[PATCH 07/17] drm/amd/display: Fix brightness level not retained over reboot
Mohamed, Zaeem
Zaeem.Mohamed at amd.com
Fri Nov 1 19:48:10 UTC 2024
[AMD Official Use Only - AMD Internal Distribution Only]
Hi Mario,
Do I need to re-send the patch to amd-gfx after the tags have been added or is sending upstream enough?
Zaeem
-----Original Message-----
From: Limonciello, Mario <Mario.Limonciello at amd.com>
Sent: Friday, November 1, 2024 11:43 AM
To: Mohamed, Zaeem <Zaeem.Mohamed at amd.com>; amd-gfx at lists.freedesktop.org
Cc: Wentland, Harry <Harry.Wentland at amd.com>; Li, Sun peng (Leo) <Sunpeng.Li at amd.com>; Siqueira, Rodrigo <Rodrigo.Siqueira at amd.com>; Mahfooz, Hamza <Hamza.Mahfooz at amd.com>; Pillai, Aurabindo <Aurabindo.Pillai at amd.com>; Li, Roman <Roman.Li at amd.com>; Lin, Wayne <Wayne.Lin at amd.com>; Chung, ChiaHsuan (Tom) <ChiaHsuan.Chung at amd.com>; Zuo, Jerry <Jerry.Zuo at amd.com>; Chiu, Solomon <Solomon.Chiu at amd.com>; Wheeler, Daniel <Daniel.Wheeler at amd.com>; mark.herbert42 at gmail.com
Subject: Re: [PATCH 07/17] drm/amd/display: Fix brightness level not retained over reboot
On 11/1/2024 08:49, Zaeem Mohamed wrote:
> From: Tom Chung <chiahsuan.chung at amd.com>
>
> [Why]
> During boot up and resume the DC layer will reset the panel brightness
> to fix a flicker issue.
>
> It will cause the dm->actual_brightness is not the current panel
> brightness level. (the dm->brightness is the correct panel level)
>
> [How]
> Set the backlight level after do the set mode.
>
> Reviewed-by: Sun peng Li <sunpeng.li at amd.com>
> Signed-off-by: Tom Chung <chiahsuan.chung at amd.com>
> Signed-off-by: Zaeem Mohamed <zaeem.mohamed at amd.com>
Some more tags, please explicitly add these while merging.
Cc: stable at vger.kernel.org
Fixes: d9e865826c20 ("drm/amd/display: Simplify brightness initialization")
Reported-by: Mark Herbert <mark.herbert42 at gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3655
> ---
> drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index bbfc47f6595f..2599a99509de 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -9411,6 +9411,7 @@ static void amdgpu_dm_commit_streams(struct drm_atomic_state *state,
> bool mode_set_reset_required = false;
> u32 i;
> struct dc_commit_streams_params params = {dc_state->streams,
> dc_state->stream_count};
> + bool set_backlight_level = false;
>
> /* Disable writeback */
> for_each_old_connector_in_state(state, connector, old_con_state, i)
> { @@ -9530,6 +9531,7 @@ static void amdgpu_dm_commit_streams(struct drm_atomic_state *state,
> acrtc->hw_mode = new_crtc_state->mode;
> crtc->hwmode = new_crtc_state->mode;
> mode_set_reset_required = true;
> + set_backlight_level = true;
> } else if (modereset_required(new_crtc_state)) {
> drm_dbg_atomic(dev,
> "Atomic commit: RESET. crtc id %d:[%p]\n", @@ -9581,6
> +9583,19 @@ static void amdgpu_dm_commit_streams(struct drm_atomic_state *state,
> acrtc->otg_inst = status->primary_otg_inst;
> }
> }
> +
> + /* During boot up and resume the DC layer will reset the panel brightness
> + * to fix a flicker issue.
> + * It will cause the dm->actual_brightness is not the current panel brightness
> + * level. (the dm->brightness is the correct panel level)
> + * So we set the backlight level with dm->brightness value after set mode
> + */
> + if (set_backlight_level) {
> + for (i = 0; i < dm->num_of_edps; i++) {
> + if (dm->backlight_dev[i])
> + amdgpu_dm_backlight_set_level(dm, i, dm->brightness[i]);
> + }
> + }
> }
>
> static void dm_set_writeback(struct amdgpu_display_manager *dm,
More information about the amd-gfx
mailing list