[PATCH 09/24] drm/amd/display: Add support to configure CRC window on specific CRC instance

Tom Chung chiahsuan.chung at amd.com
Tue Jan 7 15:28:40 UTC 2025


From: Wayne Lin <Wayne.Lin at amd.com>

[Why]
Have the need to specify the CRC window on specific CRC engine.
dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always
resets CRC engine at first.

[How]
Add index parameter to dc_stream_configure_crc() for selecting the desired crc
engine. Additionally, add another parameter to specify whether to skip the
default reset of crc engine.

Reviewed-by: HaoPing Liu <haoping.liu at amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin at amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung at amd.com>
---
 .../drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c |   2 +-
 drivers/gpu/drm/amd/display/dc/core/dc.c      |  11 +-
 drivers/gpu/drm/amd/display/dc/dc_stream.h    |   4 +-
 .../dc/dce110/dce110_timing_generator.c       | 169 ++++++++++++------
 .../dc/dce120/dce120_timing_generator.c       |  90 +++++++---
 .../amd/display/dc/inc/hw/timing_generator.h  |   3 +
 .../amd/display/dc/optc/dcn10/dcn10_optc.c    |  86 ++++++---
 .../amd/display/dc/optc/dcn35/dcn35_optc.c    | 101 ++++++++---
 8 files changed, 329 insertions(+), 137 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c
index 7c15082c92ed..a2e36b882a4f 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c
@@ -510,7 +510,7 @@ int amdgpu_dm_crtc_configure_crc_source(struct drm_crtc *crtc,
 	/* Enable or disable CRTC CRC generation */
 	if (dm_is_crc_source_crtc(source) || source == AMDGPU_DM_PIPE_CRC_SOURCE_NONE) {
 		if (!dc_stream_configure_crc(stream_state->ctx->dc,
-					     stream_state, NULL, enable, enable)) {
+					     stream_state, NULL, enable, enable, 0, true)) {
 			ret = -EINVAL;
 			goto unlock;
 		}
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index cb6293d8ba77..cecaadf741ad 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -687,15 +687,17 @@ dc_stream_forward_multiple_crc_window(struct dc_stream_state *stream,
  * @enable: Enable CRC if true, disable otherwise.
  * @continuous: Capture CRC on every frame if true. Otherwise, only capture
  *              once.
+ * @idx: Capture CRC on which CRC engine instance
+ * @reset: Reset CRC engine before the configuration
  *
- * By default, only CRC0 is configured, and the entire frame is used to
- * calculate the CRC.
+ * By default, the entire frame is used to calculate the CRC.
  *
  * Return: %false if the stream is not found or CRC capture is not supported;
  *         %true if the stream has been configured.
  */
 bool dc_stream_configure_crc(struct dc *dc, struct dc_stream_state *stream,
-			     struct crc_params *crc_window, bool enable, bool continuous)
+			     struct crc_params *crc_window, bool enable, bool continuous,
+			     uint8_t idx, bool reset)
 {
 	struct pipe_ctx *pipe;
 	struct crc_params param;
@@ -739,6 +741,9 @@ bool dc_stream_configure_crc(struct dc *dc, struct dc_stream_state *stream,
 	param.continuous_mode = continuous;
 	param.enable = enable;
 
+	param.crc_eng_inst = idx;
+	param.reset = reset;
+
 	tg = pipe->stream_res.tg;
 
 	/* Only call if supported */
diff --git a/drivers/gpu/drm/amd/display/dc/dc_stream.h b/drivers/gpu/drm/amd/display/dc/dc_stream.h
index dbf0832eb706..3e303c7808fb 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_stream.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_stream.h
@@ -550,7 +550,9 @@ bool dc_stream_configure_crc(struct dc *dc,
 			     struct dc_stream_state *stream,
 			     struct crc_params *crc_window,
 			     bool enable,
-			     bool continuous);
+			     bool continuous,
+			     uint8_t idx,
+			     bool reset);
 
 bool dc_stream_get_crc(struct dc *dc,
 		       struct dc_stream_state *stream,
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_timing_generator.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_timing_generator.c
index e32dd96a99cb..61b0807693fb 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_timing_generator.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_timing_generator.c
@@ -2127,65 +2127,126 @@ bool dce110_configure_crc(struct timing_generator *tg,
 
 	cntl_addr = CRTC_REG(mmCRTC_CRC_CNTL);
 
