[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-862.el7.x86_64 (mockbuild@x86-034.build.eng.bos.redhat.com) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-28) (GCC) ) #1 SMP Wed Mar 21 18:14:51 EDT 2018 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.0-862.el7.x86_64 root=/dev/mapper/rhel-root ro crashkernel=auto rd.lvm.lv=rhel/root rd.lvm.lv=rhel/swap rhgb quiet LANG=en_US.UTF-8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000963ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000096400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cb717fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb718000-0x00000000cb86bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cb86c000-0x00000000cba1bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cba1c000-0x00000000cbb34fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cbb35000-0x00000000cbffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Z420 Workstation/1589, BIOS J61 v03.88 05/27/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x430000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000CC000000 mask 3FFFFC000000 uncachable [ 0.000000] 1 base 0000D0000000 mask 3FFFF0000000 uncachable [ 0.000000] 2 base 0000E0000000 mask 3FFFE0000000 uncachable [ 0.000000] 3 base 000430000000 mask 3FFFF0000000 uncachable [ 0.000000] 4 base 380000000000 mask 3FF000000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC [ 0.000000] e820: last_pfn = 0xcb718 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4bb0-0x000f4bbf] mapped at [ffffffffff200bb0] [ 0.000000] Base memory trampoline at [ffff9fd7c0090000] 90000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x2f242e000, 0x2f242efff] PGTABLE [ 0.000000] BRK [0x2f242f000, 0x2f242ffff] PGTABLE [ 0.000000] BRK [0x2f2430000, 0x2f2430fff] PGTABLE [ 0.000000] BRK [0x2f2431000, 0x2f2431fff] PGTABLE [ 0.000000] BRK [0x2f2432000, 0x2f2432fff] PGTABLE [ 0.000000] BRK [0x2f2433000, 0x2f2433fff] PGTABLE [ 0.000000] BRK [0x2f2434000, 0x2f2434fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x334b0000-0x35a4ffff] [ 0.000000] Early table checksum verification disabled [ 0.000000] ACPI: RSDP 00000000000f9810 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 00000000cb78e080 00084 (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000cb795c88 0010C (v05 HPQOEM SLIC-WKS 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000cb78e198 07AE9 (v02 HPQOEM SLIC-WKS 00000388 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cba13080 00040 [ 0.000000] ACPI: APIC 00000000cb795d98 00090 (v03 HPQOEM SLIC-WKS 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000cb795e28 00044 (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013) [ 0.000000] ACPI: ASF! 00000000cb795e70 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: MCFG 00000000cb795f18 0003C (v01 HPQOEM OEMMCFG. 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cb795f58 00038 (v01 HPQOEM SLIC-WKS 01072009 AMI. 00000005) [ 0.000000] ACPI: ASF! 00000000cb795f90 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 00000000cb796030 05913 (v01 COMPAQ WMI 00000001 MSFT 03000001) [ 0.000000] ACPI: SLIC 00000000cb79b948 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000) [ 0.000000] ACPI: SSDT 00000000cb79bac0 02A71 (v02 HPQOEM CpuDef 00004000 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000cb79e538 CD380 (v02 INTEL CpuPm 00004000 INTL 20051117) [ 0.000000] ACPI: IFEU 00000000cb86b8b8 00042 (v01 HPQOEM SLIC-WKS 01072009 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x42ffd9000-0x42fffffff] [ 0.000000] Reserving 161MB of memory at 656MB for crashkernel (System RAM: 16310MB) [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x42fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00095fff] [ 0.000000] node 0: [mem 0x00100000-0xcb717fff] [ 0.000000] node 0: [mem 0x100000000-0x42fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x42fffffff] [ 0.000000] On node 0 totalpages: 4175533 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3989 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12957 pages used for memmap [ 0.000000] DMA32 zone: 829208 pages, LIFO batch:31 [ 0.000000] Normal zone: 52224 pages used for memmap [ 0.000000] Normal zone: 3342336 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00096000-0x00096fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00097000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb718000-0xcb86bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb86c000-0xcba1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcba1c000-0xcbb34fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcbb35000-0xcbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xcc000000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 35 pages/cpu @ffff9fdbefc00000 s104856 r8192 d30312 u524288 [ 0.000000] pcpu-alloc: s104856 r8192 d30312 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4110267 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-862.el7.x86_64 root=/dev/mapper/rhel-root ro crashkernel=auto rd.lvm.lv=rhel/root rd.lvm.lv=rhel/swap rhgb quiet LANG=en_US.UTF-8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] Memory: 5160896k/17563648k available (7324k kernel code, 861516k absent, 551312k reserved, 6305k data, 1832k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] x86/pti: Unmapping kernel while in userspace [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:327936 nr_irqs:864 0 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 2793.270 MHz processor [ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.54 BogoMIPS (lpj=2793270) [ 0.000038] pid_max: default: 32768 minimum: 301 [ 0.000057] Security Framework initialized [ 0.000064] SELinux: Initializing. [ 0.000070] SELinux: Starting in permissive mode [ 0.000071] Yama: becoming mindful. [ 0.001255] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.004540] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006175] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.006194] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.006496] Initializing cgroup subsys memory [ 0.006503] Initializing cgroup subsys devices [ 0.006505] Initializing cgroup subsys freezer [ 0.006506] Initializing cgroup subsys net_cls [ 0.006508] Initializing cgroup subsys blkio [ 0.006509] Initializing cgroup subsys perf_event [ 0.006510] Initializing cgroup subsys