[PATCH 03/28] drm/amd/display: Cleanup outdated interfaces in dcn401_clk_mgr
Roman.Li at amd.com
Roman.Li at amd.com
Fri Dec 20 21:48:30 UTC 2024
From: Dillon Varone <dillon.varone at amd.com>
[WHY&HOW]
- Remove legacy update clocks sequence
- FCLK P-State allow message is not required
Reviewed-by: Alvin Lee <alvin.lee2 at amd.com>
Signed-off-by: Dillon Varone <dillon.varone at amd.com>
Signed-off-by: Roman Li <roman.li at amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler at amd.com>
---
.../dc/clk_mgr/dcn401/dcn401_clk_mgr.c | 240 ++----------------
drivers/gpu/drm/amd/display/dc/dc.h | 1 -
2 files changed, 17 insertions(+), 224 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn401/dcn401_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn401/dcn401_clk_mgr.c
index 5b4e1e8a9ae2..e4360cd6b373 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn401/dcn401_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn401/dcn401_clk_mgr.c
@@ -628,207 +628,6 @@ static void dcn401_update_clocks_update_dentist(
}
-static void dcn401_update_clocks_legacy(struct clk_mgr *clk_mgr_base,
- struct dc_state *context,
- bool safe_to_lower)
-{
- struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
- struct dc_clocks *new_clocks = &context->bw_ctx.bw.dcn.clk;
- struct dc *dc = clk_mgr_base->ctx->dc;
- int display_count;
- bool update_dppclk = false;
- bool update_dispclk = false;
- bool enter_display_off = false;
- bool dpp_clock_lowered = false;
- struct dmcu *dmcu = clk_mgr_base->ctx->dc->res_pool->dmcu;
- bool force_reset = false;
- bool update_uclk = false, update_fclk = false;
- bool p_state_change_support;
- bool fclk_p_state_change_support;
- int total_plane_count;
-
- if (dc->work_arounds.skip_clock_update)
- return;
-
- if (clk_mgr_base->clks.dispclk_khz == 0 ||
- (dc->debug.force_clock_mode & 0x1)) {
- /* This is from resume or boot up, if forced_clock cfg option used,
- * we bypass program dispclk and DPPCLK, but need set them for S3.
- */
- force_reset = true;
-
- dcn2_read_clocks_from_hw_dentist(clk_mgr_base);
-
- /* Force_clock_mode 0x1: force reset the clock even it is the same clock
- * as long as it is in Passive level.
- */
- }
- display_count = clk_mgr_helper_get_active_display_cnt(dc, context);
-
- if (display_count == 0)
- enter_display_off = true;
-
- if (clk_mgr->smu_present) {
- if (enter_display_off == safe_to_lower)
- dcn401_smu_set_num_of_displays(clk_mgr, display_count);
-
- clk_mgr_base->clks.fclk_prev_p_state_change_support = clk_mgr_base->clks.fclk_p_state_change_support;
-
- total_plane_count = clk_mgr_helper_get_active_plane_cnt(dc, context);
- fclk_p_state_change_support = new_clocks->fclk_p_state_change_support || (total_plane_count == 0);
-
- if (should_update_pstate_support(safe_to_lower, fclk_p_state_change_support, clk_mgr_base->clks.fclk_p_state_change_support)) {
- clk_mgr_base->clks.fclk_p_state_change_support = fclk_p_state_change_support;
-
- /* To enable FCLK P-state switching, send PSTATE_SUPPORTED message to PMFW */
- if (clk_mgr_base->clks.fclk_p_state_change_support) {
- /* Handle the code for sending a message to PMFW that FCLK P-state change is supported */
- dcn401_smu_send_fclk_pstate_message(clk_mgr, true);
- }
- }
-
- if (dc->debug.force_min_dcfclk_mhz > 0)
- new_clocks->dcfclk_khz = (new_clocks->dcfclk_khz > (dc->debug.force_min_dcfclk_mhz * 1000)) ?
