[PATCH] drm/amd/pm: add overdrive support on smu v14.0.2/3
Kenneth Feng
kenneth.feng at amd.com
Tue Jul 30 01:44:51 UTC 2024
add overdrive support on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng at amd.com>
---
.../gpu/drm/amd/pm/swsmu/smu14/smu_v14_0.c | 11 +-
.../drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c | 888 +++++++++++++++++-
2 files changed, 896 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0.c
index 09973615f210..865e916fc425 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0.c
@@ -452,17 +452,26 @@ int smu_v14_0_init_smc_tables(struct smu_context *smu)
ret = -ENOMEM;
goto err3_out;
}
+
+ smu_table->user_overdrive_table =
+ kzalloc(tables[SMU_TABLE_OVERDRIVE].size, GFP_KERNEL);
+ if (!smu_table->user_overdrive_table) {
+ ret = -ENOMEM;
+ goto err4_out;
+ }
}
smu_table->combo_pptable =
kzalloc(tables[SMU_TABLE_COMBO_PPTABLE].size, GFP_KERNEL);
if (!smu_table->combo_pptable) {
ret = -ENOMEM;
- goto err4_out;
+ goto err5_out;
}
return 0;
+err5_out:
+ kfree(smu_table->user_overdrive_table);
err4_out:
kfree(smu_table->boot_overdrive_table);
err3_out:
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c
index e1a27903c80a..85cf450d4df1 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c
@@ -68,6 +68,18 @@
#define DEBUGSMC_MSG_Mode1Reset 2
#define LINK_SPEED_MAX 3
+#define PP_OD_FEATURE_GFXCLK_FMIN 0
+#define PP_OD_FEATURE_GFXCLK_FMAX 1
+#define PP_OD_FEATURE_UCLK_FMIN 2
+#define PP_OD_FEATURE_UCLK_FMAX 3
+#define PP_OD_FEATURE_GFX_VF_CURVE 4
+#define PP_OD_FEATURE_FAN_CURVE_TEMP 5
+#define PP_OD_FEATURE_FAN_CURVE_PWM 6
+#define PP_OD_FEATURE_FAN_ACOUSTIC_LIMIT 7
+#define PP_OD_FEATURE_FAN_ACOUSTIC_TARGET 8
+#define PP_OD_FEATURE_FAN_TARGET_TEMPERATURE 9
+#define PP_OD_FEATURE_FAN_MINIMUM_PWM 10
+
static struct cmn2asic_msg_mapping smu_v14_0_2_message_map[SMU_MSG_MAX_COUNT] = {
MSG_MAP(TestMessage, PPSMC_MSG_TestMessage, 1),
MSG_MAP(GetSmuVersion, PPSMC_MSG_GetSmuVersion, 1),
@@ -204,6 +216,7 @@ static struct cmn2asic_mapping smu_v14_0_2_table_map[SMU_TABLE_COUNT] = {
[SMU_TABLE_COMBO_PPTABLE] = {1, TABLE_COMBO_PPTABLE},
TAB_MAP(I2C_COMMANDS),
TAB_MAP(ECCINFO),
+ TAB_MAP(OVERDRIVE),
};
static struct cmn2asic_mapping smu_v14_0_2_pwr_src_map[SMU_POWER_SOURCE_COUNT] = {
@@ -1029,16 +1042,97 @@ static int smu_v14_0_2_get_current_clk_freq_by_table(struct smu_context *smu,
value);
}
+static bool smu_v14_0_2_is_od_feature_supported(struct smu_context *smu,
+ int od_feature_bit)
+{
+ PPTable_t *pptable = smu->smu_table.driver_pptable;
+ const OverDriveLimits_t * const overdrive_upperlimits =
+ &pptable->SkuTable.OverDriveLimitsBasicMax;
+
+ return overdrive_upperlimits->FeatureCtrlMask & (1U << od_feature_bit);
+}
+
+static void smu_v14_0_2_get_od_setting_limits(struct smu_context *smu,
+ int od_feature_bit,
+ int32_t *min,
+ int32_t *max)
+{
+ PPTable_t *pptable = smu->smu_table.driver_pptable;
+ const OverDriveLimits_t * const overdrive_upperlimits =
+ &pptable->SkuTable.OverDriveLimitsBasicMax;
+ const OverDriveLimits_t * const overdrive_lowerlimits =
+ &pptable->SkuTable.OverDriveLimitsBasicMin;
+ int32_t od_min_setting, od_max_setting;
+
+ switch (od_feature_bit) {
+ case PP_OD_FEATURE_GFXCLK_FMIN:
+ od_min_setting = overdrive_lowerlimits->GfxclkFmin;
+ od_max_setting = overdrive_upperlimits->GfxclkFmin;
+ break;
+ case PP_OD_FEATURE_GFXCLK_FMAX:
+ od_min_setting = overdrive_lowerlimits->GfxclkFmax;
+ od_max_setting = overdrive_upperlimits->GfxclkFmax;
+ break;
+ case PP_OD_FEATURE_UCLK_FMIN:
+ od_min_setting = overdrive_lowerlimits->UclkFmin;
+ od_max_setting = overdrive_upperlimits->UclkFmin;
+ break;
+ case PP_OD_FEATURE_UCLK_FMAX:
+ od_min_setting = overdrive_lowerlimits->UclkFmax;
+ od_max_setting = overdrive_upperlimits->UclkFmax;
+ break;
+ case PP_OD_FEATURE_GFX_VF_CURVE:
+ od_min_setting = overdrive_lowerlimits->VoltageOffsetPerZoneBoundary[0];