hugetlb [ 0.006512] Initializing cgroup subsys pids [ 0.006513] Initializing cgroup subsys net_prio [ 0.006537] CPU: Physical Processor ID: 0 [ 0.006538] CPU: Processor Core ID: 0 [ 0.006543] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.006544] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.006546] mce: CPU supports 16 MCE banks [ 0.006559] CPU0: Thermal monitoring enabled (TM1) [ 0.006588] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.006589] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.006589] tlb_flushall_shift: 6 [ 0.006590] FEATURE SPEC_CTRL Not Present [ 0.006591] FEATURE IBPB_SUPPORT Not Present [ 0.006721] Spectre V2 : Vulnerable: Retpoline without IBPB [ 0.007832] Freeing SMP alternatives: 24k freed [ 0.010694] ACPI: Core revision 20130517 [ 0.038168] ACPI: All ACPI Tables successfully acquired [ 0.038517] ftrace: allocating 28047 entries in 110 pages [ 0.062503] IRQ remapping doesn't support X2APIC mode, disable x2apic. [ 0.064653] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.074657] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1603 0 @ 2.80GHz (fam: 06, model: 2d, stepping: 07) [ 0.074698] TSC deadline timer enabled [ 0.074741] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.074761] ... version: 3 [ 0.074763] ... bit width: 48 [ 0.074764] ... generic registers: 8 [ 0.074765] ... value mask: 0000ffffffffffff [ 0.074766] ... max period: 00007fffffffffff [ 0.074767] ... fixed-purpose events: 3 [ 0.074768] ... event mask: 00000007000000ff [ 0.079108] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.076070] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.084652] Brought up 4 CPUs [ 0.084656] smpboot: Max logical packages: 1 [ 0.084658] smpboot: Total of 4 processors activated (22346.16 BogoMIPS) [ 0.151561] node 0 initialised, 2747481 pages in 62ms [ 0.151714] devtmpfs: initialized [ 0.155078] EVM: security.selinux [ 0.155080] EVM: security.ima [ 0.155081] EVM: security.capability [ 0.155158] PM: Registering ACPI NVS region [mem 0xcb86c000-0xcba1bfff] (1769472 bytes) [ 0.155181] PM: Registering ACPI NVS region [mem 0xcbb35000-0xcbffffff] (5025792 bytes) [ 0.156414] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.156417] pinctrl core: initialized pinctrl subsystem [ 0.156556] RTC time: 7:11:25, date: 01/22/19 [ 0.156635] NET: Registered protocol family 16 [ 0.156823] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.156825] ACPI: bus type PCI registered [ 0.156827] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.156929] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.156932] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.156945] PCI: Using configuration type 1 for base access [ 0.157109] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.157118] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.162325] ACPI: Added _OSI(Module Device) [ 0.162327] ACPI: Added _OSI(Processor Device) [ 0.162328] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.162329] ACPI: Added _OSI(Processor Aggregator Device) [ 0.169193] ACPI: EC: Look up EC in DSDT [ 0.175799] ACPI: Executed 1 blocks of module-level executable AML code [ 0.294346] ACPI: Interpreter enabled [ 0.294364] ACPI: (supports S0 S3 S4 S5) [ 0.294366] ACPI: Using IOAPIC for interrupt routing [ 0.294402] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.294476] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.308956] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) [ 0.308963] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.309073] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.309125] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.309128] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.309130] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.309132] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.309856] PCI host bridge to bus 0000:00 [ 0.309859] pci_bus 0000:00: root bus resource [bus 00-7f] [ 0.309862] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.309864] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.309866] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.309867] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.309870] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.309871] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.309873] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff window] [ 0.309875] pci_bus 0000:00: root bus resource [mem 0x380000000000-0x38007fffffff window] [ 0.309888] pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000 [ 0.309963] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.310037] pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400 [ 0.310116] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.310161] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.310206] pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400 [ 0.310283] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.310328] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.310370] pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400 [ 0.310447] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.310489] pci 0000:00:03.0: System wakeup disabled by ACPI [ 0.310528] pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000 [ 0.310636] pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000 [ 0.310738] pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020 [ 0.310750] pci 0000:00:05.4: reg 0x10: [mem 0xeff29000-0xeff29fff] [ 0.310931] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 0.311200] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 0.311398] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 0.311452] pci 0000:00:16.0: reg 0x10: [mem 0xeff28000-0xeff2800f 64bit] [ 0.311584] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.311714] pci 0000:00:16.2: [8086:1d3c] type 00 class 0x010185 [ 0.311729] pci 0000:00:16.2: reg 0x10: [io 0xe0b0-0xe0b7] [ 0.311773] pci 0000:00:16.2: reg 0x14: [io 0xe0a0-0xe0a3] [ 0.311781] pci 0000:00:16.2: reg 0x18: [io 0xe090-0xe097] [ 0.311796] pci 0000:00:16.2: reg 0x1c: [io 0xe080-0xe083] [ 0.311839] pci 0000:00:16.2: reg 0x20: [io 0xe070-0xe07f] [ 0.312005] pci 0000:00:16.3: [8086:1d3d] type 00 class 0x070002 [ 0.312055] pci 0000:00:16.3: reg 0x10: [io 0xe060-0xe067] [ 0.312099] pci 0000:00:16.3: reg 0x14: [mem 0xeff27000-0xeff27fff] [ 0.312393] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.312443] pci 