- new_clocks->dcfclk_khz : (dc->debug.force_min_dcfclk_mhz * 1000);
-
- if (should_set_clock(safe_to_lower, new_clocks->dcfclk_khz, clk_mgr_base->clks.dcfclk_khz)) {
- clk_mgr_base->clks.dcfclk_khz = new_clocks->dcfclk_khz;
- if (dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_DCFCLK))
- dcn401_smu_set_hard_min_by_freq(clk_mgr, PPCLK_DCFCLK, khz_to_mhz_ceil(clk_mgr_base->clks.dcfclk_khz));
- }
-
- if (should_set_clock(safe_to_lower, new_clocks->dcfclk_deep_sleep_khz, clk_mgr_base->clks.dcfclk_deep_sleep_khz)) {
- clk_mgr_base->clks.dcfclk_deep_sleep_khz = new_clocks->dcfclk_deep_sleep_khz;
- if (dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_DCFCLK))
- dcn401_smu_set_min_deep_sleep_dcef_clk(clk_mgr, khz_to_mhz_ceil(clk_mgr_base->clks.dcfclk_deep_sleep_khz));
- }
-
- if (should_set_clock(safe_to_lower, new_clocks->socclk_khz, clk_mgr_base->clks.socclk_khz))
- /* We don't actually care about socclk, don't notify SMU of hard min */
- clk_mgr_base->clks.socclk_khz = new_clocks->socclk_khz;
-
- clk_mgr_base->clks.prev_p_state_change_support = clk_mgr_base->clks.p_state_change_support;
- clk_mgr_base->clks.prev_num_ways = clk_mgr_base->clks.num_ways;
-
- if (clk_mgr_base->clks.num_ways != new_clocks->num_ways &&
- clk_mgr_base->clks.num_ways < new_clocks->num_ways) {
- clk_mgr_base->clks.num_ways = new_clocks->num_ways;
- if (dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_UCLK))
- dcn401_smu_send_cab_for_uclk_message(clk_mgr, clk_mgr_base->clks.num_ways);
- }
-
-
- p_state_change_support = new_clocks->p_state_change_support || (total_plane_count == 0);
- if (should_update_pstate_support(safe_to_lower, p_state_change_support, clk_mgr_base->clks.prev_p_state_change_support)) {
- clk_mgr_base->clks.p_state_change_support = p_state_change_support;
- clk_mgr_base->clks.fw_based_mclk_switching = p_state_change_support && new_clocks->fw_based_mclk_switching;
-
- /* to disable P-State switching, set UCLK min = max */
- if (!clk_mgr_base->clks.p_state_change_support && dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_UCLK))
- dcn401_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK,
- clk_mgr_base->bw_params->clk_table.entries[clk_mgr_base->bw_params->clk_table.num_entries_per_clk.num_memclk_levels - 1].memclk_mhz);
- }
-
- /* Always update saved value, even if new value not set due to P-State switching unsupported. Also check safe_to_lower for FCLK */
- if (safe_to_lower && (clk_mgr_base->clks.fclk_p_state_change_support != clk_mgr_base->clks.fclk_prev_p_state_change_support)) {
- update_fclk = true;
- }
-
- if (!clk_mgr_base->clks.fclk_p_state_change_support &&
- update_fclk &&
- dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_FCLK)) {
- /* Handle code for sending a message to PMFW that FCLK P-state change is not supported */
- dcn401_smu_send_fclk_pstate_message(clk_mgr, false);
- }
-
- /* Always update saved value, even if new value not set due to P-State switching unsupported */
- if (should_set_clock(safe_to_lower, new_clocks->dramclk_khz, clk_mgr_base->clks.dramclk_khz)) {
- clk_mgr_base->clks.dramclk_khz = new_clocks->dramclk_khz;
- update_uclk = true;
- }
-
- /* set UCLK to requested value if P-State switching is supported, or to re-enable P-State switching */
- if (clk_mgr_base->clks.p_state_change_support &&
- (update_uclk || !clk_mgr_base->clks.prev_p_state_change_support) &&
- dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_UCLK))
- dcn401_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, khz_to_mhz_ceil(clk_mgr_base->clks.dramclk_khz));
-
- if (clk_mgr_base->clks.num_ways != new_clocks->num_ways &&
- clk_mgr_base->clks.num_ways > new_clocks->num_ways) {
- clk_mgr_base->clks.num_ways = new_clocks->num_ways;
- if (dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_UCLK))
- dcn401_smu_send_cab_for_uclk_message(clk_mgr, clk_mgr_base->clks.num_ways);
- }
- }
-
- if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr_base->clks.dppclk_khz)) {
- if (clk_mgr_base->clks.dppclk_khz > new_clocks->dppclk_khz)
- dpp_clock_lowered = true;
-
- clk_mgr_base->clks.dppclk_khz = new_clocks->dppclk_khz;
- clk_mgr_base->clks.actual_dppclk_khz = new_clocks->dppclk_khz;
-
- if (clk_mgr->smu_present && !dpp_clock_lowered && dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_DPPCLK))
- clk_mgr_base->clks.actual_dppclk_khz = dcn401_set_hard_min_by_freq_optimized(clk_mgr, PPCLK_DPPCLK, clk_mgr_base->clks.dppclk_khz);
- update_dppclk = true;
- }
-
- if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) {
- clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz;
-
- if (clk_mgr->smu_present && dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_DISPCLK))
- clk_mgr_base->clks.actual_dispclk_khz = dcn401_set_hard_min_by_freq_optimized(clk_mgr, PPCLK_DISPCLK, clk_mgr_base->clks.dispclk_khz);
-
- update_dispclk = true;
- }
-
- if (!new_clocks->dtbclk_en && dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_DTBCLK)) {
- new_clocks->ref_dtbclk_khz = clk_mgr_base->bw_params->clk_table.entries[0].dtbclk_mhz * 1000;
- }
-
- /* clock limits are received with MHz precision, divide by 1000 to prevent setting clocks at every call */
- if (!dc->debug.disable_dtb_ref_clk_switch &&
- should_set_clock(safe_to_lower, new_clocks->ref_dtbclk_khz / 1000, clk_mgr_base->clks.ref_dtbclk_khz / 1000) &&
- dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_DTBCLK)) {
- /* DCCG requires KHz precision for DTBCLK */
- clk_mgr_base->clks.ref_dtbclk_khz =
- dcn401_smu_set_hard_min_by_freq(clk_mgr, PPCLK_DTBCLK, khz_to_mhz_ceil(new_clocks->ref_dtbclk_khz));
-
- dcn401_update_clocks_update_dtb_dto(clk_mgr, context, clk_mgr_base->clks.ref_dtbclk_khz);
- }
-
- if (dc->config.forced_clocks == false || (force_reset && safe_to_lower)) {
- if (dpp_clock_lowered) {
- /* if clock is being lowered, increase DTO before lowering refclk */
- dcn401_update_clocks_update_dpp_dto(clk_mgr, context,
- safe_to_lower, clk_mgr_base->clks.dppclk_khz);
- dcn401_update_clocks_update_dentist(clk_mgr, context);
- if (clk_mgr->smu_present && dcn401_is_ppclk_dpm_enabled(clk_mgr, PPCLK_DPPCLK)) {
- clk_mgr_base->clks.actual_dppclk_khz = dcn401_set_hard_min_by_freq_optimized(clk_mgr, PPCLK_DPPCLK,
- clk_mgr_base->clks.dppclk_khz);
- dcn401_update_clocks_update_dpp_dto(clk_mgr, context, safe_to_lower,
- clk_mgr_base->clks.actual_dppclk_khz);
- }
-
- } else {
- /* if clock is being raised, increase refclk before lowering DTO */
- if (update_dppclk || update_dispclk)
- dcn401_update_clocks_update_dentist(clk_mgr, context);
- /* There is a check inside dcn20_update_clocks_update_dpp_dto which ensures
- * that we do not lower dto when it is not safe to lower. We do not need to
- * compare the current and new dppclk before calling this function.
