[PATCH 06/10] drm/amd/display: Request usb4 bw for mst streams
Rodrigo Siqueira
Rodrigo.Siqueira at amd.com
Thu Jan 4 15:51:02 UTC 2024
From: Peichen Huang <peichen.huang at amd.com>
[WHY]
When usb4 bandwidth allocation mode is enabled, driver need to request
bandwidth from connection manager. For mst link, the requested
bandwidth should be big enough for all remote streams.
[HOW]
- If mst link, the requested bandwidth should be the sum of all mst
streams bandwidth added with dp MTPH overhead.
- Allocate/deallcate usb4 bandwidth when setting dpms on/off.
- When doing display mode validation, driver also need to consider total
bandwidth of all mst streams for mst link.
Reviewed-by: Cruise Hung <cruise.hung at amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira at amd.com>
Signed-off-by: Peichen Huang <peichen.huang at amd.com>
---
drivers/gpu/drm/amd/display/dc/dc_types.h | 12 ++--
.../gpu/drm/amd/display/dc/link/link_dpms.c | 42 ++++++++++---
.../drm/amd/display/dc/link/link_validation.c | 60 +++++++++++++++----
.../dc/link/protocols/link_dp_dpia_bw.c | 59 +++++++++++++-----
.../dc/link/protocols/link_dp_dpia_bw.h | 9 +++
5 files changed, 144 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dc_types.h b/drivers/gpu/drm/amd/display/dc/dc_types.h
index 4f276169e05a..b08ccb8c68bc 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_types.h
@@ -1140,23 +1140,25 @@ struct dc_panel_config {
} ilr;
};
+#define MAX_SINKS_PER_LINK 4
+
/*
* USB4 DPIA BW ALLOCATION STRUCTS
*/
struct dc_dpia_bw_alloc {
- int sink_verified_bw; // The Verified BW that sink can allocated and use that has been verified already
- int sink_allocated_bw; // The Actual Allocated BW that sink currently allocated
- int sink_max_bw; // The Max BW that sink can require/support
+ int remote_sink_req_bw[MAX_SINKS_PER_LINK]; // BW requested by remote sinks
+ int link_verified_bw; // The Verified BW that link can allocated and use that has been verified already
+ int link_max_bw; // The Max BW that link can require/support
+ int allocated_bw; // The Actual Allocated BW for this DPIA
int estimated_bw; // The estimated available BW for this DPIA
int bw_granularity; // BW Granularity
+ int dp_overhead; // DP overhead in dp tunneling
bool bw_alloc_enabled; // The BW Alloc Mode Support is turned ON for all 3: DP-Tx & Dpia & CM
bool response_ready; // Response ready from the CM side
uint8_t nrd_max_lane_count; // Non-reduced max lane count
uint8_t nrd_max_link_rate; // Non-reduced max link rate
};
-#define MAX_SINKS_PER_LINK 4
-
enum dc_hpd_enable_select {
HPD_EN_FOR_ALL_EDP = 0,
HPD_EN_FOR_PRIMARY_EDP_ONLY,
diff --git a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c
index 5fe8b4871c77..3de148004c06 100644
--- a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c
+++ b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c
@@ -2005,17 +2005,11 @@ static enum dc_status enable_link_dp(struct dc_state *state,
}
}
- /*
- * If the link is DP-over-USB4 do the following:
- * - Train with fallback when enabling DPIA link. Conventional links are
+ /* Train with fallback when enabling DPIA link. Conventional links are
* trained with fallback during sink detection.
- * - Allocate only what the stream needs for bw in Gbps. Inform the CM
- * in case stream needs more or less bw from what has been allocated
- * earlier at plug time.
*/
- if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) {
+ if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA)
do_fallback = true;
- }
/*
* Temporary w/a to get DP2.0 link rates to work with SST.