+ od_max_setting = overdrive_upperlimits->VoltageOffsetPerZoneBoundary[0];
+ break;
+ case PP_OD_FEATURE_FAN_CURVE_TEMP:
+ od_min_setting = overdrive_lowerlimits->FanLinearTempPoints[0];
+ od_max_setting = overdrive_upperlimits->FanLinearTempPoints[0];
+ break;
+ case PP_OD_FEATURE_FAN_CURVE_PWM:
+ od_min_setting = overdrive_lowerlimits->FanLinearPwmPoints[0];
+ od_max_setting = overdrive_upperlimits->FanLinearPwmPoints[0];
+ break;
+ case PP_OD_FEATURE_FAN_ACOUSTIC_LIMIT:
+ od_min_setting = overdrive_lowerlimits->AcousticLimitRpmThreshold;
+ od_max_setting = overdrive_upperlimits->AcousticLimitRpmThreshold;
+ break;
+ case PP_OD_FEATURE_FAN_ACOUSTIC_TARGET:
+ od_min_setting = overdrive_lowerlimits->AcousticTargetRpmThreshold;
+ od_max_setting = overdrive_upperlimits->AcousticTargetRpmThreshold;
+ break;
+ case PP_OD_FEATURE_FAN_TARGET_TEMPERATURE:
+ od_min_setting = overdrive_lowerlimits->FanTargetTemperature;
+ od_max_setting = overdrive_upperlimits->FanTargetTemperature;
+ break;
+ case PP_OD_FEATURE_FAN_MINIMUM_PWM:
+ od_min_setting = overdrive_lowerlimits->FanMinimumPwm;
+ od_max_setting = overdrive_upperlimits->FanMinimumPwm;
+ break;
+ default:
+ od_min_setting = od_max_setting = INT_MAX;
+ break;
+ }
+
+ if (min)
+ *min = od_min_setting;
+ if (max)
+ *max = od_max_setting;
+}
+
static int smu_v14_0_2_print_clk_levels(struct smu_context *smu,
enum smu_clk_type clk_type,
char *buf)
{
struct smu_dpm_context *smu_dpm = &smu->smu_dpm;
struct smu_14_0_dpm_context *dpm_context = smu_dpm->dpm_context;
+ OverDriveTableExternal_t *od_table =
+ (OverDriveTableExternal_t *)smu->smu_table.overdrive_table;
struct smu_14_0_dpm_table *single_dpm_table;
struct smu_14_0_pcie_table *pcie_table;
uint32_t gen_speed, lane_width;
int i, curr_freq, size = 0;
+ int32_t min_value, max_value;
int ret = 0;
smu_cmn_get_sysfs_buf(&buf, &size);
@@ -1159,6 +1253,183 @@ static int smu_v14_0_2_print_clk_levels(struct smu_context *smu,
"*" : "");
break;
+ case SMU_OD_SCLK:
+ if (!smu_v14_0_2_is_od_feature_supported(smu,
+ PP_OD_FEATURE_GFXCLK_BIT))
+ break;
+
+ size += sysfs_emit_at(buf, size, "OD_SCLK:\n");
+ size += sysfs_emit_at(buf, size, "0: %uMhz\n1: %uMhz\n",
+ od_table->OverDriveTable.GfxclkFmin,
+ od_table->OverDriveTable.GfxclkFmax);
+ break;
+
+ case SMU_OD_MCLK:
+ if (!smu_v14_0_2_is_od_feature_supported(smu,
+ PP_OD_FEATURE_UCLK_BIT))
+ break;
+
+ size += sysfs_emit_at(buf, size, "OD_MCLK:\n");
+ size += sysfs_emit_at(buf, size, "0: %uMhz\n1: %uMHz\n",
+ od_table->OverDriveTable.UclkFmin,
+ od_table->OverDriveTable.UclkFmax);
+ break;
+
+ case SMU_OD_VDDGFX_OFFSET:
+ if (!smu_v14_0_2_is_od_feature_supported(smu,
+ PP_OD_FEATURE_GFX_VF_CURVE_BIT))
+ break;
+
+ size += sysfs_emit_at(buf, size, "OD_VDDGFX_OFFSET:\n");
+ size += sysfs_emit_at(buf, size, "%dmV\n",
+ od_table->OverDriveTable.VoltageOffsetPerZoneBoundary[0]);
+ break;
+
+ case SMU_OD_FAN_CURVE:
+ if (!smu_v14_0_2_is_od_feature_supported(smu,
+ PP_OD_FEATURE_FAN_CURVE_BIT))
+ break;
+
+ size += sysfs_emit_at(buf, size, "OD_FAN_CURVE:\n");
+ for (i = 0; i < NUM_OD_FAN_MAX_POINTS - 1; i++)
+ size += sysfs_emit_at(buf, size, "%d: %dC %d%%\n",
+ i,
+ (int)od_table->OverDriveTable.FanLinearTempPoints[i],
+ (int)od_table->OverDriveTable.FanLinearPwmPoints[i]);
+
+ size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE");
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_CURVE_TEMP,
+ &min_value,
+ &max_value);
+ size += sysfs_emit_at(buf, size, "FAN_CURVE(hotspot temp): %uC %uC\n",
+ min_value, max_value);
+
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_CURVE_PWM,
+ &min_value,
+ &max_value);
+ size += sysfs_emit_at(buf, size, "FAN_CURVE(fan speed): %u%% %u%%\n",
+ min_value, max_value);
+
+ break;
+
+ case SMU_OD_ACOUSTIC_LIMIT:
+ if (!smu_v14_0_2_is_od_feature_supported(smu,
+ PP_OD_FEATURE_FAN_CURVE_BIT))
+ break;
+
+ size += sysfs_emit_at(buf, size, "OD_ACOUSTIC_LIMIT:\n");
