[PATCH] drm/amdgpu: Improve error checking in amdgpu_virt_rlcg_reg_rw (v2)

[Victor Lu]

The current error detection only looks for a timeout.
This should be changed to also check scratch_reg1 for any errors
returned from RLCG.

v2: remove new error value

Signed-off-by: Victor Lu <victorchengchi.lu at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 5 +++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h | 1 +
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
index 6ff7d3fb2008..7a4eae36778a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c
@@ -979,7 +979,7 @@ u32 amdgpu_virt_rlcg_reg_rw(struct amdgpu_device *adev, u32 offset, u32 v, u32 f
 		 * SCRATCH_REG0 	= read/write value
 		 * SCRATCH_REG1[30:28]	= command
 		 * SCRATCH_REG1[19:0]	= address in dword
-		 * SCRATCH_REG1[26:24]	= Error reporting
+		 * SCRATCH_REG1[27:24]	= Error reporting
 		 */
 		writel(v, scratch_reg0);
 		writel((offset | flag), scratch_reg1);
@@ -993,7 +993,8 @@ u32 amdgpu_virt_rlcg_reg_rw(struct amdgpu_device *adev, u32 offset, u32 v, u32 f
 			udelay(10);
 		}
 
-		if (i >= timeout) {
+		tmp = readl(scratch_reg1);
+		if (i >= timeout || (tmp & AMDGPU_RLCG_SCRATCH1_ERROR_MASK) != 0) {
 			if (amdgpu_sriov_rlcg_error_report_enabled(adev)) {
 				if (tmp & AMDGPU_RLCG_VFGATE_DISABLED) {
 					dev_err(adev->dev,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
index fa7be5f277b9..3f59b7b5523f 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h
@@ -45,6 +45,7 @@
 #define AMDGPU_RLCG_REG_NOT_IN_RANGE		0x1000000
 
 #define AMDGPU_RLCG_SCRATCH1_ADDRESS_MASK	0xFFFFF
+#define AMDGPU_RLCG_SCRATCH1_ERROR_MASK	0xF000000
 
 /* all asic after AI use this offset */
 #define mmRCC_IOV_FUNC_IDENTIFIER 0xDE5
-- 
2.34.1