@@ -2197,6 +2191,32 @@ static enum dc_status enable_link(
return status;
}
+static bool allocate_usb4_bandwidth_for_stream(struct dc_stream_state *stream, int bw)
+{
+ return true;
+}
+
+static bool allocate_usb4_bandwidth(struct dc_stream_state *stream)
+{
+ bool ret;
+
+ int bw = dc_bandwidth_in_kbps_from_timing(&stream->timing,
+ dc_link_get_highest_encoding_format(stream->sink->link));
+
+ ret = allocate_usb4_bandwidth_for_stream(stream, bw);
+
+ return ret;
+}
+
+static bool deallocate_usb4_bandwidth(struct dc_stream_state *stream)
+{
+ bool ret;
+
+ ret = allocate_usb4_bandwidth_for_stream(stream, 0);
+
+ return ret;
+}
+
void link_set_dpms_off(struct pipe_ctx *pipe_ctx)
{
struct dc *dc = pipe_ctx->stream->ctx->dc;
@@ -2232,6 +2252,9 @@ void link_set_dpms_off(struct pipe_ctx *pipe_ctx)
update_psp_stream_config(pipe_ctx, true);
dc->hwss.blank_stream(pipe_ctx);
+ if (pipe_ctx->stream->link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA)
+ deallocate_usb4_bandwidth(pipe_ctx->stream);
+
if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST)
deallocate_mst_payload(pipe_ctx);
else if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT &&
@@ -2474,6 +2497,9 @@ void link_set_dpms_on(
}
}
+ if (pipe_ctx->stream->link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA)
+ allocate_usb4_bandwidth(pipe_ctx->stream);
+
if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST)
allocate_mst_payload(pipe_ctx);
else if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT &&
diff --git a/drivers/gpu/drm/amd/display/dc/link/link_validation.c b/drivers/gpu/drm/amd/display/dc/link/link_validation.c
index b45fda96eaf6..8fe66c367850 100644
--- a/drivers/gpu/drm/amd/display/dc/link/link_validation.c
+++ b/drivers/gpu/drm/amd/display/dc/link/link_validation.c
@@ -346,23 +346,61 @@ enum dc_status link_validate_mode_timing(
return DC_OK;
}
+/*
+ * This function calculates the bandwidth required for the stream timing
+ * and aggregates the stream bandwidth for the respective dpia link
+ *
+ * @stream: pointer to the dc_stream_state struct instance
+ * @num_streams: number of streams to be validated
+ *
+ * return: true if validation is succeeded
+ */
bool link_validate_dpia_bandwidth(const struct dc_stream_state *stream, const unsigned int num_streams)
{
- bool ret = true;
- int bw_needed[MAX_DPIA_NUM];
- struct dc_link *link[MAX_DPIA_NUM];
-
- if (!num_streams || num_streams > MAX_DPIA_NUM)
- return ret;
+ int bw_needed[MAX_DPIA_NUM] = {0};
+ struct dc_link *dpia_link[MAX_DPIA_NUM] = {0};
+ int num_dpias = 0;
for (uint8_t i = 0; i < num_streams; ++i) {
+ if (stream[i].signal == SIGNAL_TYPE_DISPLAY_PORT) {
+ /* new dpia sst stream, check whether it exceeds max dpia */
+ if (num_dpias >= MAX_DPIA_NUM)
+ return false;
- link[i] = stream[i].link;
- bw_needed[i] = dc_bandwidth_in_kbps_from_timing(&stream[i].timing,
- dc_link_get_highest_encoding_format(link[i]));
+ dpia_link[num_dpias] = stream[i].link;
+ bw_needed[num_dpias] = dc_bandwidth_in_kbps_from_timing(&stream[i].timing,
+ dc_link_get_highest_encoding_format(dpia_link[num_dpias]));
+ num_dpias++;
+ } else if (stream[i].signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
+ uint8_t j = 0;
+ /* check whether its a known dpia link */
+ for (; j < num_dpias; ++j) {
+ if (dpia_link[j] == stream[i].link)
+ break;
+ }
+
+ if (j == num_dpias) {
