FAILED: Patch "drm/amd/display: Revert Remove pixle rate limit for subvp" failed to apply to 5.10-stable tree

[Sasha Levin]

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable at vger.kernel.org>.

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

>From cf8c498694a443e28dc1222f3ab94677114a4724 Mon Sep 17 00:00:00 2001
From: Wenjing Liu <wenjing.liu at amd.com>
Date: Mon, 4 Mar 2024 11:20:27 -0500
Subject: [PATCH] drm/amd/display: Revert Remove pixle rate limit for subvp

This reverts commit 340383c734f8 ("drm/amd/display: Remove pixle rate
limit for subvp")

[why]
The original commit causes a regression when subvp is applied
on ODM required 8k60hz timing. The display shows black screen
on boot. The issue can be recovered with hotplug. It also causes
MPO to fail. We will temprarily revert this commit and investigate
the root cause further.

Cc: Mario Limonciello <mario.limonciello at amd.com>
Cc: Alex Deucher <alexander.deucher at amd.com>
Cc: stable at vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere at amd.com>
Reviewed-by: Martin Leung <martin.leung at amd.com>
Acked-by: Wayne Lin <wayne.lin at amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu at amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
 drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index b49e1dc9d8ba5..a0a65e0991041 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -623,6 +623,7 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc,
 		 * - Not TMZ surface
 		 */
 		if (pipe->plane_state && !pipe->top_pipe && !dcn32_is_center_timing(pipe) &&
+				!(pipe->stream->timing.pix_clk_100hz / 10000 > DCN3_2_MAX_SUBVP_PIXEL_RATE_MHZ) &&
 				(!dcn32_is_psr_capable(pipe) || (context->stream_count == 1 && dc->caps.dmub_caps.subvp_psr)) &&
 				dc_state_get_pipe_subvp_type(context, pipe) == SUBVP_NONE &&
 				(refresh_rate < 120 || dcn32_allow_subvp_high_refresh_rate(dc, context, pipe)) &&
-- 
2.43.0