- */
- dcn401_update_clocks_update_dpp_dto(clk_mgr, context,
- safe_to_lower, clk_mgr_base->clks.actual_dppclk_khz);
- }
- }
-
- if (update_dispclk && dmcu && dmcu->funcs->is_dmcu_initialized(dmcu))
- /*update dmcu for wait_loop count*/
- dmcu->funcs->set_psr_wait_loop(dmcu,
- clk_mgr_base->clks.dispclk_khz / 1000 / 7);
-}
-
static void dcn401_execute_block_sequence(struct clk_mgr *clk_mgr_base, unsigned int num_steps)
{
struct clk_mgr_internal *clk_mgr_internal = TO_CLK_MGR_INTERNAL(clk_mgr_base);
@@ -1008,15 +807,15 @@ static unsigned int dcn401_build_update_bandwidth_clocks_sequence(
update_active_fclk = true;
update_idle_fclk = true;
- /* To enable FCLK P-state switching, send PSTATE_SUPPORTED message to PMFW */
- if (clk_mgr_base->clks.fclk_p_state_change_support) {
- /* Handle the code for sending a message to PMFW that FCLK P-state change is supported */
- if (dcn401_is_ppclk_dpm_enabled(clk_mgr_internal, PPCLK_FCLK)) {
- block_sequence[num_steps].params.update_pstate_support_params.support = true;
- block_sequence[num_steps].func = CLK_MGR401_UPDATE_FCLK_PSTATE_SUPPORT;
- num_steps++;
- }
- }
+ /* To enable FCLK P-state switching, send PSTATE_SUPPORTED message to PMFW (message not supported on DCN401)*/
+ // if (clk_mgr_base->clks.fclk_p_state_change_support) {
+ // /* Handle the code for sending a message to PMFW that FCLK P-state change is supported */
+ // if (dcn401_is_ppclk_dpm_enabled(clk_mgr_internal, PPCLK_FCLK)) {
+ // block_sequence[num_steps].params.update_pstate_support_params.support = true;
+ // block_sequence[num_steps].func = CLK_MGR401_UPDATE_FCLK_PSTATE_SUPPORT;
+ // num_steps++;
+ // }
+ // }
}
if (!clk_mgr_base->clks.fclk_p_state_change_support && dcn401_is_ppclk_dpm_enabled(clk_mgr_internal, PPCLK_FCLK)) {
@@ -1224,14 +1023,14 @@ static unsigned int dcn401_build_update_bandwidth_clocks_sequence(
// (*num_steps)++;
// }
- /* disable FCLK P-State support if needed */
- if (!fclk_p_state_change_support &&
- should_update_pstate_support(safe_to_lower, fclk_p_state_change_support, clk_mgr_base->clks.fclk_prev_p_state_change_support) &&
- dcn401_is_ppclk_dpm_enabled(clk_mgr_internal, PPCLK_FCLK)) {
- block_sequence[num_steps].params.update_pstate_support_params.support = false;
- block_sequence[num_steps].func = CLK_MGR401_UPDATE_FCLK_PSTATE_SUPPORT;
- num_steps++;
- }
+ /* disable FCLK P-State support if needed (message not supported on DCN401)*/
+ // if (!fclk_p_state_change_support &&
+ // should_update_pstate_support(safe_to_lower, fclk_p_state_change_support, clk_mgr_base->clks.fclk_prev_p_state_change_support) &&
+ // dcn401_is_ppclk_dpm_enabled(clk_mgr_internal, PPCLK_FCLK)) {
+ // block_sequence[num_steps].params.update_pstate_support_params.support = false;
+ // block_sequence[num_steps].func = CLK_MGR401_UPDATE_FCLK_PSTATE_SUPPORT;
+ // num_steps++;
+ // }
}
if (new_clocks->fw_based_mclk_switching != clk_mgr_base->clks.fw_based_mclk_switching &&
@@ -1412,11 +1211,6 @@ static void dcn401_update_clocks(struct clk_mgr *clk_mgr_base,
unsigned int num_steps = 0;
- if (dc->debug.enable_legacy_clock_update) {
- dcn401_update_clocks_legacy(clk_mgr_base, context, safe_to_lower);
- return;
- }
-
/* build bandwidth related clocks update sequence */
num_steps = dcn401_build_update_bandwidth_clocks_sequence(clk_mgr_base,
context,
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 8c6347413038..cccffffaf768 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -1060,7 +1060,6 @@ struct dc_debug_options {
uint32_t dml21_disable_pstate_method_mask;
union fw_assisted_mclk_switch_version fams_version;
union dmub_fams2_global_feature_config fams2_config;
- bool enable_legacy_clock_update;
unsigned int force_cositing;
unsigned int disable_spl;
unsigned int force_easf;
--
2.34.1
More information about the amd-gfx
mailing list