-	/* First, disable CRC before we configure it. */
-	dm_write_reg(tg->ctx, cntl_addr, 0);
+	if (!params->enable || params->reset)
+		/* First, disable CRC before we configure it. */
+		dm_write_reg(tg->ctx, cntl_addr, 0);
 
 	if (!params->enable)
 		return true;
 
 	/* Program frame boundaries */
-	/* Window A x axis start and end. */
-	value = 0;
-	addr = CRTC_REG(mmCRTC_CRC0_WINDOWA_X_CONTROL);
-	set_reg_field_value(value, params->windowa_x_start,
-			    CRTC_CRC0_WINDOWA_X_CONTROL,
-			    CRTC_CRC0_WINDOWA_X_START);
-	set_reg_field_value(value, params->windowa_x_end,
-			    CRTC_CRC0_WINDOWA_X_CONTROL,
-			    CRTC_CRC0_WINDOWA_X_END);
-	dm_write_reg(tg->ctx, addr, value);
-
-	/* Window A y axis start and end. */
-	value = 0;
-	addr = CRTC_REG(mmCRTC_CRC0_WINDOWA_Y_CONTROL);
-	set_reg_field_value(value, params->windowa_y_start,
-			    CRTC_CRC0_WINDOWA_Y_CONTROL,
-			    CRTC_CRC0_WINDOWA_Y_START);
-	set_reg_field_value(value, params->windowa_y_end,
-			    CRTC_CRC0_WINDOWA_Y_CONTROL,
-			    CRTC_CRC0_WINDOWA_Y_END);
-	dm_write_reg(tg->ctx, addr, value);
-
-	/* Window B x axis start and end. */
-	value = 0;
-	addr = CRTC_REG(mmCRTC_CRC0_WINDOWB_X_CONTROL);
-	set_reg_field_value(value, params->windowb_x_start,
-			    CRTC_CRC0_WINDOWB_X_CONTROL,
-			    CRTC_CRC0_WINDOWB_X_START);
-	set_reg_field_value(value, params->windowb_x_end,
-			    CRTC_CRC0_WINDOWB_X_CONTROL,
-			    CRTC_CRC0_WINDOWB_X_END);
-	dm_write_reg(tg->ctx, addr, value);
-
-	/* Window B y axis start and end. */
-	value = 0;
-	addr = CRTC_REG(mmCRTC_CRC0_WINDOWB_Y_CONTROL);
-	set_reg_field_value(value, params->windowb_y_start,
-			    CRTC_CRC0_WINDOWB_Y_CONTROL,
-			    CRTC_CRC0_WINDOWB_Y_START);
-	set_reg_field_value(value, params->windowb_y_end,
-			    CRTC_CRC0_WINDOWB_Y_CONTROL,
-			    CRTC_CRC0_WINDOWB_Y_END);
-	dm_write_reg(tg->ctx, addr, value);
-
-	/* Set crc mode and selection, and enable. Only using CRC0*/
-	value = 0;
-	set_reg_field_value(value, params->continuous_mode ? 1 : 0,
-			    CRTC_CRC_CNTL, CRTC_CRC_CONT_EN);
-	set_reg_field_value(value, params->selection,
-			    CRTC_CRC_CNTL, CRTC_CRC0_SELECT);
-	set_reg_field_value(value, 1, CRTC_CRC_CNTL, CRTC_CRC_EN);
-	dm_write_reg(tg->ctx, cntl_addr, value);
+	switch (params->crc_eng_inst) {
+	case 0:
+		/* Window A x axis start and end. */
+		value = 0;
+		addr = CRTC_REG(mmCRTC_CRC0_WINDOWA_X_CONTROL);
+		set_reg_field_value(value, params->windowa_x_start,
+				    CRTC_CRC0_WINDOWA_X_CONTROL,
+				    CRTC_CRC0_WINDOWA_X_START);
+		set_reg_field_value(value, params->windowa_x_end,
+				    CRTC_CRC0_WINDOWA_X_CONTROL,
+				    CRTC_CRC0_WINDOWA_X_END);
+		dm_write_reg(tg->ctx, addr, value);
+
+		/* Window A y axis start and end. */
+		value = 0;
+		addr = CRTC_REG(mmCRTC_CRC0_WINDOWA_Y_CONTROL);
+		set_reg_field_value(value, params->windowa_y_start,
+				    CRTC_CRC0_WINDOWA_Y_CONTROL,
+				    CRTC_CRC0_WINDOWA_Y_START);
+		set_reg_field_value(value, params->windowa_y_end,
+				    CRTC_CRC0_WINDOWA_Y_CONTROL,
+				    CRTC_CRC0_WINDOWA_Y_END);
+		dm_write_reg(tg->ctx, addr, value);
+
+		/* Window B x axis start and end. */
+		value = 0;
