display/dc/dccg/dcn35/dcn35_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dccg/dcn35/dcn35_dccg.c
@@ -1905,47 +1905,32 @@ static void dccg35_enable_symclk_se(struct dccg *dccg, uint32_t stream_enc_inst,
}
/*get other front end connected to this backend*/
-static uint8_t dccg35_get_other_enabled_symclk_fe(struct dccg *dccg, uint32_t stream_enc_inst, uint32_t link_enc_inst)
+static uint8_t dccg35_get_number_enabled_symclk_fe_connected_to_be(struct dccg *dccg, uint32_t link_enc_inst)
{
uint8_t num_enabled_symclk_fe = 0;
- uint32_t be_clk_en = 0, fe_clk_en[5] = {0}, be_clk_sel[5] = {0};
+ uint32_t fe_clk_en[5] = {0}, be_clk_sel[5] = {0};
struct dcn_dccg *dccg_dcn = TO_DCN_DCCG(dccg);
- switch (link_enc_inst) {
- case 0:
- REG_GET_3(SYMCLKA_CLOCK_ENABLE, SYMCLKA_CLOCK_ENABLE, &be_clk_en,
- SYMCLKA_FE_EN, &fe_clk_en[0],
- SYMCLKA_FE_SRC_SEL, &be_clk_sel[0]);
- break;
- case 1:
- REG_GET_3(SYMCLKB_CLOCK_ENABLE, SYMCLKB_CLOCK_ENABLE, &be_clk_en,
- SYMCLKB_FE_EN, &fe_clk_en[1],
- SYMCLKB_FE_SRC_SEL, &be_clk_sel[1]);
- break;
- case 2:
- REG_GET_3(SYMCLKC_CLOCK_ENABLE, SYMCLKC_CLOCK_ENABLE, &be_clk_en,
- SYMCLKC_FE_EN, &fe_clk_en[2],
- SYMCLKC_FE_SRC_SEL, &be_clk_sel[2]);
- break;
- case 3:
- REG_GET_3(SYMCLKD_CLOCK_ENABLE, SYMCLKD_CLOCK_ENABLE, &be_clk_en,
- SYMCLKD_FE_EN, &fe_clk_en[3],
- SYMCLKD_FE_SRC_SEL, &be_clk_sel[3]);
- break;
- case 4:
- REG_GET_3(SYMCLKE_CLOCK_ENABLE, SYMCLKE_CLOCK_ENABLE, &be_clk_en,
- SYMCLKE_FE_EN, &fe_clk_en[4],
- SYMCLKE_FE_SRC_SEL, &be_clk_sel[4]);
- break;
- }
- if (be_clk_en) {
- /* for DPMST, this backend could be used by multiple front end.
- only disable the backend if this stream_enc_ins is the last active stream enc connected to this back_end*/
- uint8_t i;
- for (i = 0; i != link_enc_inst && i < ARRAY_SIZE(fe_clk_en); i++) {
- if (fe_clk_en[i] && be_clk_sel[i] == link_enc_inst)
- num_enabled_symclk_fe++;
- }
+ REG_GET_2(SYMCLKA_CLOCK_ENABLE, SYMCLKA_FE_EN, &fe_clk_en[0],
+ SYMCLKA_FE_SRC_SEL, &be_clk_sel[0]);
+
+ REG_GET_2(SYMCLKB_CLOCK_ENABLE, SYMCLKB_FE_EN, &fe_clk_en[1],
+ SYMCLKB_FE_SRC_SEL, &be_clk_sel[1]);
+
+ REG_GET_2(SYMCLKC_CLOCK_ENABLE, SYMCLKC_FE_EN, &fe_clk_en[2],
+ SYMCLKC_FE_SRC_SEL, &be_clk_sel[2]);
+
+ REG_GET_2(SYMCLKD_CLOCK_ENABLE, SYMCLKD_FE_EN, &fe_clk_en[3],
+ SYMCLKD_FE_SRC_SEL, &be_clk_sel[3]);
+
+ REG_GET_2(SYMCLKE_CLOCK_ENABLE, SYMCLKE_FE_EN, &fe_clk_en[4],
+ SYMCLKE_FE_SRC_SEL, &be_clk_sel[4]);
+
+ uint8_t i;
+
+ for (i = 0; i < ARRAY_SIZE(fe_clk_en); i++) {
+ if (fe_clk_en[i] && be_clk_sel[i] == link_enc_inst)
+ num_enabled_symclk_fe++;
}
return num_enabled_symclk_fe;
}
@@ -1993,9 +1978,9 @@ static void dccg35_disable_symclk_se(struct dccg *dccg, uint32_t stream_enc_inst
break;
}
- /*check other enabled symclk fe */
- num_enabled_symclk_fe = dccg35_get_other_enabled_symclk_fe(dccg, stream_enc_inst, link_enc_inst);
- /*only turn off backend clk if other front end attachecd to this backend are all off,
+ /*check other enabled symclk fe connected to this be */
+ num_enabled_symclk_fe = dccg35_get_number_enabled_symclk_fe_connected_to_be(dccg, link_enc_inst);
+ /*only turn off backend clk if other front end attached to this backend are all off,
for mst, only turn off the backend if this is the last front end*/
if (num_enabled_symclk_fe == 0) {
switch (link_enc_inst) {
--
2.46.0
More information about the amd-gfx
mailing list