[PATCH] drm/amdgpu/pm: Fix the error of pwm1_enable setting

[Lazar, Lijo]

On 3/1/2024 1:15 PM, Ma Jun wrote:
> Fix the pwm_mode value error which used for
> pwm1_enable setting
> 
> Signed-off-by: Ma Jun <Jun.Ma2 at amd.com>
> ---
>  drivers/gpu/drm/amd/pm/amdgpu_pm.c | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> index 9e70c41ad98f..7cc5cd7616b1 100644
> --- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> +++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
> @@ -2582,6 +2582,7 @@ static ssize_t amdgpu_hwmon_set_pwm1_enable(struct device *dev,
>  	struct amdgpu_device *adev = dev_get_drvdata(dev);
>  	int err, ret;
>  	int value;
> +	u32 pwm_mode;
>  

You may move this declaration up to follow reverse Christmas tree order.

Reviewed-by: Lijo Lazar <lijo.lazar at amd.com>

Thanks,
Lijo
>  	if (amdgpu_in_reset(adev))
>  		return -EPERM;
> @@ -2592,13 +2593,22 @@ static ssize_t amdgpu_hwmon_set_pwm1_enable(struct device *dev,
>  	if (err)
>  		return err;
>  
> +	if (value == 0)
> +		pwm_mode = AMD_FAN_CTRL_NONE;
> +	else if (value == 1)
> +		pwm_mode = AMD_FAN_CTRL_MANUAL;
> +	else if (value == 2)
> +		pwm_mode = AMD_FAN_CTRL_AUTO;
> +	else
> +		return -EINVAL;
> +
>  	ret = pm_runtime_get_sync(adev_to_drm(adev)->dev);
>  	if (ret < 0) {
>  		pm_runtime_put_autosuspend(adev_to_drm(adev)->dev);
>  		return ret;
>  	}
>  
> -	ret = amdgpu_dpm_set_fan_control_mode(adev, value);
> +	ret = amdgpu_dpm_set_fan_control_mode(adev, pwm_mode);
>  
>  	pm_runtime_mark_last_busy(adev_to_drm(adev)->dev);
>  	pm_runtime_put_autosuspend(adev_to_drm(adev)->dev);