+		addr = CRTC_REG(mmCRTC_CRC0_WINDOWB_X_CONTROL);
+		set_reg_field_value(value, params->windowb_x_start,
+				    CRTC_CRC0_WINDOWB_X_CONTROL,
+				    CRTC_CRC0_WINDOWB_X_START);
+		set_reg_field_value(value, params->windowb_x_end,
+				    CRTC_CRC0_WINDOWB_X_CONTROL,
+				    CRTC_CRC0_WINDOWB_X_END);
+		dm_write_reg(tg->ctx, addr, value);
+
+		/* Window B y axis start and end. */
+		value = 0;
+		addr = CRTC_REG(mmCRTC_CRC0_WINDOWB_Y_CONTROL);
+		set_reg_field_value(value, params->windowb_y_start,
+				    CRTC_CRC0_WINDOWB_Y_CONTROL,
+				    CRTC_CRC0_WINDOWB_Y_START);
+		set_reg_field_value(value, params->windowb_y_end,
+				    CRTC_CRC0_WINDOWB_Y_CONTROL,
+				    CRTC_CRC0_WINDOWB_Y_END);
+		dm_write_reg(tg->ctx, addr, value);
+
+		/* Set crc mode and selection, and enable.*/
+		value = 0;
+		set_reg_field_value(value, params->continuous_mode ? 1 : 0,
+				    CRTC_CRC_CNTL, CRTC_CRC_CONT_EN);
+		set_reg_field_value(value, params->selection,
+				    CRTC_CRC_CNTL, CRTC_CRC0_SELECT);
+		set_reg_field_value(value, 1, CRTC_CRC_CNTL, CRTC_CRC_EN);
+		dm_write_reg(tg->ctx, cntl_addr, value);
+		break;
+	case 1:
+		/* Window A x axis start and end. */
+		value = 0;
+		addr = CRTC_REG(mmCRTC_CRC1_WINDOWA_X_CONTROL);
+		set_reg_field_value(value, params->windowa_x_start,
+				    CRTC_CRC1_WINDOWA_X_CONTROL,
+				    CRTC_CRC1_WINDOWA_X_START);
+		set_reg_field_value(value, params->windowa_x_end,
+				    CRTC_CRC1_WINDOWA_X_CONTROL,
+				    CRTC_CRC1_WINDOWA_X_END);
+		dm_write_reg(tg->ctx, addr, value);
+
+		/* Window A y axis start and end. */
+		value = 0;
+		addr = CRTC_REG(mmCRTC_CRC1_WINDOWA_Y_CONTROL);
+		set_reg_field_value(value, params->windowa_y_start,
+				    CRTC_CRC1_WINDOWA_Y_CONTROL,
+				    CRTC_CRC1_WINDOWA_Y_START);
+		set_reg_field_value(value, params->windowa_y_end,
+				    CRTC_CRC1_WINDOWA_Y_CONTROL,
+				    CRTC_CRC1_WINDOWA_Y_END);
+		dm_write_reg(tg->ctx, addr, value);
+
+		/* Window B x axis start and end. */
+		value = 0;
+		addr = CRTC_REG(mmCRTC_CRC1_WINDOWB_X_CONTROL);
+		set_reg_field_value(value, params->windowb_x_start,
+				    CRTC_CRC1_WINDOWB_X_CONTROL,
+				    CRTC_CRC1_WINDOWB_X_START);
+		set_reg_field_value(value, params->windowb_x_end,
+				    CRTC_CRC1_WINDOWB_X_CONTROL,
+				    CRTC_CRC1_WINDOWB_X_END);
+		dm_write_reg(tg->ctx, addr, value);
+
+		/* Window B y axis start and end. */
+		value = 0;
+		addr = CRTC_REG(mmCRTC_CRC1_WINDOWB_Y_CONTROL);
+		set_reg_field_value(value, params->windowb_y_start,
+				    CRTC_CRC1_WINDOWB_Y_CONTROL,
+				    CRTC_CRC1_WINDOWB_Y_START);
+		set_reg_field_value(value, params->windowb_y_end,
+				    CRTC_CRC1_WINDOWB_Y_CONTROL,
+				    CRTC_CRC1_WINDOWB_Y_END);
+		dm_write_reg(tg->ctx, addr, value);
+
+		/* Set crc mode and selection, and enable.*/
+		value = 0;
+		set_reg_field_value(value, params->continuous_mode ? 1 : 0,
+				    CRTC_CRC_CNTL, CRTC_CRC_CONT_EN);
+		set_reg_field_value(value, params->selection,
+				    CRTC_CRC_CNTL, CRTC_CRC1_SELECT);
+		set_reg_field_value(value, 1, CRTC_CRC_CNTL, CRTC_CRC_EN);
+		dm_write_reg(tg->ctx, cntl_addr, value);
+		break;
+	default:
+		return false;
+	}
 