0000:00:19.0: reg 0x10: [mem 0xeff00000-0xeff1ffff] [ 0.312487] pci 0000:00:19.0: reg 0x14: [mem 0xeff2c000-0xeff2cfff] [ 0.312531] pci 0000:00:19.0: reg 0x18: [io 0xe040-0xe05f] [ 0.312659] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.312724] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.312801] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 0.312862] pci 0000:00:1a.0: reg 0x10: [mem 0xeff2e000-0xeff2e3ff] [ 0.313013] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.313079] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.313187] pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300 [ 0.313240] pci 0000:00:1b.0: reg 0x10: [mem 0xeff20000-0xeff23fff 64bit] [ 0.313427] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.313595] pci 0000:00:1c.0: [8086:1d12] type 01 class 0x060400 [ 0.313742] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.313816] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.313925] pci 0000:00:1c.5: [8086:1d18] type 01 class 0x060400 [ 0.314036] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.314110] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.314212] pci 0000:00:1c.6: [8086:1d14] type 01 class 0x060400 [ 0.314397] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.314472] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 0.314578] pci 0000:00:1c.7: [8086:1d16] type 01 class 0x060400 [ 0.314725] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.314799] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 0.314905] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 0.314923] pci 0000:00:1d.0: reg 0x10: [mem 0xeff2d000-0xeff2d3ff] [ 0.315074] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.315141] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.315245] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.315424] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.315572] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 0.316672] pci 0000:00:1f.2: [8086:2826] type 00 class 0x010400 [ 0.316722] pci 0000:00:1f.2: reg 0x10: [io 0xe0f0-0xe0f7] [ 0.316765] pci 0000:00:1f.2: reg 0x14: [io 0xe0e0-0xe0e3] [ 0.316808] pci 0000:00:1f.2: reg 0x18: [io 0xe0d0-0xe0d7] [ 0.316851] pci 0000:00:1f.2: reg 0x1c: [io 0xe0c0-0xe0c3] [ 0.316894] pci 0000:00:1f.2: reg 0x20: [io 0xe020-0xe03f] [ 0.316937] pci 0000:00:1f.2: reg 0x24: [mem 0xeff2b000-0xeff2b7ff] [ 0.317047] pci 0000:00:1f.2: PME# supported from D3hot [ 0.317211] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 0.317261] pci 0000:00:1f.3: reg 0x10: [mem 0xeff2a000-0xeff2a0ff 64bit] [ 0.317317] pci 0000:00:1f.3: reg 0x20: [io 0xe000-0xe01f] [ 0.317542] pci 0000:00:01.0: PCI bridge to [bus 03] [ 0.317605] pci 0000:05:00.0: [1022:1470] type 01 class 0x060400 [ 0.317620] pci 0000:05:00.0: reg 0x10: [mem 0xefd00000-0xefd03fff] [ 0.317674] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.317731] pci 0000:00:02.0: PCI bridge to [bus 05-07] [ 0.317734] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.317738] pci 0000:00:02.0: bridge window [mem 0xefc00000-0xefdfffff] [ 0.317743] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.317782] pci 0000:06:00.0: [1022:1471] type 01 class 0x060400 [ 0.317843] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.317902] pci 0000:05:00.0: PCI bridge to [bus 06-07] [ 0.317907] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] [ 0.317910] pci 0000:05:00.0: bridge window [mem 0xefc00000-0xefcfffff] [ 0.317915] pci 0000:05:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.317952] pci 0000:07:00.0: [1002:6861] type 00 class 0x030000 [ 0.317971] pci 0000:07:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.317980] pci 0000:07:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref] [ 0.317987] pci 0000:07:00.0: reg 0x20: [io 0xc000-0xc0ff] [ 0.317994] pci 0000:07:00.0: reg 0x24: [mem 0xefc00000-0xefc7ffff] [ 0.318000] pci 0000:07:00.0: reg 0x30: [mem 0xefc80000-0xefc9ffff pref] [ 0.318048] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.318102] pci 0000:07:00.1: [1002:aaf8] type 00 class 0x040300 [ 0.318114] pci 0000:07:00.1: reg 0x10: [mem 0xefca0000-0xefca3fff] [ 0.318179] pci 0000:07:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.318238] pci 0000:06:00.0: PCI bridge to [bus 07] [ 0.318242] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff] [ 0.318246] pci 0000:06:00.0: bridge window [mem 0xefc00000-0xefcfffff] [ 0.318250] pci 0000:06:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.318306] pci 0000:00:03.0: PCI bridge to [bus 04] [ 0.318631] pci 0000:02:00.0: [8086:1d6b] type 00 class 0x010700 [ 0.318656] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe0803fff 64bit pref] [ 0.318706] pci 0000:02:00.0: reg 0x18: [mem 0xe0400000-0xe07fffff 64bit pref] [ 0.318751] pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd0ff] [ 0.318963] pci 0000:02:00.0: reg 0x164: [mem 0x380000000000-0x380000003fff 64bit pref] [ 0.318967] pci 0000:02:00.0: VF(n) BAR0 space: [mem 0x380000000000-0x38000007bfff 64bit pref] (contains BAR0 for 31 VFs) [ 0.319260] pci 0000:00:11.0: PCI bridge to [bus 02] [ 0.319300] pci 0000:00:11.0: bridge window [io 0xd000-0xdfff] [ 0.319345] pci 0000:00:11.0: bridge window [mem 0xe0400000-0xe08fffff 64bit pref] [ 0.319510] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.319681] pci 0000:00:1c.5: PCI bridge to [bus 08] [ 0.319825] pci 0000:00:1c.6: PCI bridge to [bus 09] [ 0.319960] pci 0000:00:1c.7: PCI bridge to [bus 0a] [ 0.320176] pci 0000:0b:05.0: [11c1:5811] type 00 class 0x0c0010 [ 0.320227] pci 0000:0b:05.0: reg 0x10: [mem 0xefe00000-0xefe00fff] [ 0.320372] pci 0000:0b:05.0: supports D1 D2 [ 0.320374] pci 0000:0b:05.0: PME# supported from D0 D1 D2 D3hot [ 0.320521] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode) [ 0.320561] pci 0000:00:1e.0: bridge window [mem 0xefe00000-0xefefffff] [ 0.320603] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.320605] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.320607] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.320608] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.320610] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.320612] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.320614] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xefffffff window] (subtractive decode) [ 0.320616] pci 0000:00:1e.0: bridge window [mem 0x380000000000-0x38007fffffff window] (subtractive decode) [ 0.320737] pci_bus 0000:00: on NUMA node 0 [ 0.321522] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.321705] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.321865] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.322017] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.322196] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.322383] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.322567] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.322756] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.323938] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.323940] vgaarb: loaded [ 0.323941] vgaarb: bridge control possible 0000:07:00.0 [ 0.324028] SCSI subsystem initialized [ 0.324059] ACPI: bus type USB registered [ 0.324077] usbcore: registered new interface driver usbfs [ 0.324085] usbcore: registered new interface driver hub [ 0.324107] usbcore: registered new device driver usb [ 0.324184] EDAC MC: Ver: 3.0.0 [ 0.324448] PCI: Using ACPI for IRQ routing [ 0.327409] PCI: Discovered peer bus 7f [ 0.327410] PCI: root bus 7f: using default resources [ 0.327411] PCI: Probing PCI hardware (bus 7f) [ 0.327437] ACPI: \: failed to evaluate _DSM (0x1001) [ 0.327438] PCI host bridge to bus 0000:7f [ 0.327440] pci_bus 0000:7f: root bus resource [io 0x0000-0xffff] [ 0.327442] pci_bus 0000:7f: root bus resource [mem 0x00000000-0x3fffffffffff] [ 0.327444] pci_bus 0000:7f: No busn resource found for root bus, will use [bus 7f-ff] [ 0.327447] pci_bus 0000:7f: busn_res: can not insert [bus 7f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f]) [ 0.327457] pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000 [ 0.327515] pci 0000:7f:08.3: [8086:3c83] type 00 class 0x088000 [ 0.327579] pci 0000:7f:08.4: [8086:3c84] type 00 class 0x088000 [ 0.327646] pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000 [ 0.327697] pci 0000:7f:09.3: [8086:3c93] type 00 class 0x088000 [ 0.327758] pci 0000:7f:09.4: [8086:3c94] type 00 class 0x088000 [ 0.327828] pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000 [ 0.327872] pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000 [ 0.327915] pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000 [ 0.327959] pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000 [ 0.328004] pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000 [ 0.328046] pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000 [ 0.328089] pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000 [ 0.328131] pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000 [ 0.328176] pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000 [ 0.328218] pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000 [ 0.328260] pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000 [ 0.328302] pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000 [ 0.328346] pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000 [ 0.328388] pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000 [ 0.328433] pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100 [ 0.328483] pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000 [ 0.328544] pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000 [ 0.328602] pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000 [ 0.328659] pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000 [ 0.328716] pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000 [ 0.328774] pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000 [ 0.328830] pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000 [ 0.328880] pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000 [ 0.328938] pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000 [ 0.328997] pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000 [ 0.329055] pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000 [ 0.329112] pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000 [ 0.329171] pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000 [ 0.329229] pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000 [ 0.329287] pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000 [ 0.329346] pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000 [ 0.329397] pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000 [ 0.329441] pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100 [ 0.329485] pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100 [ 0.329531] pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100 [ 0.329574] pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000 [ 0.329624] pci_bus 0000:7f: busn_res: [bus 7f-ff] end is updated to 7f [ 0.329626] pci_bus 0000:7f: busn_res: can not insert [bus 7f] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f]) [ 0.329634] PCI: pci_cache_line_size set to 64 bytes [ 0.329687] pci 0000:02:00.0: can't claim BAR 7 [mem 0x380000000000-0x38000007bfff 64bit pref]: no compatible bridge window [ 0.329936] e820: reserve RAM buffer [mem 0x00096400-0x0009ffff] [ 0.329937] e820: reserve RAM buffer [mem 0xcb718000-0xcbffffff] [ 0.330062] NetLabel: Initializing [ 0.330064] NetLabel: domain hash size = 128 [ 0.330064] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.330082] NetLabel: unlabeled traffic allowed by default [ 0.330137] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.330143] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.333271] amd_nb: Cannot enumerate AMD northbridges [ 0.333327] Switched to clocksource hpet [ 0.338033] pnp: PnP ACPI init [ 0.338048] ACPI: bus type PNP registered [ 0.338149] system 00:00: [mem 0xfc000000-0xfcffffff window] has been reserved [ 0.338151] system 00:00: [mem 0xfd000000-0xfdffffff window] has been reserved [ 0.338154] system 00:00: [mem 0xfe000000-0xfeafffff window] has been reserved [ 0.338156] system 00:00: [mem 0xfeb00000-0xfebfffff window] has been reserved [ 0.338158] system 00:00: [mem 0xfed00400-0xfed3ffff window] could not be reserved [ 0.338160] system 00:00: [mem 0xfed45000-0xfedfffff window] has been reserved [ 0.338162] system 00:00: [mem 0xeff26000-0xeff26fff window] has been reserved [ 0.338166] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.338288] system 00:01: [io 0x0620-0x063f] has been reserved [ 0.338290] system 00:01: [io 0x0610-0x061f] has been reserved [ 