[PATCH] Revert "drm/amd/display: fix USB-C flag update after enc10 feature init"

[Alex Deucher]

This reverts commit b5abd7f983e14054593dc91d6df2aa5f8cc67652.

This change breaks DSC on 4k monitors at 144Hz over USB-C.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
Cc: Muhammad Ahmed <ahmed.ahmed at amd.com>
Cc: Tom Chung <chiahsuan.chung at amd.com>
Cc: Charlene Liu <charlene.liu at amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz at amd.com>
Cc: Harry Wentland <harry.wentland at amd.com>
---
 .../gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c | 8 +++-----
 .../gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c | 4 ++--
 2 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c
index e224a028d68ac..8a0460e863097 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c
@@ -248,14 +248,12 @@ void dcn32_link_encoder_construct(
 	enc10->base.hpd_source = init_data->hpd_source;
 	enc10->base.connector = init_data->connector;
 
-	enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
-
-	enc10->base.features = *enc_features;
 	if (enc10->base.connector.id == CONNECTOR_ID_USBC)
 		enc10->base.features.flags.bits.DP_IS_USB_C = 1;
 
-	if (enc10->base.connector.id == CONNECTOR_ID_USBC)
-		enc10->base.features.flags.bits.DP_IS_USB_C = 1;
+	enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
+
+	enc10->base.features = *enc_features;
 
 	enc10->base.transmitter = init_data->transmitter;
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c
index 6e6ae3de08e4c..6864b6d174370 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c
@@ -184,6 +184,8 @@ void dcn35_link_encoder_construct(
 	enc10->base.hpd_source = init_data->hpd_source;
 	enc10->base.connector = init_data->connector;
 
+	if (enc10->base.connector.id == CONNECTOR_ID_USBC)
+		enc10->base.features.flags.bits.DP_IS_USB_C = 1;
 
 	enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
 
@@ -238,8 +240,6 @@ void dcn35_link_encoder_construct(
 	}
 
 	enc10->base.features.flags.bits.HDMI_6GB_EN = 1;
-	if (enc10->base.connector.id == CONNECTOR_ID_USBC)
-		enc10->base.features.flags.bits.DP_IS_USB_C = 1;
 
 	if (bp_funcs->get_connector_speed_cap_info)
 		result = bp_funcs->get_connector_speed_cap_info(enc10->base.ctx->dc_bios,
-- 
2.44.0