 	return true;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/dce120/dce120_timing_generator.c b/drivers/gpu/drm/amd/display/dc/dce120/dce120_timing_generator.c
index 4984adce077e..31c4f44ceaac 100644
--- a/drivers/gpu/drm/amd/display/dc/dce120/dce120_timing_generator.c
+++ b/drivers/gpu/drm/amd/display/dc/dce120/dce120_timing_generator.c
@@ -1100,39 +1100,73 @@ static bool dce120_configure_crc(struct timing_generator *tg,
 	if (!dce120_is_tg_enabled(tg))
 		return false;
 
-	/* First, disable CRC before we configure it. */
-	dm_write_reg_soc15(tg->ctx, mmCRTC0_CRTC_CRC_CNTL,
-			   tg110->offsets.crtc, 0);
+	if (!params->enable || params->reset)
+		/* First, disable CRC before we configure it. */
+		dm_write_reg_soc15(tg->ctx, mmCRTC0_CRTC_CRC_CNTL,
+				   tg110->offsets.crtc, 0);
 
 	if (!params->enable)
 		return true;
 
 	/* Program frame boundaries */
-	/* Window A x axis start and end. */
-	CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC0_WINDOWA_X_CONTROL,
-			  CRTC_CRC0_WINDOWA_X_START, params->windowa_x_start,
-			  CRTC_CRC0_WINDOWA_X_END, params->windowa_x_end);
-
-	/* Window A y axis start and end. */
-	CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC0_WINDOWA_Y_CONTROL,
-			  CRTC_CRC0_WINDOWA_Y_START, params->windowa_y_start,
-			  CRTC_CRC0_WINDOWA_Y_END, params->windowa_y_end);
-
-	/* Window B x axis start and end. */
-	CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC0_WINDOWB_X_CONTROL,
-			  CRTC_CRC0_WINDOWB_X_START, params->windowb_x_start,
-			  CRTC_CRC0_WINDOWB_X_END, params->windowb_x_end);
-
-	/* Window B y axis start and end. */
-	CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC0_WINDOWB_Y_CONTROL,
-			  CRTC_CRC0_WINDOWB_Y_START, params->windowb_y_start,
-			  CRTC_CRC0_WINDOWB_Y_END, params->windowb_y_end);
-
-	/* Set crc mode and selection, and enable. Only using CRC0*/
-	CRTC_REG_UPDATE_3(CRTC0_CRTC_CRC_CNTL,
-			  CRTC_CRC_EN, params->continuous_mode ? 1 : 0,
-			  CRTC_CRC0_SELECT, params->selection,
-			  CRTC_CRC_EN, 1);
+	switch (params->crc_eng_inst) {
+	case 0:
+		/* Window A x axis start and end. */
+		CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC0_WINDOWA_X_CONTROL,
+				  CRTC_CRC0_WINDOWA_X_START, params->windowa_x_start,
+				  CRTC_CRC0_WINDOWA_X_END, params->windowa_x_end);
+
+		/* Window A y axis start and end. */
