[PATCH] drm/amdgpu: drop some kernel messages in VCN code

[David Wu]

please see in line.

On 2024-05-23 12:02, Dong, Ruijing wrote:
> [AMD Official Use Only - AMD Internal Distribution Only]
>
> Please see my question inline below.
>
> Thanks,
> Ruijing
>
> -----Original Message-----
> From: Wu, David <David.Wu3 at amd.com>
> Sent: Thursday, May 23, 2024 11:05 AM
> To: amd-gfx at lists.freedesktop.org; Koenig, Christian <Christian.Koenig at amd.com>
> Cc: Deucher, Alexander <Alexander.Deucher at amd.com>; Liu, Leo <Leo.Liu at amd.com>; Jiang, Sonny <Sonny.Jiang at amd.com>; Dong, Ruijing <Ruijing.Dong at amd.com>
> Subject: [PATCH] drm/amdgpu: drop some kernel messages in VCN code
>
> We have messages when the VCN fails to initialize and there is no need to report on success.
> Also PSP loading FWs is the default for production.
>
> Signed-off-by: David (Ming Qiang) Wu <David.Wu3 at amd.com>
> ---
>   drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c  |  1 -  drivers/gpu/drm/amd/amdgpu/jpeg_v5_0_0.c |  3 ---  drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c  | 10 +---------
>   3 files changed, 1 insertion(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c
> index b89605b400c0..5e2b7c340724 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c
> @@ -1078,7 +1078,6 @@ void amdgpu_vcn_setup_ucode(struct amdgpu_device *adev)
>                              IP_VERSION(4, 0, 3))
>                                  break;
>                  }
> -               dev_info(adev->dev, "Will use PSP to load VCN firmware\n");
>          }
>   }
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/jpeg_v5_0_0.c b/drivers/gpu/drm/amd/amdgpu/jpeg_v5_0_0.c
> index 64c856bfe0cb..68ef29bc70e2 100644
> --- a/drivers/gpu/drm/amd/amdgpu/jpeg_v5_0_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v5_0_0.c
> @@ -145,8 +145,6 @@ static int jpeg_v5_0_0_hw_init(void *handle)
>          if (r)
>                  return r;
>
> -       DRM_DEV_INFO(adev->dev, "JPEG decode initialized successfully.\n");
> -
>          return 0;
>   }
>
> @@ -549,7 +547,6 @@ static const struct amdgpu_ring_funcs jpeg_v5_0_0_dec_ring_vm_funcs = {  static void jpeg_v5_0_0_set_dec_ring_funcs(struct amdgpu_device *adev)  {
>          adev->jpeg.inst->ring_dec->funcs = &jpeg_v5_0_0_dec_ring_vm_funcs;
> -       DRM_DEV_INFO(adev->dev, "JPEG decode is enabled in VM mode\n");
>   }
>
>   static const struct amdgpu_irq_src_funcs jpeg_v5_0_0_irq_funcs = { diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c
> index 36d4ca645c56..070b56610c7d 100644
> --- a/drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c
> @@ -200,16 +200,10 @@ static int vcn_v5_0_0_hw_init(void *handle)
>
>                  r = amdgpu_ring_test_helper(ring);
>                  if (r)
> -                       goto done;
> +                       return r;
>          }
>   [Ruijing] Are we assuming the hw init process always be successful?

No - it could fail with errors and in this case the top level will 
report error. Otherwise it will succeed(and no need to report successful 
message).

David

>          return 0;
> -done:
> -       if (!r)
> -               DRM_INFO("VCN decode and encode initialized successfully(under %s).\n",
> -                       (adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG)?"DPG Mode":"SPG Mode");
> -
> -       return r;
>   }
>
>   /**
> @@ -1122,8 +1116,6 @@ static void vcn_v5_0_0_set_unified_ring_funcs(struct amdgpu_device *adev)
>
>                  adev->vcn.inst[i].ring_enc[0].funcs = &vcn_v5_0_0_unified_ring_vm_funcs;
>                  adev->vcn.inst[i].ring_enc[0].me = i;
> -
> -               DRM_INFO("VCN(%d) encode/decode are enabled in VM mode\n", i);
>          }
>   }
>
> --
> 2.34.1
>