+ size += sysfs_emit_at(buf, size, "%d\n",
+ (int)od_table->OverDriveTable.AcousticLimitRpmThreshold);
+
+ size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE");
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_ACOUSTIC_LIMIT,
+ &min_value,
+ &max_value);
+ size += sysfs_emit_at(buf, size, "ACOUSTIC_LIMIT: %u %u\n",
+ min_value, max_value);
+ break;
+
+ case SMU_OD_ACOUSTIC_TARGET:
+ if (!smu_v14_0_2_is_od_feature_supported(smu,
+ PP_OD_FEATURE_FAN_CURVE_BIT))
+ break;
+
+ size += sysfs_emit_at(buf, size, "OD_ACOUSTIC_TARGET:\n");
+ size += sysfs_emit_at(buf, size, "%d\n",
+ (int)od_table->OverDriveTable.AcousticTargetRpmThreshold);
+
+ size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE");
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_ACOUSTIC_TARGET,
+ &min_value,
+ &max_value);
+ size += sysfs_emit_at(buf, size, "ACOUSTIC_TARGET: %u %u\n",
+ min_value, max_value);
+ break;
+
+ case SMU_OD_FAN_TARGET_TEMPERATURE:
+ if (!smu_v14_0_2_is_od_feature_supported(smu,
+ PP_OD_FEATURE_FAN_CURVE_BIT))
+ break;
+
+ size += sysfs_emit_at(buf, size, "FAN_TARGET_TEMPERATURE:\n");
+ size += sysfs_emit_at(buf, size, "%d\n",
+ (int)od_table->OverDriveTable.FanTargetTemperature);
+
+ size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE");
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_TARGET_TEMPERATURE,
+ &min_value,
+ &max_value);
+ size += sysfs_emit_at(buf, size, "TARGET_TEMPERATURE: %u %u\n",
+ min_value, max_value);
+ break;
+
+ case SMU_OD_FAN_MINIMUM_PWM:
+ if (!smu_v14_0_2_is_od_feature_supported(smu,
+ PP_OD_FEATURE_FAN_CURVE_BIT))
+ break;
+
+ size += sysfs_emit_at(buf, size, "FAN_MINIMUM_PWM:\n");
+ size += sysfs_emit_at(buf, size, "%d\n",
+ (int)od_table->OverDriveTable.FanMinimumPwm);
+
+ size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE");
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_MINIMUM_PWM,
+ &min_value,
+ &max_value);
+ size += sysfs_emit_at(buf, size, "MINIMUM_PWM: %u %u\n",
+ min_value, max_value);
+ break;
+
+ case SMU_OD_RANGE:
+ if (!smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_GFXCLK_BIT) &&
+ !smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_UCLK_BIT) &&
+ !smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_GFX_VF_CURVE_BIT))
+ break;
+
+ size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE");
+
+ if (smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_GFXCLK_BIT)) {
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_GFXCLK_FMIN,
+ &min_value,
+ NULL);
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_GFXCLK_FMAX,
+ NULL,
+ &max_value);
+ size += sysfs_emit_at(buf, size, "SCLK: %7uMhz %10uMhz\n",
+ min_value, max_value);
+ }
+
+ if (smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_UCLK_BIT)) {
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_UCLK_FMIN,
+ &min_value,
+ NULL);
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_UCLK_FMAX,
+ NULL,
+ &max_value);
+ size += sysfs_emit_at(buf, size, "MCLK: %7uMhz %10uMhz\n",
+ min_value, max_value);
+ }
+
+ if (smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_GFX_VF_CURVE_BIT)) {
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_GFX_VF_CURVE,
+ &min_value,
+ &max_value);
+ size += sysfs_emit_at(buf, size, "VDDGFX_OFFSET: %7dmv %10dmv\n",
+ min_value, max_value);
+ }
+ break;
+
default:
break;
}
@@ -1400,7 +1671,27 @@ static int smu_v14_0_2_get_power_limit(struct smu_context *smu,
uint32_t *max_power_limit,
uint32_t *min_power_limit)
{
- // TODO
+ struct smu_table_context *table_context = &smu->smu_table;
+ PPTable_t *pptable = table_context->driver_pptable;
+ CustomSkuTable_t *skutable = &pptable->CustomSkuTable;
+ uint32_t power_limit;
+ uint32_t msg_limit = pptable->SkuTable.MsgLimits.Power[PPT_THROTTLER_PPT0][POWER_SOURCE_AC];
+
+ if (smu_v14_0_get_current_power_limit(smu, &power_limit))
+ power_limit = smu->adev->pm.ac_power ?