+		CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC0_WINDOWA_Y_CONTROL,
+				  CRTC_CRC0_WINDOWA_Y_START, params->windowa_y_start,
+				  CRTC_CRC0_WINDOWA_Y_END, params->windowa_y_end);
+
+		/* Window B x axis start and end. */
+		CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC0_WINDOWB_X_CONTROL,
+				  CRTC_CRC0_WINDOWB_X_START, params->windowb_x_start,
+				  CRTC_CRC0_WINDOWB_X_END, params->windowb_x_end);
+
+		/* Window B y axis start and end. */
+		CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC0_WINDOWB_Y_CONTROL,
+				  CRTC_CRC0_WINDOWB_Y_START, params->windowb_y_start,
+				  CRTC_CRC0_WINDOWB_Y_END, params->windowb_y_end);
+
+		/* Set crc mode and selection, and enable.*/
+		CRTC_REG_UPDATE_3(CRTC0_CRTC_CRC_CNTL,
+				  CRTC_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
+				  CRTC_CRC0_SELECT, params->selection,
+				  CRTC_CRC_EN, 1);
+		break;
+	case 1:
+		/* Window A x axis start and end. */
+		CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC1_WINDOWA_X_CONTROL,
+				  CRTC_CRC1_WINDOWA_X_START, params->windowa_x_start,
+				  CRTC_CRC1_WINDOWA_X_END, params->windowa_x_end);
+
+		/* Window A y axis start and end. */
+		CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC1_WINDOWA_Y_CONTROL,
+				  CRTC_CRC1_WINDOWA_Y_START, params->windowa_y_start,
+				  CRTC_CRC1_WINDOWA_Y_END, params->windowa_y_end);
+
+		/* Window B x axis start and end. */
+		CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC1_WINDOWB_X_CONTROL,
+				  CRTC_CRC1_WINDOWB_X_START, params->windowb_x_start,
+				  CRTC_CRC1_WINDOWB_X_END, params->windowb_x_end);
+
+		/* Window B y axis start and end. */
+		CRTC_REG_UPDATE_2(CRTC0_CRTC_CRC1_WINDOWB_Y_CONTROL,
+				  CRTC_CRC1_WINDOWB_Y_START, params->windowb_y_start,
+				  CRTC_CRC1_WINDOWB_Y_END, params->windowb_y_end);
+
+		/* Set crc mode and selection, and enable */
+		CRTC_REG_UPDATE_3(CRTC0_CRTC_CRC_CNTL,
+				  CRTC_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
+				  CRTC_CRC1_SELECT, params->selection,
+				  CRTC_CRC_EN, 1);
+		break;
+	default:
+		return false;
+	}
 
 	return true;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
index 4807b9f9f5a5..9885cb3c310f 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
@@ -141,6 +141,9 @@ struct crc_params {
 
 	bool continuous_mode;
 	bool enable;
+
+	uint8_t crc_eng_inst;
+	bool reset;
 };
 
