[PATCH] drm/amdgpu: use u32 for buf size in __amdgpu_eeprom_xfer

[Wang, Yang(Kevin)]

[AMD Official Use Only - AMD Internal Distribution Only]

Reviewed-by: Yang Wang <kevinyang.wang at amd.com>

Best Regards,
Kevin

-----Original Message-----
From: amd-gfx <amd-gfx-bounces at lists.freedesktop.org> On Behalf Of Tao Zhou
Sent: Tuesday, May 21, 2024 11:17 AM
To: amd-gfx at lists.freedesktop.org
Cc: Zhou1, Tao <Tao.Zhou1 at amd.com>
Subject: [PATCH] drm/amdgpu: use u32 for buf size in __amdgpu_eeprom_xfer

And also make sure the the value of msg[1].len should be in the range of u16.

Signed-off-by: Tao Zhou <tao.zhou1 at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c
index 09a34c7258e2..35fee3e8cde2 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c
@@ -90,7 +90,7 @@
 #define MAKE_I2C_ADDR(_aa) ((0xA << 3) | (((_aa) >> 16) & 0xF))

 static int __amdgpu_eeprom_xfer(struct i2c_adapter *i2c_adap, u32 eeprom_addr,
-                               u8 *eeprom_buf, u16 buf_size, bool read)
+                               u8 *eeprom_buf, u32 buf_size, bool read)
 {
        u8 eeprom_offset_buf[EEPROM_OFFSET_SIZE];
        struct i2c_msg msgs[] = {
@@ -133,15 +133,15 @@ static int __amdgpu_eeprom_xfer(struct i2c_adapter *i2c_adap, u32 eeprom_addr,
                         * cycle begins. This is implied for the
                         * "i2c_transfer()" abstraction.
                         */
-                       len = min(EEPROM_PAGE_SIZE - (eeprom_addr &
-                                                     EEPROM_PAGE_MASK),
-                                 (u32)buf_size);
+                       len = min(EEPROM_PAGE_SIZE - (eeprom_addr & EEPROM_PAGE_MASK),
+                                       buf_size);
                } else {
                        /* Reading from the EEPROM has no limitation
                         * on the number of bytes read from the EEPROM
                         * device--they are simply sequenced out.
+                        * Keep in mind that i2c_msg.len is u16 type.
                         */
-                       len = buf_size;
+                       len = min(U16_MAX, buf_size);
                }
                msgs[1].len = len;
                msgs[1].buf = eeprom_buf;
--
2.34.1