0.338293] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.338407] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.338493] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.338522] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.338576] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.338579] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.338899] system 00:06: [io 0x0400-0x0453] could not be reserved [ 0.338902] system 00:06: [io 0x0458-0x047f] has been reserved [ 0.338906] system 00:06: [io 0x1180-0x119f] has been reserved [ 0.338908] system 00:06: [io 0x0500-0x057f] has been reserved [ 0.338910] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.338912] system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.338914] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.338916] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.338919] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.338982] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.338985] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.339741] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.339744] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.339747] pnp: PnP ACPI: found 9 devices [ 0.339748] ACPI: bus type PNP unregistered [ 0.351477] pci 0000:00:11.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 100000 add_align 100000 [ 0.351548] pci 0000:00:11.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 100000 min_align 100000 [ 0.351551] pci 0000:00:11.0: res[14]=[mem 0x00100000-0x001fffff] res_to_dev_res add_size 100000 min_align 100000 [ 0.351556] pci 0000:00:11.0: BAR 14: assigned [mem 0xe0200000-0xe02fffff] [ 0.351559] pci 0000:00:01.0: PCI bridge to [bus 03] [ 0.351569] pci 0000:06:00.0: PCI bridge to [bus 07] [ 0.351572] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff] [ 0.351576] pci 0000:06:00.0: bridge window [mem 0xefc00000-0xefcfffff] [ 0.351579] pci 0000:06:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.351583] pci 0000:05:00.0: PCI bridge to [bus 06-07] [ 0.351586] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] [ 0.351590] pci 0000:05:00.0: bridge window [mem 0xefc00000-0xefcfffff] [ 0.351593] pci 0000:05:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.351597] pci 0000:00:02.0: PCI bridge to [bus 05-07] [ 0.351600] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.351604] pci 0000:00:02.0: bridge window [mem 0xefc00000-0xefdfffff] [ 0.351607] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.351612] pci 0000:00:03.0: PCI bridge to [bus 04] [ 0.351622] pci 0000:02:00.0: res[7]=[mem size 0x00000000 64bit pref] res_to_dev_res add_size 7c000 min_align 0 [ 0.351625] pci 0000:02:00.0: BAR 7: assigned [mem 0xe0804000-0xe087ffff 64bit pref] [ 0.351639] pci 0000:00:11.0: PCI bridge to [bus 02] [ 0.351677] pci 0000:00:11.0: bridge window [io 0xd000-0xdfff] [ 0.351718] pci 0000:00:11.0: bridge window [mem 0xe0200000-0xe02fffff] [ 0.351757] pci 0000:00:11.0: bridge window [mem 0xe0400000-0xe08fffff 64bit pref] [ 0.351799] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.351845] pci 0000:00:1c.5: PCI bridge to [bus 08] [ 0.351891] pci 0000:00:1c.6: PCI bridge to [bus 09] [ 0.351937] pci 0000:00:1c.7: PCI bridge to [bus 0a] [ 0.351983] pci 0000:00:1e.0: PCI bridge to [bus 0b] [ 0.352023] pci 0000:00:1e.0: bridge window [mem 0xefe00000-0xefefffff] [ 0.352031] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.352033] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.352034] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.352036] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.352038] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.352040] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.352042] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xefffffff window] [ 0.352044] pci_bus 0000:00: resource 11 [mem 0x380000000000-0x38007fffffff window] [ 0.352046] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.352048] pci_bus 0000:05: resource 1 [mem 0xefc00000-0xefdfffff] [ 0.352050] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.352052] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 0.352054] pci_bus 0000:06: resource 1 [mem 0xefc00000-0xefcfffff] [ 0.352056] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.352058] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff] [ 0.352059] pci_bus 0000:07: resource 1 [mem 0xefc00000-0xefcfffff] [ 0.352061] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.352063] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.352065] pci_bus 0000:02: resource 1 [mem 0xe0200000-0xe02fffff] [ 0.352067] pci_bus 0000:02: resource 2 [mem 0xe0400000-0xe08fffff 64bit pref] [ 0.352069] pci_bus 0000:0b: resource 1 [mem 0xefe00000-0xefefffff] [ 0.352071] pci_bus 0000:0b: resource 4 [io 0x0000-0x03af window] [ 0.352073] pci_bus 0000:0b: resource 5 [io 0x03e0-0x0cf7 window] [ 0.352075] pci_bus 0000:0b: resource 6 [io 0x03b0-0x03df window] [ 0.352077] pci_bus 0000:0b: resource 7 [io 0x0d00-0xffff window] [ 0.352079] pci_bus 0000:0b: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.352081] pci_bus 0000:0b: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.352082] pci_bus 0000:0b: resource 10 [mem 0xd0000000-0xefffffff window] [ 0.352084] pci_bus 0000:0b: resource 11 [mem 0x380000000000-0x38007fffffff window] [ 0.352090] pci_bus 0000:7f: resource 4 [io 0x0000-0xffff] [ 0.352092] pci_bus 0000:7f: resource 5 [mem 0x00000000-0x3fffffffffff] [ 0.352121] NET: Registered protocol family 2 [ 0.352362] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.352587] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.352725] TCP: Hash tables configured (established 131072 bind 65536) [ 0.352746] TCP: reno registered [ 0.352766] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.352824] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.352897] NET: Registered protocol family 1 [ 0.385754] pci 0000:07:00.0: Boot video device [ 0.385882] PCI: CLS 64 bytes, default 64 [ 0.385923] Unpacking initramfs... [ 0.892437] Freeing initrd memory: 38528k freed [ 0.898249] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.898256] software IO TLB [mem 0xc7718000-0xcb718000] (64MB) mapped at [ffff9fd887718000-ffff9fd88b717fff] [ 0.898309] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 0.898310] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 0.898311] RAPL PMU: hw unit of domain package 2^-16 Joules [ 0.898313] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 0.899987] sha1_ssse3: Using AVX optimized SHA-1 implementation [ 0.900243] sha256_ssse3: Using AVX optimized SHA-256 implementation [ 0.901036] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.901054] Initialise system trusted keyring [ 0.901074] audit: initializing netlink socket (disabled) [ 0.901088] type=2000 audit(1548141084.885:1): initialized [ 0.924414] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.924416] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.926011] zpool: loaded [ 0.926014] zbud: loaded [ 0.926282] VFS: Disk quotas dquot_6.5.2 [ 0.926365] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.926618] msgmni has been set to 31619 [ 0.926664] Key type big_key registered [ 0.926667] SELinux: Registering netfilter hooks [ 0.930309] NET: Registered protocol family 38 [ 0.930315] Key type asymmetric registered [ 0.930318] Asymmetric key parser 'x509' registered [ 0.930392] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.930559] io scheduler noop registered [ 0.930562] io scheduler deadline registered (default) [ 0.930587] io scheduler cfq registered [ 0.930590] io scheduler mq-deadline registered [ 0.930593] io scheduler kyber registered [ 0.932272] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.932280] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.932399] intel_idle: MWAIT substates: 0x21120 [ 0.932401] intel_idle: v0.4.1 model 0x2D [ 0.932521] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.932609] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.932614] ACPI: Power Button [PWRB] [ 0.932656] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.932658] ACPI: Power Button [PWRF] [ 0.932736] ACPI: Requesting acpi_cpufreq [ 0.937493] GHES: HEST is not enabled! [ 0.937636] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.938532] serial8250: skipping TxEn test for device [8086:1d3d] subsystem [103c:1589] [ 0.960257] 0000:00:16.3: ttyS0 at I/O 0xe060 (irq = 17) is a 16550A [ 0.960832] Non-volatile memory driver v1.3 [ 0.960931] Linux agpgart interface v0.103 [ 0.961128] crash memory driver: version 1.1 [ 0.961213] rdac: device handler registered [ 0.961400] hp_sw: device handler registered [ 0.961403] emc: device handler registered [ 0.961553] alua: device handler registered [ 0.961595] libphy: Fixed MDIO Bus: probed [ 0.961680] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.961686] ehci-pci: EHCI PCI platform driver [ 0.961896] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.962007] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.962054] ehci-pci 0000:00:1a.0: debug port 2 [ 0.966116] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.966210] ehci-pci 0000:00:1a.0: irq 16, io mem 0xeff2e000 [ 0.971439] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.971477] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.971532] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.971534] usb usb1: Product: EHCI Host Controller [ 0.971536] usb usb1: Manufacturer: Linux 3.10.0-862.el7.x86_64 ehci_hcd [ 0.971538] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.971687] hub 1-0:1.0: USB hub found [ 0.971694] hub 1-0:1.0: 3 ports detected [ 0.972148] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.972255] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.972273] ehci-pci 0000:00:1d.0: debug port 2 [ 0.976317] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.976436] ehci-pci 0000:00:1d.0: irq 23, io mem 0xeff2d000 [ 0.982349] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.982377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.982379] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.982381] usb usb2: Product: EHCI Host Controller [ 0.982383] usb usb2: Manufacturer: Linux 3.10.0-862.el7.x86_64 ehci_hcd [ 0.982385] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.982603] hub 2-0:1.0: USB hub found [ 0.982609] hub 2-0:1.0: 3 ports detected [ 0.982825] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.982831] ohci-pci: OHCI PCI platform driver [ 0.982846] uhci_hcd: USB Universal Host Controller Interface driver [ 0.982897] usbcore: registered new interface driver usbserial [ 0.982904] usbcore: registered new interface driver usbserial_generic [ 0.982912] usbserial: USB Serial support registered for generic [ 0.982950] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.986751] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.986756] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.986897] mousedev: PS/2 mouse device common for all mice [ 0.987220] rtc_cmos 00:04: RTC can wake from S4 [ 0.988081] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.988269] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.988319] intel_pstate: Intel P-state driver initializing [ 0.988772] cpuidle: using governor menu [ 0.989770] hidraw: raw HID events driver (C) Jiri Kosina [ 0.990010] usbcore: registered new interface driver usbhid [ 0.990013] usbhid: USB HID core driver [ 0.990217] drop_monitor: Initializing network drop monitor service [ 0.990394] TCP: cubic registered [ 0.990402] Initializing XFRM netlink socket [ 0.990643] NET: Registered protocol family 10 [ 0.991005] NET: Registered protocol family 17 [ 0.991019] mpls_gso: MPLS GSO support [ 0.991616] microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710 [ 0.991626] microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710 [ 0.991737] microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710 [ 0.991824] microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710 [ 0.992003] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.992663] PM: Hibernation image not present or could not be loaded. [ 0.992670] Loading compiled-in X.509 certificates [ 0.993903] Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80' [ 0.995076] Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8' [ 0.996268] Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: 5173023bf81637d7bf3c5150134eec841b96fd0b' [ 0.996306] registered taskstats version 1 [ 1.003429] Key type trusted registered [ 1.010691] Key type encrypted registered [ 1.010729] IMA: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.012447] Magic number: 3:977:167 [ 1.012526] acpi device:30: hash matches [ 1.012557] acpi PNP0000:00: hash matches [ 1.012863] rtc_cmos 00:04: setting system clock