 /**
diff --git a/drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.c b/drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.c
index a296bb89b106..19d5ebc6763c 100644
--- a/drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.c
@@ -1470,37 +1470,71 @@ bool optc1_configure_crc(struct timing_generator *optc,
 	if (!optc1_is_tg_enabled(optc))
 		return false;
 
-	REG_WRITE(OTG_CRC_CNTL, 0);
+	if (!params->enable || params->reset)
+		REG_WRITE(OTG_CRC_CNTL, 0);
 
 	if (!params->enable)
 		return true;
 
 	/* Program frame boundaries */
-	/* Window A x axis start and end. */
-	REG_UPDATE_2(OTG_CRC0_WINDOWA_X_CONTROL,
-			OTG_CRC0_WINDOWA_X_START, params->windowa_x_start,
-			OTG_CRC0_WINDOWA_X_END, params->windowa_x_end);
-
-	/* Window A y axis start and end. */
-	REG_UPDATE_2(OTG_CRC0_WINDOWA_Y_CONTROL,
-			OTG_CRC0_WINDOWA_Y_START, params->windowa_y_start,
-			OTG_CRC0_WINDOWA_Y_END, params->windowa_y_end);
-
-	/* Window B x axis start and end. */
-	REG_UPDATE_2(OTG_CRC0_WINDOWB_X_CONTROL,
-			OTG_CRC0_WINDOWB_X_START, params->windowb_x_start,
-			OTG_CRC0_WINDOWB_X_END, params->windowb_x_end);
-
-	/* Window B y axis start and end. */
-	REG_UPDATE_2(OTG_CRC0_WINDOWB_Y_CONTROL,
-			OTG_CRC0_WINDOWB_Y_START, params->windowb_y_start,
-			OTG_CRC0_WINDOWB_Y_END, params->windowb_y_end);
-
-	/* Set crc mode and selection, and enable. Only using CRC0*/
-	REG_UPDATE_3(OTG_CRC_CNTL,
-			OTG_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
-			OTG_CRC0_SELECT, params->selection,
-			OTG_CRC_EN, 1);
+	switch (params->crc_eng_inst) {
+	case 0:
+		/* Window A x axis start and end. */
+		REG_UPDATE_2(OTG_CRC0_WINDOWA_X_CONTROL,
+				OTG_CRC0_WINDOWA_X_START, params->windowa_x_start,
+				OTG_CRC0_WINDOWA_X_END, params->windowa_x_end);
+
+		/* Window A y axis start and end. */
+		REG_UPDATE_2(OTG_CRC0_WINDOWA_Y_CONTROL,
+				OTG_CRC0_WINDOWA_Y_START, params->windowa_y_start,
+				OTG_CRC0_WINDOWA_Y_END, params->windowa_y_end);
+
+		/* Window B x axis start and end. */
+		REG_UPDATE_2(OTG_CRC0_WINDOWB_X_CONTROL,
+				OTG_CRC0_WINDOWB_X_START, params->windowb_x_start,
+				OTG_CRC0_WINDOWB_X_END, params->windowb_x_end);
+
+		/* Window B y axis start and end. */
+		REG_UPDATE_2(OTG_CRC0_WINDOWB_Y_CONTROL,
+				OTG_CRC0_WINDOWB_Y_START, params->windowb_y_start,
+				OTG_CRC0_WINDOWB_Y_END, params->windowb_y_end);
+
+		/* Set crc mode and selection, and enable.*/
+		REG_UPDATE_3(OTG_CRC_CNTL,
+				OTG_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
+				OTG_CRC0_SELECT, params->selection,
+				OTG_CRC_EN, 1);
+		break;
+	case 1:
+		/* Window A x axis start and end. */
+		REG_UPDATE_2(OTG_CRC1_WINDOWA_X_CONTROL,
+				OTG_CRC1_WINDOWA_X_START, params->windowa_x_start,
+				OTG_CRC1_WINDOWA_X_END, params->windowa_x_end);
+
+		/* Window A y axis start and end. */
+		REG_UPDATE_2(OTG_CRC1_WINDOWA_Y_CONTROL,
+				OTG_CRC1_WINDOWA_Y_START, params->windowa_y_start,
+				OTG_CRC1_WINDOWA_Y_END, params->windowa_y_end);
+
+		/* Window B x axis start and end. */
+		REG_UPDATE_2(OTG_CRC1_WINDOWB_X_CONTROL,
+				OTG_CRC1_WINDOWB_X_START, params->windowb_x_start,
+				OTG_CRC1_WINDOWB_X_END, params->windowb_x_end);
+
+		/* Window B y axis start and end. */
+		REG_UPDATE_2(OTG_CRC1_WINDOWB_Y_CONTROL,
+				OTG_CRC1_WINDOWB_Y_START, params->windowb_y_start,
+				OTG_CRC1_WINDOWB_Y_END, params->windowb_y_end);
+
+		/* Set crc mode and selection, and enable.*/
+		REG_UPDATE_3(OTG_CRC_CNTL,
+				OTG_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
+				OTG_CRC1_SELECT, params->selection,
+				OTG_CRC_EN, 1);
+		break;
+	default:
+		return false;
+	}
 
