[PATCH v6 3/4] drm/amdgpu: enable pdb0 for hibernation on SRIOV
Zhang, GuoQing (Sam)
GuoQing.Zhang at amd.com
Wed May 21 11:55:27 UTC 2025
On 2025/5/21 16:06, Christian König wrote:
> On 5/20/25 07:10, Zhang, GuoQing (Sam) wrote:
>>>> + if (amdgpu_virt_xgmi_migrate_enabled(adev)) {
>>>> + /* set mc->vram_start to 0 to switch the returned GPU address of
>>>> + * amdgpu_bo_create_reserved() from FB aperture to GART aperture.
>>>> + */
>>>> + amdgpu_gmc_vram_location(adev, mc, 0);
>>> This function does a lot more than just setting mc->vram_start and mc->vram_end.
>>>
>>> You should probably just update the two setting and not call amdgpu_gmc_vram_location() at all.
>> I tried only setting mc->vram_start and mc->vram_end. But KMD load will
>> fail with following error logs.
>>
>> [ 329.314346] amdgpu 0000:09:00.0: amdgpu: VRAM: 196288M
>> 0x0000000000000000 - 0x0000002FEBFFFFFF (196288M used)
>> [ 329.314348] amdgpu 0000:09:00.0: amdgpu: GART: 512M
>> 0x0000018000000000 - 0x000001801FFFFFFF
>> [ 329.314385] [drm] Detected VRAM RAM=196288M, BAR=262144M
>> [ 329.314386] [drm] RAM width 8192bits HBM
>> [ 329.314546] amdgpu 0000:09:00.0: amdgpu: (-22) failed to allocate
>> kernel bo
>> [ 329.315013] [drm:amdgpu_device_init [amdgpu]] *ERROR* sw_init of IP
>> block <gmc_v9_0> failed -22
>> [ 329.315846] amdgpu 0000:09:00.0: amdgpu: amdgpu_device_ip_init failed
>>
>>
>> It seems like setting mc->visible_vram_size and mc->visible_vram_size
>> fields are also needed. In this case call amdgpu_gmc_vram_location() is
>> better than inline the logic, I think.
> Yeah, exactly that is not a good idea.
>
> The mc->visible_vram_size and mc->real_vram_size should have been initialized by gmc_v9_0_mc_init(). Why didn't that happen?
[Sam] visible_vram_size is set to 0x4000000000 (256G) from
`pci_resource_len(adev->pdev, 0)` in `gmc_v9_0_mc_init()`.
It is set to real_vram_size 0x2fec000000(192G) in
amdgpu_gmc_vram_location().
Should I update the 3 variables inline and not call
amdgpu_gmc_vram_location()?
mc->vram_start = 0;
mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
if (mc->real_vram_size < mc->visible_vram_size)
mc->visible_vram_size = mc->real_vram_size;
>
>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c
>>>> index 84cde1239ee4..18e80aa78aff 100644
>>>> --- a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c
>>>> +++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c
>>>> @@ -45,8 +45,10 @@ static u64 mmhub_v1_8_get_fb_location(struct amdgpu_device *adev)
>>>> top &= MC_VM_FB_LOCATION_TOP__FB_TOP_MASK;
>>>> top <<= 24;
>>>>
>>>> - adev->gmc.fb_start = base;
>>>> - adev->gmc.fb_end = top;
>>>> + if (!amdgpu_virt_xgmi_migrate_enabled(adev)) {
>>>> + adev->gmc.fb_start = base;
>>>> + adev->gmc.fb_end = top;
>>>> + }
>>> We should probably avoid calling this in the first place.
>>>
>>> The function gmc_v9_0_vram_gtt_location() should probably be adjusted.
>> mmhub_v1_8_get_fb_location() is called by the new
>> amdgpu_bo_fb_aper_addr() as well, not just gmc_v9_0_vram_gtt_location().
> Oh, that is probably a bad idea. The function amdgpu_bo_fb_aper_addr() should only rely on cached data.
[Sam] Can I add new `fb_base` field in `struct amdgpu_gmc` to cache the
value of `get_fb_location()`?
Using this approach, we don't need to set fb_start and fb_end on resume
any more, since the reset of the 2 field is caused by
mmhub_v1_8_get_fb_location() calls from amdgpu_bo_fb_aper_addr().
Please see the code change below.
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.h
@@ -259,6 +259,7 @@ struct amdgpu_gmc {
*/
u64 fb_start;
u64 fb_end;
+ u64 fb_base;
unsigned vram_width;
u64 real_vram_size;
int vram_mtrr;
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
@@ -1527,7 +1527,7 @@ u64 amdgpu_bo_fb_aper_addr(struct amdgpu_bo *bo)
WARN_ON_ONCE(bo->tbo.resource->mem_type != TTM_PL_VRAM);
- fb_base = adev->mmhub.funcs->get_fb_location(adev);
+ fb_base = adev->gmc.fb_base;
fb_base += adev->gmc.xgmi.physical_node_id *
adev->gmc.xgmi.node_segment_size;
offset = (bo->tbo.resource->start << PAGE_SHIFT) + fb_base;
return amdgpu_gmc_sign_extend(offset);
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
@@ -1728,6 +1728,7 @@ static void gmc_v9_0_vram_gtt_location(struct
amdgpu_device *adev,
struct amdgpu_gmc *mc)
{
u64 base = adev->mmhub.funcs->get_fb_location(adev);
+ mc->fb_base = base;
/* add the xgmi offset of the physical node */
base += adev->gmc.xgmi.physical_node_id *
adev->gmc.xgmi.node_segment_size;
--- a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c
+++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c
@@ -45,10 +45,8 @@ static u64 mmhub_v1_8_get_fb_location(struct
amdgpu_device *adev)
top &= MC_VM_FB_LOCATION_TOP__FB_TOP_MASK;
top <<= 24;
- if (!amdgpu_virt_xgmi_migrate_enabled(adev)) {
- adev->gmc.fb_start = base;
- adev->gmc.fb_end = top;
- }
+ adev->gmc.fb_start = base;
+ adev->gmc.fb_end = top;
Regards
Sam
>
>> mmhub_v1_8_get_fb_location() is supposed to be a query api according to
>> its name. having such side effect is very surprising.
>>
>> Another approach is set the right fb_start and fb_end in the new
>> amdgpu_virt_resume(), like updating vram_base_offset.
> That is probably better. And skip setting fb_start and fb_end in amdgpu_gmc_sysvm_location() for this use case.
>
> That was done only because we re-program those registers on bare metal.
>
> Regards,
> Christian.
>
>> Which approach do you prefer? Or any better suggestions? Thank you.
>>
>>
>> Regards
>> Sam
>>
>>
>>
>>> Regards,
>>> Christian.
>>>
>>>>
>>>> return base;
>>>> }
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20250521/00223ea7/attachment.htm>
More information about the amd-gfx
mailing list