+ /* new dpia mst stream, check whether it exceeds max dpia */
+ if (num_dpias >= MAX_DPIA_NUM)
+ return false;
+ else {
+ dpia_link[j] = stream[i].link;
+ num_dpias++;
+ }
+ }
+
+ bw_needed[j] += dc_bandwidth_in_kbps_from_timing(&stream[i].timing,
+ dc_link_get_highest_encoding_format(dpia_link[j]));
+ }
}
- ret = dpia_validate_usb4_bw(link, bw_needed, num_streams);
+ /* Include dp overheads */
+ for (uint8_t i = 0; i < num_dpias; ++i) {
+ int dp_overhead = 0;
+
+ dp_overhead = link_dp_dpia_get_dp_overhead_in_dp_tunneling(dpia_link[i]);
+ bw_needed[i] += dp_overhead;
+ }
- return ret;
+ return dpia_validate_usb4_bw(dpia_link, bw_needed, num_dpias);
}
diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c
index a7aa8c9da868..4ef1a6a1d129 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c
@@ -54,12 +54,18 @@ static bool get_bw_alloc_proceed_flag(struct dc_link *tmp)
static void reset_bw_alloc_struct(struct dc_link *link)
{
link->dpia_bw_alloc_config.bw_alloc_enabled = false;
- link->dpia_bw_alloc_config.sink_verified_bw = 0;
- link->dpia_bw_alloc_config.sink_max_bw = 0;
+ link->dpia_bw_alloc_config.link_verified_bw = 0;
+ link->dpia_bw_alloc_config.link_max_bw = 0;
+ link->dpia_bw_alloc_config.allocated_bw = 0;
link->dpia_bw_alloc_config.estimated_bw = 0;
link->dpia_bw_alloc_config.bw_granularity = 0;
+ link->dpia_bw_alloc_config.dp_overhead = 0;
link->dpia_bw_alloc_config.response_ready = false;
- link->dpia_bw_alloc_config.sink_allocated_bw = 0;
+ link->dpia_bw_alloc_config.nrd_max_lane_count = 0;
+ link->dpia_bw_alloc_config.nrd_max_link_rate = 0;
+ for (int i = 0; i < MAX_SINKS_PER_LINK; i++)
+ link->dpia_bw_alloc_config.remote_sink_req_bw[i] = 0;
+ DC_LOG_DEBUG("reset usb4 bw alloc of link(%d)\n", link->link_index);
}
#define BW_GRANULARITY_0 4 // 0.25 Gbps
@@ -210,8 +216,8 @@ static int get_host_router_total_dp_tunnel_bw(const struct dc *dc, uint8_t hr_in
link_dpia_primary->dpia_bw_alloc_config.bw_alloc_enabled) &&
(link_dpia_secondary->hpd_status &&
link_dpia_secondary->dpia_bw_alloc_config.bw_alloc_enabled)) {
- total_bw += link_dpia_primary->dpia_bw_alloc_config.estimated_bw +
- link_dpia_secondary->dpia_bw_alloc_config.sink_allocated_bw;
+ total_bw += link_dpia_primary->dpia_bw_alloc_config.estimated_bw +
+ link_dpia_secondary->dpia_bw_alloc_config.allocated_bw;
} else if (link_dpia_primary->hpd_status &&
link_dpia_primary->dpia_bw_alloc_config.bw_alloc_enabled) {
total_bw = link_dpia_primary->dpia_bw_alloc_config.estimated_bw;
@@ -264,7 +270,7 @@ static void set_usb4_req_bw_req(struct dc_link *link, int req_bw)
/* Error check whether requested and allocated are equal */
req_bw = requested_bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity);
- if (req_bw == link->dpia_bw_alloc_config.sink_allocated_bw) {
+ if (req_bw == link->dpia_bw_alloc_config.allocated_bw) {
DC_LOG_ERROR("%s: Request bw equals to allocated bw for link(%d)\n",
__func__, link->link_index);
}
@@ -387,9 +393,9 @@ void dpia_handle_bw_alloc_response(struct dc_link *link, uint8_t bw, uint8_t res
DC_LOG_DEBUG("%s: BW REQ SUCCESS for DP-TX Request for link(%d)\n",
__func__, link->link_index);
DC_LOG_DEBUG("%s: current allocated_bw(%d), new allocated_bw(%d)\n",
- __func__, link->dpia_bw_alloc_config.sink_allocated_bw, bw_needed);
+ __func__, link->dpia_bw_alloc_config.allocated_bw, bw_needed);
