[PATCH 32/39] drm/amd/display: For FAMS2 don't program P-State force from driver

[Rodrigo Siqueira]

From: Alvin Lee <Alvin.Lee2 at amd.com>

P-State force programming is handled entirely by FW in FAMS2.  Remove
any programming from driver side to prevent incorrect programming from
driver side (which may override FW programming)

Signed-off-by: Alvin Lee <Alvin.Lee2 at amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
---
 drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c | 1 -
 drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_init.c | 1 -
 2 files changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c b/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c
index 846c183fe3a8..b1ebf5053b4f 100644
--- a/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c
+++ b/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c
@@ -990,7 +990,6 @@ static struct hubp_funcs dcn401_hubp_funcs = {
 	.hubp_soft_reset = hubp31_soft_reset,
 	.hubp_set_flip_int = hubp401_set_flip_int,
 	.hubp_in_blank = hubp401_in_blank,
-	.hubp_update_force_pstate_disallow = hubp32_update_force_pstate_disallow,
 	.phantom_hubp_post_enable = hubp32_phantom_hubp_post_enable,
 	.hubp_update_mall_sel = hubp401_update_mall_sel,
 	.hubp_prepare_subvp_buffering = hubp32_prepare_subvp_buffering,
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_init.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_init.c
index 2533f16510ba..457f4167e848 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_init.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_init.c
@@ -132,7 +132,6 @@ static const struct hwseq_private_funcs dcn401_private_funcs = {
 	.dccg_init = dcn20_dccg_init,
 	.set_mcm_luts = dcn401_set_mcm_luts,
 	.program_mall_pipe_config = dcn32_program_mall_pipe_config,
-	.update_force_pstate = dcn32_update_force_pstate,
 	.update_mall_sel = dcn32_update_mall_sel,
 	.calculate_dccg_k1_k2_values = NULL,
 	.apply_single_controller_ctx_to_hw = dce110_apply_single_controller_ctx_to_hw,
-- 
2.43.0