+ skutable->SocketPowerLimitAc[PPT_THROTTLER_PPT0] :
+ skutable->SocketPowerLimitDc[PPT_THROTTLER_PPT0];
+
+ if (current_power_limit)
+ *current_power_limit = power_limit;
+ if (default_power_limit)
+ *default_power_limit = power_limit;
+
+ if (max_power_limit)
+ *max_power_limit = msg_limit;
+
+ if (min_power_limit)
+ *min_power_limit = 0;
return 0;
}
@@ -1950,6 +2241,596 @@ static ssize_t smu_v14_0_2_get_gpu_metrics(struct smu_context *smu,
return sizeof(struct gpu_metrics_v1_3);
}
+static void smu_v14_0_2_dump_od_table(struct smu_context *smu,
+ OverDriveTableExternal_t *od_table)
+{
+ struct amdgpu_device *adev = smu->adev;
+
+ dev_dbg(adev->dev, "OD: Gfxclk: (%d, %d)\n", od_table->OverDriveTable.GfxclkFmin,
+ od_table->OverDriveTable.GfxclkFmax);
+ dev_dbg(adev->dev, "OD: Uclk: (%d, %d)\n", od_table->OverDriveTable.UclkFmin,
+ od_table->OverDriveTable.UclkFmax);
+}
+
+static int smu_v14_0_2_upload_overdrive_table(struct smu_context *smu,
+ OverDriveTableExternal_t *od_table)
+{
+ int ret = 0;
+
+ ret = smu_cmn_update_table(smu,
+ SMU_TABLE_OVERDRIVE,
+ 0,
+ (void *)od_table,
+ true);
+ if (ret)
+ dev_err(smu->adev->dev, "Failed to upload overdrive table!\n");
+
+ return ret;
+}
+
+static void smu_v14_0_2_set_supported_od_feature_mask(struct smu_context *smu)
+{
+ struct amdgpu_device *adev = smu->adev;
+
+ if (smu_v14_0_2_is_od_feature_supported(smu,
+ PP_OD_FEATURE_FAN_CURVE_BIT))
+ adev->pm.od_feature_mask |= OD_OPS_SUPPORT_FAN_CURVE_RETRIEVE |
+ OD_OPS_SUPPORT_FAN_CURVE_SET |
+ OD_OPS_SUPPORT_ACOUSTIC_LIMIT_THRESHOLD_RETRIEVE |
+ OD_OPS_SUPPORT_ACOUSTIC_LIMIT_THRESHOLD_SET |
+ OD_OPS_SUPPORT_ACOUSTIC_TARGET_THRESHOLD_RETRIEVE |
+ OD_OPS_SUPPORT_ACOUSTIC_TARGET_THRESHOLD_SET |
+ OD_OPS_SUPPORT_FAN_TARGET_TEMPERATURE_RETRIEVE |
+ OD_OPS_SUPPORT_FAN_TARGET_TEMPERATURE_SET |
+ OD_OPS_SUPPORT_FAN_MINIMUM_PWM_RETRIEVE |
+ OD_OPS_SUPPORT_FAN_MINIMUM_PWM_SET;
+}
+
+static int smu_v14_0_2_get_overdrive_table(struct smu_context *smu,
+ OverDriveTableExternal_t *od_table)
+{
+ int ret = 0;
+
+ ret = smu_cmn_update_table(smu,
+ SMU_TABLE_OVERDRIVE,
+ 0,
+ (void *)od_table,
+ false);
+ if (ret)
+ dev_err(smu->adev->dev, "Failed to get overdrive table!\n");
+
+ return ret;
+}
+
+static int smu_v14_0_2_set_default_od_settings(struct smu_context *smu)
+{
+ OverDriveTableExternal_t *od_table =
+ (OverDriveTableExternal_t *)smu->smu_table.overdrive_table;
+ OverDriveTableExternal_t *boot_od_table =
+ (OverDriveTableExternal_t *)smu->smu_table.boot_overdrive_table;
+ OverDriveTableExternal_t *user_od_table =
+ (OverDriveTableExternal_t *)smu->smu_table.user_overdrive_table;
+ OverDriveTableExternal_t user_od_table_bak;
+ int ret = 0;
+ int i;
+
+ ret = smu_v14_0_2_get_overdrive_table(smu, boot_od_table);
+ if (ret)
+ return ret;
+
+ smu_v14_0_2_dump_od_table(smu, boot_od_table);
+
+ memcpy(od_table,
+ boot_od_table,
+ sizeof(OverDriveTableExternal_t));
+
+ /*
+ * For S3/S4/Runpm resume, we need to setup those overdrive tables again,
+ * but we have to preserve user defined values in "user_od_table".
