[PATCH 1/2] drm/amdgpu: read back DB_CTRL register after written for VCN v4.0.5

[David Wu]

sounds great! will adjust accordingly.

David

On 2025-05-13 12:44, Alex Deucher wrote:
> On Tue, May 13, 2025 at 12:38 PM David (Ming Qiang) Wu
> <David.Wu3 at amd.com> wrote:
>> On VCN v4.0.5 there is a race condition where the WPTR is not
>> updated after starting from idle when doorbell is used. The read-back
>> of regVCN_RB1_DB_CTRL register after written is to ensure the
>> doorbell_index is updated before it can work properly.
>>
>> Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
>> Signed-off-by: David (Ming Qiang) Wu <David.Wu3 at amd.com>
>> ---
>>   drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
>> index ed00d35039c1..d6be8b05d7a2 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c
>> @@ -1033,6 +1033,8 @@ static int vcn_v4_0_5_start_dpg_mode(struct amdgpu_vcn_inst *vinst,
>>          WREG32_SOC15(VCN, inst_idx, regVCN_RB1_DB_CTRL,
>>                          ring->doorbell_index << VCN_RB1_DB_CTRL__OFFSET__SHIFT |
>>                          VCN_RB1_DB_CTRL__EN_MASK);
>> +       /* Read DB_CTRL to flush the write DB_CTRL command. */
>> +       RREG32_SOC15(VCN, inst_idx, regVCN_RB1_DB_CTRL);
>>
>>          return 0;
>>   }
>> @@ -1195,6 +1197,8 @@ static int vcn_v4_0_5_start(struct amdgpu_vcn_inst *vinst)
>>          WREG32_SOC15(VCN, i, regVCN_RB1_DB_CTRL,
>>                       ring->doorbell_index << VCN_RB1_DB_CTRL__OFFSET__SHIFT |
>>                       VCN_RB1_DB_CTRL__EN_MASK);
>> +       /* Read DB_CTRL to flush the write DB_CTRL command. */
>> +       RREG32_SOC15(VCN, i, regVCN_RB1_DB_CTRL);
> You might want to move this one down to the end of the function to
> post the other subsequent writes.  Arguably all of the VCNs should do
> something similar.  If you want to make sure a PCIe write goes
> through, you need to issue a subsequent read.  Doing this at the end
> of each function should post all previous writes.
>
> Alex
>
>>          WREG32_SOC15(VCN, i, regUVD_RB_BASE_LO, ring->gpu_addr);
>>          WREG32_SOC15(VCN, i, regUVD_RB_BASE_HI, upper_32_bits(ring->gpu_addr));
>> --
>> 2.49.0
>>