FAILED: Patch "drm/amd/display: adjust few initialization order in dm" failed to apply to 5.10-stable tree
Sasha Levin
sashal at kernel.org
Wed Mar 27 12:18:38 UTC 2024
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable at vger.kernel.org>.
Thanks,
Sasha
------------------ original commit in Linus's tree ------------------
>From c9aef4f6c6d7cdc92a64ffe761c6921ec85157ae Mon Sep 17 00:00:00 2001
From: Wayne Lin <wayne.lin at amd.com>
Date: Fri, 2 Feb 2024 17:34:11 +0800
Subject: [PATCH] drm/amd/display: adjust few initialization order in dm
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence
[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable <stable at vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai at amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira at amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler at amd.com>
Signed-off-by: Wayne Lin <wayne.lin at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 37 +++++++++----------
1 file changed, 18 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 985137b51372d..8b13cb334b366 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1844,21 +1844,12 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
DRM_ERROR("amdgpu: fail to register dmub aux callback");
goto error;
}
- if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD, dmub_hpd_callback, true)) {
- DRM_ERROR("amdgpu: fail to register dmub hpd callback");
- goto error;
- }
- if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD_IRQ, dmub_hpd_callback, true)) {
- DRM_ERROR("amdgpu: fail to register dmub hpd callback");
- goto error;
- }
- }
-
- /* Enable outbox notification only after IRQ handlers are registered and DMUB is alive.
- * It is expected that DMUB will resend any pending notifications at this point, for
- * example HPD from DPIA.
- */
- if (dc_is_dmub_outbox_supported(adev->dm.dc)) {
+ /* Enable outbox notification only after IRQ handlers are registered and DMUB is alive.
+ * It is expected that DMUB will resend any pending notifications at this point. Note
+ * that hpd and hpd_irq handler registration are deferred to register_hpd_handlers() to
+ * align legacy interface initialization sequence. Connection status will be proactivly
+ * detected once in the amdgpu_dm_initialize_drm_device.
+ */
dc_enable_dmub_outbox(adev->dm.dc);
/* DPIA trace goes to dmesg logs only if outbox is enabled */
@@ -3547,6 +3538,14 @@ static void register_hpd_handlers(struct amdgpu_device *adev)
int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT;
int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT;
+ if (dc_is_dmub_outbox_supported(adev->dm.dc)) {
+ if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD, dmub_hpd_callback, true))
+ DRM_ERROR("amdgpu: fail to register dmub hpd callback");
+
+ if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD_IRQ, dmub_hpd_callback, true))
+ DRM_ERROR("amdgpu: fail to register dmub hpd callback");
+ }
+
list_for_each_entry(connector,
&dev->mode_config.connector_list, head) {
@@ -3575,10 +3574,6 @@ static void register_hpd_handlers(struct amdgpu_device *adev)
handle_hpd_rx_irq,
(void *) aconnector);
}
-
- if (adev->dm.hpd_rx_offload_wq)
- adev->dm.hpd_rx_offload_wq[connector->index].aconnector =
- aconnector;
}
}
@@ -4590,6 +4585,10 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev)
goto fail;
}
+ if (dm->hpd_rx_offload_wq)
+ dm->hpd_rx_offload_wq[aconnector->base.index].aconnector =
+ aconnector;
+
if (!dc_link_detect_connection_type(link, &new_connection_type))
DRM_ERROR("KMS: Failed to detect connector\n");
--
2.43.0
More information about the amd-gfx
mailing list