+ */
+ if (!smu->adev->in_suspend) {
+ memcpy(user_od_table,
+ boot_od_table,
+ sizeof(OverDriveTableExternal_t));
+ smu->user_dpm_profile.user_od = false;
+ } else if (smu->user_dpm_profile.user_od) {
+ memcpy(&user_od_table_bak,
+ user_od_table,
+ sizeof(OverDriveTableExternal_t));
+ memcpy(user_od_table,
+ boot_od_table,
+ sizeof(OverDriveTableExternal_t));
+ user_od_table->OverDriveTable.GfxclkFmin =
+ user_od_table_bak.OverDriveTable.GfxclkFmin;
+ user_od_table->OverDriveTable.GfxclkFmax =
+ user_od_table_bak.OverDriveTable.GfxclkFmax;
+ user_od_table->OverDriveTable.UclkFmin =
+ user_od_table_bak.OverDriveTable.UclkFmin;
+ user_od_table->OverDriveTable.UclkFmax =
+ user_od_table_bak.OverDriveTable.UclkFmax;
+ for (i = 0; i < PP_NUM_OD_VF_CURVE_POINTS; i++)
+ user_od_table->OverDriveTable.VoltageOffsetPerZoneBoundary[i] =
+ user_od_table_bak.OverDriveTable.VoltageOffsetPerZoneBoundary[i];
+ for (i = 0; i < NUM_OD_FAN_MAX_POINTS - 1; i++) {
+ user_od_table->OverDriveTable.FanLinearTempPoints[i] =
+ user_od_table_bak.OverDriveTable.FanLinearTempPoints[i];
+ user_od_table->OverDriveTable.FanLinearPwmPoints[i] =
+ user_od_table_bak.OverDriveTable.FanLinearPwmPoints[i];
+ }
+ user_od_table->OverDriveTable.AcousticLimitRpmThreshold =
+ user_od_table_bak.OverDriveTable.AcousticLimitRpmThreshold;
+ user_od_table->OverDriveTable.AcousticTargetRpmThreshold =
+ user_od_table_bak.OverDriveTable.AcousticTargetRpmThreshold;
+ user_od_table->OverDriveTable.FanTargetTemperature =
+ user_od_table_bak.OverDriveTable.FanTargetTemperature;
+ user_od_table->OverDriveTable.FanMinimumPwm =
+ user_od_table_bak.OverDriveTable.FanMinimumPwm;
+ }
+
+ smu_v14_0_2_set_supported_od_feature_mask(smu);
+
+ return 0;
+}
+
+static int smu_v14_0_2_restore_user_od_settings(struct smu_context *smu)
+{
+ struct smu_table_context *table_context = &smu->smu_table;
+ OverDriveTableExternal_t *od_table = table_context->overdrive_table;
+ OverDriveTableExternal_t *user_od_table = table_context->user_overdrive_table;
+ int res;
+
+ user_od_table->OverDriveTable.FeatureCtrlMask = BIT(PP_OD_FEATURE_GFXCLK_BIT) |
+ BIT(PP_OD_FEATURE_UCLK_BIT) |
+ BIT(PP_OD_FEATURE_GFX_VF_CURVE_BIT) |
+ BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ res = smu_v14_0_2_upload_overdrive_table(smu, user_od_table);
+ user_od_table->OverDriveTable.FeatureCtrlMask = 0;
+ if (res == 0)
+ memcpy(od_table, user_od_table, sizeof(OverDriveTableExternal_t));
+
+ return res;
+}
+
+static int smu_v14_0_2_od_restore_table_single(struct smu_context *smu, long input)
+{
+ struct smu_table_context *table_context = &smu->smu_table;
+ OverDriveTableExternal_t *boot_overdrive_table =
+ (OverDriveTableExternal_t *)table_context->boot_overdrive_table;
+ OverDriveTableExternal_t *od_table =
+ (OverDriveTableExternal_t *)table_context->overdrive_table;
+ struct amdgpu_device *adev = smu->adev;
+ int i;
+
+ switch (input) {
+ case PP_OD_EDIT_FAN_CURVE:
+ for (i = 0; i < NUM_OD_FAN_MAX_POINTS; i++) {
+ od_table->OverDriveTable.FanLinearTempPoints[i] =
+ boot_overdrive_table->OverDriveTable.FanLinearTempPoints[i];
+ od_table->OverDriveTable.FanLinearPwmPoints[i] =
+ boot_overdrive_table->OverDriveTable.FanLinearPwmPoints[i];
+ }
+ od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ break;
+ case PP_OD_EDIT_ACOUSTIC_LIMIT:
+ od_table->OverDriveTable.AcousticLimitRpmThreshold =
+ boot_overdrive_table->OverDriveTable.AcousticLimitRpmThreshold;
+ od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ break;
+ case PP_OD_EDIT_ACOUSTIC_TARGET:
+ od_table->OverDriveTable.AcousticTargetRpmThreshold =
+ boot_overdrive_table->OverDriveTable.AcousticTargetRpmThreshold;
+ od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ break;
+ case PP_OD_EDIT_FAN_TARGET_TEMPERATURE:
+ od_table->OverDriveTable.FanTargetTemperature =
+ boot_overdrive_table->OverDriveTable.FanTargetTemperature;
+ od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ break;
+ case PP_OD_EDIT_FAN_MINIMUM_PWM:
+ od_table->OverDriveTable.FanMinimumPwm =
+ boot_overdrive_table->OverDriveTable.FanMinimumPwm;
+ od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ break;
+ default:
+ dev_info(adev->dev, "Invalid table index: %ld\n", input);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int smu_v14_0_2_od_edit_dpm_table(struct smu_context *smu,
+ enum PP_OD_DPM_TABLE_COMMAND type,