to 2019-01-22 07:11:25 UTC (1548141085) [ 1.014507] Freeing unused kernel memory: 1832k freed [ 1.014928] Write protecting the kernel read-only data: 12288k [ 1.019246] Freeing unused kernel memory: 856k freed [ 1.022852] Freeing unused kernel memory: 684k freed [ 1.028307] random: systemd: uninitialized urandom read (16 bytes read) [ 1.028921] random: systemd: uninitialized urandom read (16 bytes read) [ 1.028945] random: systemd: uninitialized urandom read (16 bytes read) [ 1.029851] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.030202] systemd[1]: Detected architecture x86-64. [ 1.030208] systemd[1]: Running in initial RAM disk. [ 1.030257] systemd[1]: Set hostname to . [ 1.081067] random: systemd: uninitialized urandom read (16 bytes read) [ 1.081098] random: systemd: uninitialized urandom read (16 bytes read) [ 1.081143] random: systemd: uninitialized urandom read (16 bytes read) [ 1.081217] random: systemd: uninitialized urandom read (16 bytes read) [ 1.082146] random: systemd: uninitialized urandom read (16 bytes read) [ 1.082418] random: systemd: uninitialized urandom read (16 bytes read) [ 1.082847] random: systemd: uninitialized urandom read (16 bytes read) [ 1.089298] systemd[1]: Created slice Root Slice. [ 1.089312] systemd[1]: Starting Root Slice. [ 1.089459] systemd[1]: Reached target Swap. [ 1.089470] systemd[1]: Starting Swap. [ 1.089634] systemd[1]: Created slice System Slice. [ 1.089645] systemd[1]: Starting System Slice. [ 1.089696] systemd[1]: Reached target Timers. [ 1.089705] systemd[1]: Starting Timers. [ 1.089871] systemd[1]: Listening on udev Control Socket. [ 1.089881] systemd[1]: Starting udev Control Socket. [ 1.089933] systemd[1]: Reached target Slices. [ 1.089942] systemd[1]: Starting Slices. [ 1.090081] systemd[1]: Listening on udev Kernel Socket. [ 1.090090] systemd[1]: Starting udev Kernel Socket. [ 1.090230] systemd[1]: Listening on Journal Socket. [ 1.090241] systemd[1]: Starting Journal Socket. [ 1.091075] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.091172] systemd[1]: Reached target Sockets. [ 1.091183] systemd[1]: Starting Sockets. [ 1.092060] systemd[1]: Starting Journal Service... [ 1.093177] systemd[1]: Starting dracut cmdline hook... [ 1.094109] systemd[1]: Starting Setup Virtual Console... [ 1.094182] systemd[1]: Reached target Local File Systems. [ 1.094193] systemd[1]: Starting Local File Systems. [ 1.095284] systemd[1]: Starting Apply Kernel Variables... [ 1.096261] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.099033] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.099751] systemd[1]: Started Apply Kernel Variables. [ 1.102942] systemd[1]: Started Create Static Device Nodes in /dev. [ 1.165914] systemd[1]: Started Setup Virtual Console. [ 1.211685] systemd[1]: Started Journal Service. [ 1.259052] device-mapper: uevent: version 1.0.3 [ 1.259192] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.273382] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.284421] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.371094] pps_core: LinuxPPS API ver. 1 registered [ 1.371097] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.373063] PTP clock support registered [ 1.388042] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.388046] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.388323] hub 1-1:1.0: USB hub found [ 1.388541] hub 1-1:1.0: 6 ports detected [ 1.398868] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.398872] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.399075] hub 2-1:1.0: USB hub found [ 1.399160] hub 2-1:1.0: 8 ports detected [ 1.400204] libata version 3.00 loaded. [ 1.400656] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.400659] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.400838] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.400894] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 1.420826] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 1.420842] isci 0000:02:00.0: driver configured for rev: 5 silicon [ 1.420851] isci 0000:02:00.0: OEM parameter table found in OROM [ 1.420854] isci 0000:02:00.0: OEM SAS parameters (version: 1.1) loaded (platform) [ 1.421597] isci 0000:02:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 1.424560] scsi host0: isci [ 1.425518] isci 0000:02:00.0: irq 28 for MSI/MSI-X [ 1.425523] isci 0000:02:00.0: irq 29 for MSI/MSI-X [ 1.449771] firewire_ohci 0000:0b:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 1.516385] e1000e 0000:00:19.0 (unregistered net_device): registered PHC clock [ 1.625808] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 80:c1:6e:e6:52:2c [ 1.625811] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.625936] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 1.626690] ahci 0000:00:1f.2: version 3.0 [ 1.626909] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X [ 1.637637] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl RAID mode [ 1.637642] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.640506] scsi host1: ahci [ 1.640955] scsi host2: ahci [ 1.641315] scsi host3: ahci [ 1.641716] scsi host4: ahci [ 1.642157] scsi host5: ahci [ 1.642538] scsi host6: ahci [ 1.642662] ata1: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b100 irq 30 [ 1.642664] ata2: DUMMY [ 1.642699] ata3: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b200 irq 30 [ 1.642700] ata4: DUMMY [ 1.642701] ata5: DUMMY [ 1.642704] ata6: DUMMY [ 1.643900] scsi host7: ata_generic [ 1.644227] scsi host8: ata_generic [ 1.644265] ata7: PATA max UDMA/100 cmd 0xe0b0 ctl 0xe0a0 bmdma 0xe070 irq 18 [ 1.644267] ata8: PATA max UDMA/100 cmd 0xe090 ctl 0xe080 bmdma 0xe078 irq 18 [ 1.674602] usb 2-1.1: new low-speed USB device number 3 using ehci-pci [ 1.772118] usb 2-1.1: New USB device found, idVendor=03f0, idProduct=0024 [ 1.772125] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.772129] usb 2-1.1: Product: HP Basic USB Keyboard [ 1.772133] usb 2-1.1: Manufacturer: CHICONY [ 1.778172] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2 [ 1.838195] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.1/input0 [ 1.901719] tsc: Refined TSC clocksource calibration: 2793.238 MHz [ 1.901961] Switched to clocksource tsc [ 1.911419] usb 2-1.2: new low-speed USB device number 4 using ehci-pci [ 1.948443] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.948512] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.950175] ata3.00: ATAPI: hp DVD RW AD-7250H5, 1HNK, max UDMA/100 [ 1.951593] firewire_core 0000:0b:05.0: created device fw0: GUID 0060b000008c53f4, S400 [ 1.952128] ata3.00: configured for UDMA/100 [ 1.958629] ata1.00: ATA-7: WL320GSA872, 12.01B01, max UDMA/133 [ 1.958637] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.959797] ata1.00: configured for UDMA/133 [ 1.960109] scsi 1:0:0:0: Direct-Access ATA WL320GSA872 1B01 PQ: 0 ANSI: 5 [ 1.972600] scsi 3:0:0:0: CD-ROM hp DVD RW AD-7250H5 1HNK PQ: 0 ANSI: 5 [ 2.001689] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=094a [ 2.001696] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.001701] usb 2-1.2: Product: HP USB Optical Mouse [ 2.001705] usb 2-1.2: Manufacturer: PixArt [ 2.005371] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input3 [ 2.005690] hid-generic 0003:03F0:094A.