- link->dpia_bw_alloc_config.sink_allocated_bw = bw_needed;
+ link->dpia_bw_alloc_config.allocated_bw = bw_needed;
link->dpia_bw_alloc_config.response_ready = true;
break;
@@ -427,8 +433,8 @@ int dpia_handle_usb4_bandwidth_allocation_for_link(struct dc_link *link, int pea
if (link->hpd_status && peak_bw > 0) {
// If DP over USB4 then we need to check BW allocation
- link->dpia_bw_alloc_config.sink_max_bw = peak_bw;
- set_usb4_req_bw_req(link, link->dpia_bw_alloc_config.sink_max_bw);
+ link->dpia_bw_alloc_config.link_max_bw = peak_bw;
+ set_usb4_req_bw_req(link, link->dpia_bw_alloc_config.link_max_bw);
do {
if (timeout > 0)
@@ -440,8 +446,8 @@ int dpia_handle_usb4_bandwidth_allocation_for_link(struct dc_link *link, int pea
if (!timeout)
ret = 0;// ERROR TIMEOUT waiting for response for allocating bw
- else if (link->dpia_bw_alloc_config.sink_allocated_bw > 0)
- ret = link->dpia_bw_alloc_config.sink_allocated_bw;
+ else if (link->dpia_bw_alloc_config.allocated_bw > 0)
+ ret = link->dpia_bw_alloc_config.allocated_bw;
}
//2. Cold Unplug
else if (!link->hpd_status)
@@ -450,7 +456,6 @@ int dpia_handle_usb4_bandwidth_allocation_for_link(struct dc_link *link, int pea
out:
return ret;
}
-
bool link_dp_dpia_allocate_usb4_bandwidth_for_stream(struct dc_link *link, int req_bw)
{
bool ret = false;
@@ -458,7 +463,7 @@ bool link_dp_dpia_allocate_usb4_bandwidth_for_stream(struct dc_link *link, int r
DC_LOG_DEBUG("%s: ENTER: link(%d), hpd_status(%d), current allocated_bw(%d), req_bw(%d)\n",
__func__, link->link_index, link->hpd_status,
- link->dpia_bw_alloc_config.sink_allocated_bw, req_bw);
+ link->dpia_bw_alloc_config.allocated_bw, req_bw);
if (!get_bw_alloc_proceed_flag(link))
goto out;
@@ -523,3 +528,29 @@ bool dpia_validate_usb4_bw(struct dc_link **link, int *bw_needed_per_dpia, const
return ret;
}
+
+int link_dp_dpia_get_dp_overhead_in_dp_tunneling(struct dc_link *link)
+{
+ int dp_overhead = 0, link_mst_overhead = 0;
+
+ if (!get_bw_alloc_proceed_flag((link)))
+ return dp_overhead;
+
+ /* if its mst link, add MTPH overhead */
+ if ((link->type == dc_connection_mst_branch) &&
+ !link->dpcd_caps.channel_coding_cap.bits.DP_128b_132b_SUPPORTED) {
+ /* For 8b/10b encoding: MTP is 64 time slots long, slot 0 is used for MTPH
+ * MST overhead is 1/64 of link bandwidth (excluding any overhead)
+ */
+ const struct dc_link_settings *link_cap =
+ dc_link_get_link_cap(link);
+ uint32_t link_bw_in_kbps =
+ link_cap->link_rate * link_cap->lane_count * LINK_RATE_REF_FREQ_IN_KHZ * 8;
+ link_mst_overhead = (link_bw_in_kbps / 64) + ((link_bw_in_kbps % 64) ? 1 : 0);
+ }
+
+ /* add all the overheads */
+ dp_overhead = link_mst_overhead;
+
+ return dp_overhead;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h
index 981bc4eb6120..3b6d8494f9d5 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h
@@ -99,4 +99,13 @@ void dpia_handle_bw_alloc_response(struct dc_link *link, uint8_t bw, uint8_t res
*/
bool dpia_validate_usb4_bw(struct dc_link **link, int *bw_needed, const unsigned int num_dpias);
+/*
+ * Obtain all the DP overheads in dp tunneling for the dpia link
+ *
+ * @link: pointer to the dc_link struct instance
+ *
+ * return: DP overheads in DP tunneling
+ */
+int link_dp_dpia_get_dp_overhead_in_dp_tunneling(struct dc_link *link);
+
#endif /* DC_INC_LINK_DP_DPIA_BW_H_ */
--
2.43.0
More information about the amd-gfx
mailing list