[PATCH v2] drm/amdgpu: use local xcc to flush tlb

[Lazar, Lijo]

On 6/12/2024 3:06 PM, Yiqing Yao wrote:
> When flushing gpu tlb using kiq for gfxhub, kiq ring is always
> local by selecting kiq instance. Test shows mmreg write data packet's
> higher bits then 16 have no effect when flush using kiq on gfxhub.
> 
> Also some variant have policy blocking higher offset when req/ack is set
> with extra bits and can cause flush to timeout.
> 
> So keep the lower 16 bits only.
> 
> Remove redundant code.
> 
> Signed-off-by: Yiqing Yao <YiQing.Yao at amd.com>
> ---
>  drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
> index 350f6b6676f1..f3fe318e0c1d 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
> @@ -853,8 +853,16 @@ static void gmc_v9_0_flush_gpu_tlb(struct amdgpu_device *adev, uint32_t vmid,
>  	 */
>  	if (adev->gfx.kiq[inst].ring.sched.ready &&
>  	    (amdgpu_sriov_runtime(adev) || !amdgpu_sriov_vf(adev))) {
> -		uint32_t req = hub->vm_inv_eng0_req + hub->eng_distance * eng;
> -		uint32_t ack = hub->vm_inv_eng0_ack + hub->eng_distance * eng;
> +
> +		/* 
> +		 * Select lower 16 bits to write in local xcc when flushing
> +		 * using kiq to write gfx as higher bits are always ignored
> +		 */
> +		if (vmhub < AMDGPU_MMHUB0(0))
> +		{
> +			req = req & 0xffff;
> +			ack = ack & 0xffff;
> +		}
>  

The issue is incorrect mask passed by host driver in discovery table
which results in incorrect register offsets. The fix should be in
discovery table passed by host driver and RRMT mechanism will then take
care.

Thanks,
Lijo

>  		amdgpu_gmc_fw_reg_write_reg_wait(adev, req, ack, inv_req,
>  						 1 << vmid, inst);