+ long input[],
+ uint32_t size)
+{
+ struct smu_table_context *table_context = &smu->smu_table;
+ OverDriveTableExternal_t *od_table =
+ (OverDriveTableExternal_t *)table_context->overdrive_table;
+ struct amdgpu_device *adev = smu->adev;
+ uint32_t offset_of_voltageoffset;
+ int32_t minimum, maximum;
+ uint32_t feature_ctrlmask;
+ int i, ret = 0;
+
+ switch (type) {
+ case PP_OD_EDIT_SCLK_VDDC_TABLE:
+ if (!smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_GFXCLK_BIT)) {
+ dev_warn(adev->dev, "GFXCLK_LIMITS setting not supported!\n");
+ return -ENOTSUPP;
+ }
+
+ for (i = 0; i < size; i += 2) {
+ if (i + 2 > size) {
+ dev_info(adev->dev, "invalid number of input parameters %d\n", size);
+ return -EINVAL;
+ }
+
+ switch (input[i]) {
+ case 0:
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_GFXCLK_FMIN,
+ &minimum,
+ &maximum);
+ if (input[i + 1] < minimum ||
+ input[i + 1] > maximum) {
+ dev_info(adev->dev, "GfxclkFmin (%ld) must be within [%u, %u]!\n",
+ input[i + 1], minimum, maximum);
+ return -EINVAL;
+ }
+
+ od_table->OverDriveTable.GfxclkFmin = input[i + 1];
+ od_table->OverDriveTable.FeatureCtrlMask |= 1U << PP_OD_FEATURE_GFXCLK_BIT;
+ break;
+
+ case 1:
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_GFXCLK_FMAX,
+ &minimum,
+ &maximum);
+ if (input[i + 1] < minimum ||
+ input[i + 1] > maximum) {
+ dev_info(adev->dev, "GfxclkFmax (%ld) must be within [%u, %u]!\n",
+ input[i + 1], minimum, maximum);
+ return -EINVAL;
+ }
+
+ od_table->OverDriveTable.GfxclkFmax = input[i + 1];
+ od_table->OverDriveTable.FeatureCtrlMask |= 1U << PP_OD_FEATURE_GFXCLK_BIT;
+ break;
+
+ default:
+ dev_info(adev->dev, "Invalid SCLK_VDDC_TABLE index: %ld\n", input[i]);
+ dev_info(adev->dev, "Supported indices: [0:min,1:max]\n");
+ return -EINVAL;
+ }
+ }
+
+ if (od_table->OverDriveTable.GfxclkFmin > od_table->OverDriveTable.GfxclkFmax) {
+ dev_err(adev->dev,
+ "Invalid setting: GfxclkFmin(%u) is bigger than GfxclkFmax(%u)\n",
+ (uint32_t)od_table->OverDriveTable.GfxclkFmin,
+ (uint32_t)od_table->OverDriveTable.GfxclkFmax);
+ return -EINVAL;
+ }
+ break;
+
+ case PP_OD_EDIT_MCLK_VDDC_TABLE:
+ if (!smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_UCLK_BIT)) {
+ dev_warn(adev->dev, "UCLK_LIMITS setting not supported!\n");
+ return -ENOTSUPP;
+ }
+
+ for (i = 0; i < size; i += 2) {
+ if (i + 2 > size) {
+ dev_info(adev->dev, "invalid number of input parameters %d\n", size);
+ return -EINVAL;
+ }
+
+ switch (input[i]) {
+ case 0:
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_UCLK_FMIN,
+ &minimum,
+ &maximum);
+ if (input[i + 1] < minimum ||
+ input[i + 1] > maximum) {
+ dev_info(adev->dev, "UclkFmin (%ld) must be within [%u, %u]!\n",
+ input[i + 1], minimum, maximum);
+ return -EINVAL;
+ }
+
+ od_table->OverDriveTable.UclkFmin = input[i + 1];
+ od_table->OverDriveTable.FeatureCtrlMask |= 1U << PP_OD_FEATURE_UCLK_BIT;
+ break;
+
+ case 1:
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_UCLK_FMAX,
+ &minimum,
+ &maximum);
+ if (input[i + 1] < minimum ||
+ input[i + 1] > maximum) {
+ dev_info(adev->dev, "UclkFmax (%ld) must be within [%u, %u]!\n",
+ input[i + 1], minimum, maximum);
+ return -EINVAL;
+ }
+
+ od_table->OverDriveTable.UclkFmax = input[i + 1];
+ od_table->OverDriveTable.FeatureCtrlMask |= 1U << PP_OD_FEATURE_UCLK_BIT;
+ break;
+
+ default:
+ dev_info(adev->dev, "Invalid MCLK_VDDC_TABLE index: %ld\n", input[i]);
+ dev_info(adev->dev, "Supported indices: [0:min,1:max]\n");
+ return -EINVAL;
+ }
+ }
+
+ if (od_table->OverDriveTable.UclkFmin > od_table->OverDriveTable.UclkFmax) {
+ dev_err(adev->dev,
+ "Invalid setting: UclkFmin(%u) is bigger than UclkFmax(%u)\n",
+ (uint32_t)od_table->OverDriveTable.UclkFmin,
+ (uint32_t)od_table->OverDriveTable.UclkFmax);
+ return -EINVAL;
+ }
+ break;
+
+ case PP_OD_EDIT_VDDGFX_OFFSET:
+ if (!smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_GFX_VF_CURVE_BIT)) {
+ dev_warn(adev->dev, "Gfx offset setting not supported!\n");
+ return -ENOTSUPP;
+ }
+
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_GFX_VF_CURVE,
+ &minimum,
+ &maximum);
+ if (input[0] < minimum ||
+ input[0] > maximum) {
+ dev_info(adev->dev, "Voltage offset (%ld) must be within [%d, %d]!\n",
+ input[0], minimum, maximum);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < PP_NUM_OD_VF_CURVE_POINTS; i++)
