[PATCH IP-REVIEW] drm/amd/display: Update dcn351 to latest dcn35 config

[Roman.Li at amd.com]

From: Sung Joon Kim <sungkim at amd.com>

[why & how]
There were some fixes in dcn35 that need
to be ported over to dcn351 to prevent any
regression.

Signed-off-by: Sung Joon Kim <sungkim at amd.com>
Reviewed-by: Liu, Xi (Alex) <xiliu102 at amd.com>
---
 drivers/gpu/drm/amd/display/dc/dml/dcn351/dcn351_fpu.c        |  9 ++++++---
 drivers/gpu/drm/amd/display/dc/hwss/dcn351/dcn351_init.c      |  2 +-
 .../gpu/drm/amd/display/dc/resource/dcn351/dcn351_resource.c  | 11 ++++++++---
 3 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn351/dcn351_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn351/dcn351_fpu.c
index b624640..b3ffab7 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn351/dcn351_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn351/dcn351_fpu.c
@@ -402,6 +402,8 @@ void dcn351_update_bw_bounding_box_fpu(struct dc *dc,
 				clock_limits[i].socclk_mhz;
 			dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].memclk_mhz =
 				clk_table->entries[i].memclk_mhz * clk_table->entries[i].wck_ratio;
+			dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].dtbclk_mhz =
+				clock_limits[i].dtbclk_mhz;
 			dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_dcfclk_levels =
 				clk_table->num_entries;
 			dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_fclk_levels =
@@ -414,6 +416,8 @@ void dcn351_update_bw_bounding_box_fpu(struct dc *dc,
 				clk_table->num_entries;
 			dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_memclk_levels =
 				clk_table->num_entries;
+			dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_dtbclk_levels =
+				clk_table->num_entries;
 		}
 	}
 
@@ -613,6 +617,7 @@ void dcn351_decide_zstate_support(struct dc *dc, struct dc_state *context)
 		if (context->res_ctx.pipe_ctx[i].plane_state)
 			plane_count++;
 	}
+
 	/*dcn351 does not support z9/z10*/
 	if (context->stream_count == 0 || plane_count == 0) {
 		support = DCN_ZSTATE_SUPPORT_ALLOW_Z8_ONLY;
@@ -626,11 +631,9 @@ void dcn351_decide_zstate_support(struct dc *dc, struct dc_state *context)
 			dc->debug.minimum_z8_residency_time > 0 ? dc->debug.minimum_z8_residency_time : 1000;
 		bool allow_z8 = context->bw_ctx.dml.vba.StutterPeriod > (double)minmum_z8_residency;
 
-
 		/*for psr1/psr-su, we allow z8 and z10 based on latency, for replay with IPS enabled, it will enter ips2*/
-		 if (is_pwrseq0 && (is_psr || is_replay))
+		if (is_pwrseq0 && (is_psr || is_replay))
 			support = allow_z8 ? allow_z8 : DCN_ZSTATE_SUPPORT_DISALLOW;
-
 	}
 	context->bw_ctx.bw.dcn.clk.zstate_support = support;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn351/dcn351_init.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn351/dcn351_init.c
index ab17fa1..670255c 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn351/dcn351_init.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn351/dcn351_init.c
@@ -67,7 +67,7 @@ static const struct hw_sequencer_funcs dcn351_funcs = {
 	.prepare_bandwidth = dcn35_prepare_bandwidth,
 	.optimize_bandwidth = dcn35_optimize_bandwidth,
 	.update_bandwidth = dcn20_update_bandwidth,
-	.set_drr = dcn10_set_drr,
+	.set_drr = dcn35_set_drr,
 	.get_position = dcn10_get_position,
 	.set_static_screen_control = dcn35_set_static_screen_control,
 	.setup_stereo = dcn10_setup_stereo,
diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn351/dcn351_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn351/dcn351_resource.c
index 2dfd73d..fe13c89 100644
--- a/drivers/gpu/drm/amd/display/dc/resource/dcn351/dcn351_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/resource/dcn351/dcn351_resource.c
@@ -700,6 +700,8 @@ static const struct dc_debug_options debug_defaults_drv = {
 	.disable_dcc = DCC_ENABLE,
 	.disable_dpp_power_gate = true,
 	.disable_hubp_power_gate = true,
+	.disable_optc_power_gate = true, /*should the same as above two*/
+	.disable_hpo_power_gate = true, /*dmubfw force domain25 on*/
 	.disable_clock_gate = false,
 	.disable_dsc_power_gate = true,
 	.vsr_support = true,
@@ -742,12 +744,13 @@ static const struct dc_debug_options debug_defaults_drv = {
 	},
 	.seamless_boot_odm_combine = DML_FAIL_SOURCE_PIXEL_FORMAT,
 	.enable_z9_disable_interface = true, /* Allow support for the PMFW interface for disable Z9*/
+	.minimum_z8_residency_time = 2100,
 	.using_dml2 = true,
 	.support_eDP1_5 = true,
 	.enable_hpo_pg_support = false,
 	.enable_legacy_fast_update = true,
 	.enable_single_display_2to1_odm_policy = true,
-	.disable_idle_power_optimizations = true,
+	.disable_idle_power_optimizations = false,
 	.dmcub_emulation = false,
 	.disable_boot_optimizations = false,
 	.disable_unbounded_requesting = false,
@@ -758,8 +761,10 @@ static const struct dc_debug_options debug_defaults_drv = {
 	.disable_z10 = true,
 	.ignore_pg = true,
 	.psp_disabled_wa = true,
-	.ips2_eval_delay_us = 200,
-	.ips2_entry_delay_us = 400
+	.ips2_eval_delay_us = 2000,
+	.ips2_entry_delay_us = 800,
+	.disable_dmub_reallow_idle = true,
+	.static_screen_wait_frames = 2,
 };
 
 static const struct dc_panel_config panel_config_defaults = {
-- 
2.7.4