[PATCH 04/24] drm/amd/display: Support OLED SDR with AMD ABC

[Wayne Lin]

From: Camille Cho <Camille.Cho at amd.com>

[Why]
Nits programming for SDR panel is only supported by VESA ABC.

[How]
1. Loose nits programming for OLED SDR panel with AMD ABC.
2. We support two ABC methods. Disable one before we program the other
   in case panel freaks out.
3. Update HDR judgement in setBR with a solider condition.

Reviewed-by: Krunoslav Kovac <krunoslav.kovac at amd.com>
Signed-off-by: Camille Cho <Camille.Cho at amd.com>
Signed-off-by: Wayne Lin <wayne.lin at amd.com>
---
 .../link/protocols/link_edp_panel_control.c   | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c
index da74c2b5854f..035795042a01 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c
@@ -173,6 +173,15 @@ bool edp_set_backlight_level_nits(struct dc_link *link,
 
 		target_luminance = (struct target_luminance_value *)&backlight_millinits;
 
+		//make sure we disable AMD ABC first.
+		core_link_read_dpcd(link, DP_SOURCE_BACKLIGHT_CONTROL,
+			&backlight_enable, sizeof(uint8_t));
+		if (backlight_enable) {
+			backlight_enable = 0;
+			core_link_write_dpcd(link, DP_SOURCE_BACKLIGHT_CONTROL,
+					&backlight_enable, 1);
+		}
+
 		core_link_read_dpcd(link, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
 			&backlight_enable, sizeof(uint8_t));
 
@@ -193,10 +202,22 @@ bool edp_set_backlight_level_nits(struct dc_link *link,
 		*(uint16_t *)&dpcd_backlight_set.backlight_transition_time_ms = (uint16_t)transition_time_in_ms;
 
 		uint8_t backlight_control = isHDR ? 1 : 0;
+		uint8_t backlight_enable = 0;
+
 		// OLEDs have no PWM, they can only use AUX
 		if (link->dpcd_sink_ext_caps.bits.oled == 1)
 			backlight_control = 1;
 
+		//make sure we disable VESA ABC first.
+		core_link_read_dpcd(link, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
+			&backlight_enable, sizeof(uint8_t));
+
+		if (backlight_enable & DP_EDP_PANEL_LUMINANCE_CONTROL_ENABLE) {
+			backlight_enable &= ~DP_EDP_PANEL_LUMINANCE_CONTROL_ENABLE;
+			core_link_write_dpcd(link, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
+					&backlight_enable, sizeof(backlight_enable));
+		}
+
 		if (core_link_write_dpcd(link, DP_SOURCE_BACKLIGHT_LEVEL,
 			(uint8_t *)(&dpcd_backlight_set),
 			sizeof(dpcd_backlight_set)) != DC_OK)
-- 
2.43.0