 	return true;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/optc/dcn35/dcn35_optc.c b/drivers/gpu/drm/amd/display/dc/optc/dcn35/dcn35_optc.c
index dfa9364fe5a6..d21e82b927d0 100644
--- a/drivers/gpu/drm/amd/display/dc/optc/dcn35/dcn35_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/optc/dcn35/dcn35_optc.c
@@ -183,34 +183,87 @@ static bool optc35_configure_crc(struct timing_generator *optc,
 {
 	struct optc *optc1 = DCN10TG_FROM_TG(optc);
 
+	/* Cannot configure crc on a CRTC that is disabled */
 	if (!optc1_is_tg_enabled(optc))
 		return false;
-	REG_WRITE(OTG_CRC_CNTL, 0);
+
+	if (!params->enable || params->reset)
+		REG_WRITE(OTG_CRC_CNTL, 0);
+
 	if (!params->enable)
 		return true;
-	REG_UPDATE_2(OTG_CRC0_WINDOWA_X_CONTROL,
-			OTG_CRC0_WINDOWA_X_START, params->windowa_x_start,
-			OTG_CRC0_WINDOWA_X_END, params->windowa_x_end);
-	REG_UPDATE_2(OTG_CRC0_WINDOWA_Y_CONTROL,
-			OTG_CRC0_WINDOWA_Y_START, params->windowa_y_start,
-			OTG_CRC0_WINDOWA_Y_END, params->windowa_y_end);
-	REG_UPDATE_2(OTG_CRC0_WINDOWB_X_CONTROL,
-			OTG_CRC0_WINDOWB_X_START, params->windowb_x_start,
-			OTG_CRC0_WINDOWB_X_END, params->windowb_x_end);
-	REG_UPDATE_2(OTG_CRC0_WINDOWB_Y_CONTROL,
-			OTG_CRC0_WINDOWB_Y_START, params->windowb_y_start,
-			OTG_CRC0_WINDOWB_Y_END, params->windowb_y_end);
-	if (optc1->base.ctx->dc->debug.otg_crc_db && optc1->tg_mask->OTG_CRC_WINDOW_DB_EN != 0) {
-		REG_UPDATE_4(OTG_CRC_CNTL,
-				OTG_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
-				OTG_CRC0_SELECT, params->selection,
-				OTG_CRC_EN, 1,
-				OTG_CRC_WINDOW_DB_EN, 1);
-	} else
-		REG_UPDATE_3(OTG_CRC_CNTL,
-				OTG_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
-				OTG_CRC0_SELECT, params->selection,
-				OTG_CRC_EN, 1);
+
+	/* Program frame boundaries */
+	switch (params->crc_eng_inst) {
+	case 0:
+		/* Window A x axis start and end. */
+		REG_UPDATE_2(OTG_CRC0_WINDOWA_X_CONTROL,
+				OTG_CRC0_WINDOWA_X_START, params->windowa_x_start,
+				OTG_CRC0_WINDOWA_X_END, params->windowa_x_end);
+
+		/* Window A y axis start and end. */
+		REG_UPDATE_2(OTG_CRC0_WINDOWA_Y_CONTROL,
+				OTG_CRC0_WINDOWA_Y_START, params->windowa_y_start,
+				OTG_CRC0_WINDOWA_Y_END, params->windowa_y_end);
