[PATCH v2] drm/amdgpu: move the drm client creation behind drm device registration

Lazar, Lijo lijo.lazar at amd.com
Thu Jan 25 13:15:43 UTC 2024



On 1/25/2024 1:37 PM, Le Ma wrote:
> This patch is to eliminate interrupt warning below:
> 
>   "[drm] Fence fallback timer expired on ring sdma0.0".
> 
> An early vm pt clearing job is sent to SDMA ahead of interrupt enabled,
> introduced by patch below:
> 
>   - drm/amdkfd: Export DMABufs from KFD using GEM handles
> 
The drm client creation logic in this patch won't work well for dynamic
partition switch cases. Better add a ''Fixes' tag also.

This looks fine to me, needs to be checked by Felix anyway.

Thanks,
Lijo

> And re-locating the drm client creation following after drm_dev_register
> looks like a more proper flow.
> 
> v2: wrap the drm client creation
> 
> Signed-off-by: Le Ma <le.ma at amd.com>
> ---
>  drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c | 32 ++++++++++++++--------
>  drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h |  2 ++
>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c    |  4 +++
>  3 files changed, 27 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
> index 77e263660288..41db030ddc4e 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
> @@ -141,11 +141,31 @@ static void amdgpu_amdkfd_reset_work(struct work_struct *work)
>  static const struct drm_client_funcs kfd_client_funcs = {
>  	.unregister	= drm_client_release,
>  };
> +
> +int amdgpu_amdkfd_drm_client_create(struct amdgpu_device *adev)
> +{
> +	int ret;
> +
> +	if (!adev->kfd.init_complete)
> +		return 0;
> +
> +	ret = drm_client_init(&adev->ddev, &adev->kfd.client, "kfd",
> +			      &kfd_client_funcs);
> +	if (ret) {
> +		dev_err(adev->dev, "Failed to init DRM client: %d\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	drm_client_register(&adev->kfd.client);
> +
> +	return 0;
> +}
> +
>  void amdgpu_amdkfd_device_init(struct amdgpu_device *adev)
>  {
>  	int i;
>  	int last_valid_bit;
> -	int ret;
>  
>  	amdgpu_amdkfd_gpuvm_init_mem_limits();
>  
> @@ -164,12 +184,6 @@ void amdgpu_amdkfd_device_init(struct amdgpu_device *adev)
>  			.enable_mes = adev->enable_mes,
>  		};
>  
> -		ret = drm_client_init(&adev->ddev, &adev->kfd.client, "kfd", &kfd_client_funcs);
> -		if (ret) {
> -			dev_err(adev->dev, "Failed to init DRM client: %d\n", ret);
> -			return;
> -		}
> -
>  		/* this is going to have a few of the MSBs set that we need to
>  		 * clear
>  		 */
> @@ -208,10 +222,6 @@ void amdgpu_amdkfd_device_init(struct amdgpu_device *adev)
>  
>  		adev->kfd.init_complete = kgd2kfd_device_init(adev->kfd.dev,
>  							&gpu_resources);
> -		if (adev->kfd.init_complete)
> -			drm_client_register(&adev->kfd.client);
> -		else
> -			drm_client_release(&adev->kfd.client);
>  
>  		amdgpu_amdkfd_total_mem_size += adev->gmc.real_vram_size;
>  
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
> index 584a0cea5572..da175c384adf 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
> @@ -182,6 +182,8 @@ int amdgpu_queue_mask_bit_to_set_resource_bit(struct amdgpu_device *adev,
>  struct amdgpu_amdkfd_fence *amdgpu_amdkfd_fence_create(u64 context,
>  				struct mm_struct *mm,
>  				struct svm_range_bo *svm_bo);
> +
> +int amdgpu_amdkfd_drm_client_create(struct amdgpu_device *adev);
>  #if defined(CONFIG_DEBUG_FS)
>  int kfd_debugfs_kfd_mem_limits(struct seq_file *m, void *data);
>  #endif
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index 475bd59c9ac2..91d5d9435067 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -2255,6 +2255,10 @@ static int amdgpu_pci_probe(struct pci_dev *pdev,
>  	if (ret)
>  		goto err_pci;
>  
> +	ret = amdgpu_amdkfd_drm_client_create(adev);
> +	if (ret)
> +		goto err_pci;
> +
>  	/*
>  	 * 1. don't init fbdev on hw without DCE
>  	 * 2. don't init fbdev if there are no connectors


More information about the amd-gfx mailing list