[PATCH 12/18] drm/amd/display: Fix FIXED_VS retimer clock gen source override

[IVAN.LIPSKI at amd.com]

From: Michael Strauss <michael.strauss at amd.com>

[WHY]
For SQ128 pattern some vendor-specific overrides are required.
Previously a hardcoded clock gen source value was incorrectly programmed,
causing our override to retimer's clock source override to be ignored.
Due to some PHY issues on certain APU programs, we see failures on retimer
bypass ports extend to electrical testing downstream of PHY due to some host
clock jitter which the retimer follows.

[HOW]
Fix typo to use correct clock gen source override of 0xC4 rather than 0x4C.

Reviewed-by: Charlene Liu <charlene.liu at amd.com>
Signed-off-by: Michael Strauss <michael.strauss at amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski at amd.com>
---
 .../display/dc/link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.c b/drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.c
index 116ff37126e7..55c5148de800 100644
--- a/drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.c
@@ -74,7 +74,7 @@ static void dp_hpo_fixed_vs_pe_retimer_set_tx_ffe(struct dc_link *link,
 static void dp_hpo_fixed_vs_pe_retimer_program_override_test_pattern(struct dc_link *link,
 		struct encoder_set_dp_phy_pattern_param *tp_params)
 {
-	uint8_t clk_src = 0x4C;
+	uint8_t clk_src = 0xC4;
 	uint8_t pattern = 0x4F; /* SQ128 */
 
 	const uint8_t vendor_lttpr_write_data_pg0[4] = {0x1, 0x11, 0x0, 0x0};
-- 
2.43.0