+
+		/* Window B x axis start and end. */
+		REG_UPDATE_2(OTG_CRC0_WINDOWB_X_CONTROL,
+				OTG_CRC0_WINDOWB_X_START, params->windowb_x_start,
+				OTG_CRC0_WINDOWB_X_END, params->windowb_x_end);
+
+		/* Window B y axis start and end. */
+		REG_UPDATE_2(OTG_CRC0_WINDOWB_Y_CONTROL,
+				OTG_CRC0_WINDOWB_Y_START, params->windowb_y_start,
+				OTG_CRC0_WINDOWB_Y_END, params->windowb_y_end);
+
+		if (optc1->base.ctx->dc->debug.otg_crc_db && optc1->tg_mask->OTG_CRC_WINDOW_DB_EN != 0)
+			REG_UPDATE_4(OTG_CRC_CNTL,
+					OTG_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
+					OTG_CRC0_SELECT, params->selection,
+					OTG_CRC_EN, 1,
+					OTG_CRC_WINDOW_DB_EN, 1);
+		else
+			REG_UPDATE_3(OTG_CRC_CNTL,
+					OTG_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
+					OTG_CRC0_SELECT, params->selection,
+					OTG_CRC_EN, 1);
+		break;
+	case 1:
+		/* Window A x axis start and end. */
+		REG_UPDATE_2(OTG_CRC1_WINDOWA_X_CONTROL,
+				OTG_CRC1_WINDOWA_X_START, params->windowa_x_start,
+				OTG_CRC1_WINDOWA_X_END, params->windowa_x_end);
+
+		/* Window A y axis start and end. */
+		REG_UPDATE_2(OTG_CRC1_WINDOWA_Y_CONTROL,
+				OTG_CRC1_WINDOWA_Y_START, params->windowa_y_start,
+				OTG_CRC1_WINDOWA_Y_END, params->windowa_y_end);
+
+		/* Window B x axis start and end. */
+		REG_UPDATE_2(OTG_CRC1_WINDOWB_X_CONTROL,
+				OTG_CRC1_WINDOWB_X_START, params->windowb_x_start,
+				OTG_CRC1_WINDOWB_X_END, params->windowb_x_end);
+
+		/* Window B y axis start and end. */
+		REG_UPDATE_2(OTG_CRC1_WINDOWB_Y_CONTROL,
+				OTG_CRC1_WINDOWB_Y_START, params->windowb_y_start,
+				OTG_CRC1_WINDOWB_Y_END, params->windowb_y_end);
+
+		if (optc1->base.ctx->dc->debug.otg_crc_db && optc1->tg_mask->OTG_CRC_WINDOW_DB_EN != 0)
+			REG_UPDATE_4(OTG_CRC_CNTL,
+					OTG_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
+					OTG_CRC1_SELECT, params->selection,
+					OTG_CRC_EN, 1,
+					OTG_CRC_WINDOW_DB_EN, 1);
+		else
+			REG_UPDATE_3(OTG_CRC_CNTL,
+					OTG_CRC_CONT_EN, params->continuous_mode ? 1 : 0,
+					OTG_CRC1_SELECT, params->selection,
+					OTG_CRC_EN, 1);
+		break;
+	default:
+		return false;
+	}
 	return true;
 }
 
-- 
2.34.1



More information about the amd-gfx mailing list