[PATCH 2/2] drm/amdgpu: Enable per-queue reset support

[jesse.zhang at amd.com]

From: "Jesse.zhang at amd.com" <Jesse.zhang at amd.com>

This patch updates the SDMA v4.4.2 software initialization to enable per-queue
reset support when the MEC firmware version is 0xb0 or higher and the PMFW
supports SDMA reset.

The following changes are included:
- Added a condition to check if the MEC firmware version is at least 0xb0 and if
  the PMFW supports SDMA reset using `amdgpu_dpm_reset_sdma_is_supported`.
- If both conditions are met, the `AMDGPU_RESET_TYPE_PER_QUEUE` flag is set in
  `adev->sdma.supported_reset`.

Suggested-by: Jonathan Kim <Jonathan.Kim at amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak at amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c
index b24a1ff5d743..e01d97b96655 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c
@@ -1481,9 +1481,10 @@ static int sdma_v4_4_2_sw_init(struct amdgpu_ip_block *ip_block)
 		}
 	}
 
-	/* TODO: Add queue reset mask when FW fully supports it */
 	adev->sdma.supported_reset =
 		amdgpu_get_soft_full_reset_mask(&adev->sdma.instance[0].ring);
+	if (adev->gfx.mec_fw_version >= 0xb0 && amdgpu_dpm_reset_sdma_is_supported(adev))
+		adev->sdma.supported_reset |= AMDGPU_RESET_TYPE_PER_QUEUE;
 
 	if (amdgpu_sdma_ras_sw_init(adev)) {
 		dev_err(adev->dev, "fail to initialize sdma ras block\n");
-- 
2.25.1