[PATCH 03/10] drm/amd/display: Use scaling for non-native resolutions on eDP

[Aurabindo Pillai]

From: Mario Limonciello <mario.limonciello at amd.com>

[Why]
Common resolutions are added to supported modes to enable compatibility
scenarios that compositors may use to do things like clone displays. There
is no guarantee however that the panel will natively support these modes.

[How]
If the compositor hasn't enabled scaling but a non-native resolution has
been picked for an eDP panel turn the scaler on anyway.  This will ensure
compatibility.

Reviewed-by: Roman Li <roman.li at amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello at amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai at amd.com>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c    | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index a4e3448e5a2c..12cbfd7ffbc7 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -7891,6 +7891,22 @@ static int dm_encoder_helper_atomic_check(struct drm_encoder *encoder,
 	int clock, bpp = 0;
 	bool is_y420 = false;
 
+	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		struct amdgpu_encoder *amdgpu_encoder = to_amdgpu_encoder(encoder);
+		struct drm_display_mode *native_mode = &amdgpu_encoder->native_mode;
+		enum drm_mode_status result;
+
+		result = drm_crtc_helper_mode_valid_fixed(encoder->crtc, adjusted_mode, native_mode);
+		if (result != MODE_OK && dm_new_connector_state->scaling == RMX_OFF) {
+			drm_dbg_driver(encoder->dev,
+				       "mode %dx%d@%dHz is not native, enabling scaling\n",
+				       adjusted_mode->hdisplay, adjusted_mode->vdisplay,
+				       drm_mode_vrefresh(adjusted_mode));
+			dm_new_connector_state->scaling = RMX_FULL;
+		}
+		return 0;
+	}
+
 	if (!aconnector->mst_output_port)
 		return 0;
 
-- 
2.49.0