+ od_table->OverDriveTable.VoltageOffsetPerZoneBoundary[i] = input[0];
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_GFX_VF_CURVE_BIT);
+ break;
+
+ case PP_OD_EDIT_FAN_CURVE:
+ if (!smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_FAN_CURVE_BIT)) {
+ dev_warn(adev->dev, "Fan curve setting not supported!\n");
+ return -ENOTSUPP;
+ }
+
+ if (input[0] >= NUM_OD_FAN_MAX_POINTS - 1 ||
+ input[0] < 0)
+ return -EINVAL;
+
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_CURVE_TEMP,
+ &minimum,
+ &maximum);
+ if (input[1] < minimum ||
+ input[1] > maximum) {
+ dev_info(adev->dev, "Fan curve temp setting(%ld) must be within [%d, %d]!\n",
+ input[1], minimum, maximum);
+ return -EINVAL;
+ }
+
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_CURVE_PWM,
+ &minimum,
+ &maximum);
+ if (input[2] < minimum ||
+ input[2] > maximum) {
+ dev_info(adev->dev, "Fan curve pwm setting(%ld) must be within [%d, %d]!\n",
+ input[2], minimum, maximum);
+ return -EINVAL;
+ }
+
+ od_table->OverDriveTable.FanLinearTempPoints[input[0]] = input[1];
+ od_table->OverDriveTable.FanLinearPwmPoints[input[0]] = input[2];
+ od_table->OverDriveTable.FanMode = FAN_MODE_MANUAL_LINEAR;
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ break;
+
+ case PP_OD_EDIT_ACOUSTIC_LIMIT:
+ if (!smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_FAN_CURVE_BIT)) {
+ dev_warn(adev->dev, "Fan curve setting not supported!\n");
+ return -ENOTSUPP;
+ }
+
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_ACOUSTIC_LIMIT,
+ &minimum,
+ &maximum);
+ if (input[0] < minimum ||
+ input[0] > maximum) {
+ dev_info(adev->dev, "acoustic limit threshold setting(%ld) must be within [%d, %d]!\n",
+ input[0], minimum, maximum);
+ return -EINVAL;
+ }
+
+ od_table->OverDriveTable.AcousticLimitRpmThreshold = input[0];
+ od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ break;
+
+ case PP_OD_EDIT_ACOUSTIC_TARGET:
+ if (!smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_FAN_CURVE_BIT)) {
+ dev_warn(adev->dev, "Fan curve setting not supported!\n");
+ return -ENOTSUPP;
+ }
+
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_ACOUSTIC_TARGET,
+ &minimum,
+ &maximum);
+ if (input[0] < minimum ||
+ input[0] > maximum) {
+ dev_info(adev->dev, "acoustic target threshold setting(%ld) must be within [%d, %d]!\n",
+ input[0], minimum, maximum);
+ return -EINVAL;
+ }
+
+ od_table->OverDriveTable.AcousticTargetRpmThreshold = input[0];
+ od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ break;
+
+ case PP_OD_EDIT_FAN_TARGET_TEMPERATURE:
+ if (!smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_FAN_CURVE_BIT)) {
+ dev_warn(adev->dev, "Fan curve setting not supported!\n");
+ return -ENOTSUPP;
+ }
+
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_TARGET_TEMPERATURE,
+ &minimum,
+ &maximum);
+ if (input[0] < minimum ||
+ input[0] > maximum) {
+ dev_info(adev->dev, "fan target temperature setting(%ld) must be within [%d, %d]!\n",
+ input[0], minimum, maximum);
+ return -EINVAL;
+ }
+
+ od_table->OverDriveTable.FanTargetTemperature = input[0];
+ od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ break;
+
+ case PP_OD_EDIT_FAN_MINIMUM_PWM:
+ if (!smu_v14_0_2_is_od_feature_supported(smu, PP_OD_FEATURE_FAN_CURVE_BIT)) {
+ dev_warn(adev->dev, "Fan curve setting not supported!\n");
+ return -ENOTSUPP;
+ }
+
+ smu_v14_0_2_get_od_setting_limits(smu,
+ PP_OD_FEATURE_FAN_MINIMUM_PWM,
+ &minimum,
+ &maximum);
+ if (input[0] < minimum ||
+ input[0] > maximum) {
+ dev_info(adev->dev, "fan minimum pwm setting(%ld) must be within [%d, %d]!\n",
+ input[0], minimum, maximum);
+ return -EINVAL;
+ }
+
+ od_table->OverDriveTable.FanMinimumPwm = input[0];
+ od_table->OverDriveTable.FanMode = FAN_MODE_AUTO;
+ od_table->OverDriveTable.FeatureCtrlMask |= BIT(PP_OD_FEATURE_FAN_CURVE_BIT);
+ break;
+
+ case PP_OD_RESTORE_DEFAULT_TABLE:
+ if (size == 1) {
+ ret = smu_v14_0_2_od_restore_table_single(smu, input[0]);
+ if (ret)
+ return ret;
+ } else {
+ feature_ctrlmask = od_table->OverDriveTable.FeatureCtrlMask;
+ memcpy(od_table,
+ table_context->boot_overdrive_table,
+ sizeof(OverDriveTableExternal_t));
+ od_table->OverDriveTable.FeatureCtrlMask = feature_ctrlmask;
+ }
+ fallthrough;
+ case PP_OD_COMMIT_DPM_TABLE:
+ /*
+ * The member below instructs PMFW the settings focused in
+ * this single operation.
