[PATCH] drm/amdgpu/jpeg: keep drm kernel message consistent

[Alex Deucher]

On Thu, May 9, 2024 at 5:31 PM David Wu <davidwu2 at amd.com> wrote:
>
> Hi Alex,
>
> Thanks for the suggestion!
> What I am thinking is "DRM_DEV_INFO" should not be the one we want - as it is more like a debug message.
>
> [drm:jpeg_v5_0_0_hw_init [amdgpu]] JPEG decode initialized successfully.
>
> instead I prefer to use this format:
> "amdgpu 0000:43:00.0: amdgpu: JPEG decode initialized successfully."
>
> but again I dislike it as well as there are 2 "amdgpu"s in the same message.

You can use just plain dev_info().

Alex

>
> To make it consistent the "DRM_INFO" is used everywhere in the amdgpu code.
> only the following jpeg code uses DRM_DEV_INFO and one file for vcn. All other jpeg versions have already changed to DRM_INFO.
>
> grep -r DRM_DEV_INFO *
> amdgpu/jpeg_v4_0_3.c: DRM_DEV_INFO(adev->dev, "JPEG decode initialized successfully.\n");
> amdgpu/jpeg_v4_0_3.c: DRM_DEV_INFO(adev->dev, "JPEG decode is enabled in VM mode\n");
> amdgpu/vcn_v4_0_3.c: DRM_DEV_INFO(adev->dev, "VCN decode initialized successfully(under %s).\n",
> amdgpu/vcn_v4_0_3.c: DRM_DEV_INFO(adev->dev, "VCN decode is enabled in VM mode\n");
> amdgpu/jpeg_v4_0_5.c: DRM_DEV_INFO(adev->dev, "JPEG decode initialized successfully under DPG Mode");
> amdgpu/jpeg_v4_0_5.c: DRM_DEV_INFO(adev->dev, "JPEG%d decode is enabled in VM mode\n", i);
> amdgpu/jpeg_v5_0_0.c: DRM_DEV_INFO(adev->dev, "JPEG decode initialized successfully under DPG Mode");
> amdgpu/jpeg_v5_0_0.c: DRM_DEV_INFO(adev->dev, "JPEG%d decode is enabled in VM mode\n", i);
> amdgpu/jpeg_v4_0.c: DRM_DEV_INFO(adev->dev, "JPEG decode initialized successfully.\n");
> amdgpu/jpeg_v4_0.c: DRM_DEV_INFO(adev->dev, "JPEG decode is enabled in VM mode\n");
>
> If the rest of code in amdgpu uses DRM_INFO why should we make VCN and JPEG special?
> To address the identification of which GPUs - we need to check the kernel message after each IP DISCOVERY.
> I do not see a reason to mess them up.
> Regards,
> David
> On 2024-05-09 16:59, Alex Deucher wrote:
>
> On Thu, May 9, 2024 at 4:57 PM David (Ming Qiang) Wu <David.Wu3 at amd.com> wrote:
>
> amdgpu jpeg kernel message is different than others such as vcn:
>   [drm:jpeg_v5_0_0_hw_init [amdgpu]] JPEG decode initialized successfully.
>
> This patch is to make them consistent.
>
> The message after the change is:
>   [drm] JPEG decode initialized successfully.
>
> Please convert the others to DRM_DEV_INFO instead.  Otherwise we can't
> tell which GPUs these messages refer to on multi-GPU systems.
>
> Alex
>
> Signed-off-by: David (Ming Qiang) Wu <David.Wu3 at amd.com>
> ---
>  drivers/gpu/drm/amd/amdgpu/jpeg_v5_0_0.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/jpeg_v5_0_0.c b/drivers/gpu/drm/amd/amdgpu/jpeg_v5_0_0.c
> index 64c856bfe0cb..4be0668ab97d 100644
> --- a/drivers/gpu/drm/amd/amdgpu/jpeg_v5_0_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v5_0_0.c
> @@ -145,7 +145,7 @@ static int jpeg_v5_0_0_hw_init(void *handle)
>         if (r)
>                 return r;
>
> -       DRM_DEV_INFO(adev->dev, "JPEG decode initialized successfully.\n");
> +       DRM_INFO("JPEG decode initialized successfully.\n");
>
>         return 0;
>  }
> @@ -549,7 +549,7 @@ static const struct amdgpu_ring_funcs jpeg_v5_0_0_dec_ring_vm_funcs = {
>  static void jpeg_v5_0_0_set_dec_ring_funcs(struct amdgpu_device *adev)
>  {
>         adev->jpeg.inst->ring_dec->funcs = &jpeg_v5_0_0_dec_ring_vm_funcs;
> -       DRM_DEV_INFO(adev->dev, "JPEG decode is enabled in VM mode\n");
> +       DRM_INFO("JPEG decode is enabled in VM mode\n");
>  }
>
>  static const struct amdgpu_irq_src_funcs jpeg_v5_0_0_irq_funcs = {
> --
> 2.34.1
>