+ * `uint32_t FeatureCtrlMask;`
+ * It does not contain actual informations about user's custom
+ * settings. Thus we do not cache it.
+ */
+ offset_of_voltageoffset = offsetof(OverDriveTable_t, VoltageOffsetPerZoneBoundary);
+ if (memcmp((u8 *)od_table + offset_of_voltageoffset,
+ table_context->user_overdrive_table + offset_of_voltageoffset,
+ sizeof(OverDriveTableExternal_t) - offset_of_voltageoffset)) {
+ smu_v14_0_2_dump_od_table(smu, od_table);
+
+ ret = smu_v14_0_2_upload_overdrive_table(smu, od_table);
+ if (ret) {
+ dev_err(adev->dev, "Failed to upload overdrive table!\n");
+ return ret;
+ }
+
+ od_table->OverDriveTable.FeatureCtrlMask = 0;
+ memcpy(table_context->user_overdrive_table + offset_of_voltageoffset,
+ (u8 *)od_table + offset_of_voltageoffset,
+ sizeof(OverDriveTableExternal_t) - offset_of_voltageoffset);
+
+ if (!memcmp(table_context->user_overdrive_table,
+ table_context->boot_overdrive_table,
+ sizeof(OverDriveTableExternal_t)))
+ smu->user_dpm_profile.user_od = false;
+ else
+ smu->user_dpm_profile.user_od = true;
+ }
+ break;
+
+ default:
+ return -ENOSYS;
+ }
+
+ return ret;
+}
+
+static int smu_v14_0_2_set_power_limit(struct smu_context *smu,
+ enum smu_ppt_limit_type limit_type,
+ uint32_t limit)
+{
+ PPTable_t *pptable = smu->smu_table.driver_pptable;
+ uint32_t msg_limit = pptable->SkuTable.MsgLimits.Power[PPT_THROTTLER_PPT0][POWER_SOURCE_AC];
+ struct smu_table_context *table_context = &smu->smu_table;
+ OverDriveTableExternal_t *od_table =
+ (OverDriveTableExternal_t *)table_context->overdrive_table;
+ int ret = 0;
+
+ if (limit_type != SMU_DEFAULT_PPT_LIMIT)
+ return -EINVAL;
+
+ if (limit <= msg_limit) {
+ if (smu->current_power_limit > msg_limit) {
+ od_table->OverDriveTable.Ppt = 0;
+ od_table->OverDriveTable.FeatureCtrlMask |= 1U << PP_OD_FEATURE_PPT_BIT;
+
+ ret = smu_v14_0_2_upload_overdrive_table(smu, od_table);
+ if (ret) {
+ dev_err(smu->adev->dev, "Failed to upload overdrive table!\n");
+ return ret;
+ }
+ }
+ return smu_v14_0_set_power_limit(smu, limit_type, limit);
+ } else if (smu->od_enabled) {
+ ret = smu_v14_0_set_power_limit(smu, limit_type, msg_limit);
+ if (ret)
+ return ret;
+
+ od_table->OverDriveTable.Ppt = (limit * 100) / msg_limit - 100;
+ od_table->OverDriveTable.FeatureCtrlMask |= 1U << PP_OD_FEATURE_PPT_BIT;
+
+ ret = smu_v14_0_2_upload_overdrive_table(smu, od_table);
+ if (ret) {
+ dev_err(smu->adev->dev, "Failed to upload overdrive table!\n");
+ return ret;
+ }
+
+ smu->current_power_limit = limit;
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const struct pptable_funcs smu_v14_0_2_ppt_funcs = {
.get_allowed_feature_mask = smu_v14_0_2_get_allowed_feature_mask,
.set_default_dpm_table = smu_v14_0_2_set_default_dpm_table,
@@ -1988,13 +2869,16 @@ static const struct pptable_funcs smu_v14_0_2_ppt_funcs = {
.notify_memory_pool_location = smu_v14_0_notify_memory_pool_location,
.get_gpu_metrics = smu_v14_0_2_get_gpu_metrics,
.set_soft_freq_limited_range = smu_v14_0_set_soft_freq_limited_range,
+ .set_default_od_settings = smu_v14_0_2_set_default_od_settings,
+ .restore_user_od_settings = smu_v14_0_2_restore_user_od_settings,
+ .od_edit_dpm_table = smu_v14_0_2_od_edit_dpm_table,
.init_pptable_microcode = smu_v14_0_init_pptable_microcode,
.populate_umd_state_clk = smu_v14_0_2_populate_umd_state_clk,
.set_performance_level = smu_v14_0_set_performance_level,
.gfx_off_control = smu_v14_0_gfx_off_control,
.get_unique_id = smu_v14_0_2_get_unique_id,
.get_power_limit = smu_v14_0_2_get_power_limit,
- .set_power_limit = smu_v14_0_set_power_limit,
+ .set_power_limit = smu_v14_0_2_set_power_limit,
.set_power_source = smu_v14_0_set_power_source,
.get_power_profile_mode = smu_v14_0_2_get_power_profile_mode,
.set_power_profile_mode = smu_v14_0_2_set_power_profile_mode,
--
2.34.1
More information about the amd-gfx
mailing list