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0 [ 2.203130] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.203270] sd 1:0:0:0: [sda] Write Protect is off [ 2.203277] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.203344] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.213042] sda: sda1 sda2 [ 2.214003] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.214236] sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.214241] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.214421] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.409918] random: fast init done [ 2.926953] SGI XFS with ACLs, security attributes, no debug enabled [ 2.929016] XFS (dm-0): Mounting V5 Filesystem [ 3.115581] XFS (dm-0): Ending clean mount [ 3.383061] random: crng init done [ 3.489366] systemd-journald[106]: Received SIGTERM from PID 1 (systemd). [ 4.317054] type=1404 audit(1548141088.803:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 4.461338] SELinux: 2048 avtab hash slots, 106529 rules. [ 4.534419] SELinux: 2048 avtab hash slots, 106529 rules. [ 4.569301] SELinux: 8 users, 14 roles, 5009 types, 310 bools, 1 sens, 1024 cats [ 4.569306] SELinux: 97 classes, 106529 rules [ 4.574702] SELinux: Completing initialization. [ 4.574704] SELinux: Setting up existing superblocks. [ 4.583105] type=1403 audit(1548141089.069:3): policy loaded auid=4294967295 ses=4294967295 [ 4.607823] systemd[1]: Successfully loaded SELinux policy in 303.029ms. [ 5.076351] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.076400] systemd[1]: Inserted module 'ip_tables' [ 5.109082] systemd[1]: Relabelled /dev and /run in 29.870ms. [ 8.989312] systemd-journald[524]: Received request to flush runtime journal from PID 1 [ 12.040353] mei_me 0000:00:16.0: irq 31 for MSI/MSI-X [ 12.098205] snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X [ 12.098486] snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client [ 12.098517] snd_hda_intel 0000:07:00.1: irq 34 for MSI/MSI-X [ 12.114639] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:05:00.0/0000:06:00.0/0000:07:00.1/sound/card1/input4 [ 12.114750] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:05:00.0/0000:06:00.0/0000:07:00.1/sound/card1/input5 [ 12.114814] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:05:00.0/0000:06:00.0/0000:07:00.1/sound/card1/input6 [ 12.114884] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:05:00.0/0000:06:00.0/0000:07:00.1/sound/card1/input7 [ 12.114946] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:05:00.0/0000:06:00.0/0000:07:00.1/sound/card1/input8 [ 12.115009] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:05:00.0/0000:06:00.0/0000:07:00.1/sound/card1/input9 [ 12.127769] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line [ 12.127773] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 12.127776] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 12.127778] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 12.127780] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 12.127783] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 12.127785] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 12.127787] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 12.141399] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.147764] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 12.147839] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 12.147923] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 12.148000] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 12.148080] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 14.897809] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 14.954693] wmi: Mapper loaded [ 15.030867] input: PC Speaker as /devices/platform/pcspkr/input/input15 [ 15.032947] iTCO_vendor_support: vendor-support=0 [ 15.034615] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 15.034685] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 15.098733] cryptd: max_cpu_qlen set to 100 [ 15.151286] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 15.151332] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 15.200284] input: HP WMI hotkeys as /devices/virtual/input/input16 [ 15.476831] AVX version of gcm_enc/dec engaged. [ 15.476834] AES CTR mode by8 optimization enabled [ 15.481517] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 15.481559] alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni) [ 15.507480] AMD IOMMUv2 driver by Joerg Roedel [ 15.507483] AMD IOMMUv2 functionality not available on this system [ 15.638657] amdkcl: loading out-of-tree module taints kernel. [ 15.638904] amdkcl: module verification failed: signature and/or required key missing - tainting kernel [ 15.703203] Warning: fail to get symbol drm_fb_helper_release_fbi, replace it with kcl stub [ 15.738440] kvm: disabled by bios [ 15.744752] kvm: disabled by bios [ 15.796545] intel_rapl: Found RAPL domain package [ 15.796549] intel_rapl: Found RAPL domain core [ 15.796555] intel_rapl: Found RAPL domain dram [ 15.796559] intel_rapl: RAPL package 0 domain package locked by BIOS [ 15.960069] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 15.960086] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 15.960089] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 15.960094] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 15.960096] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 15.960100] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 15.960102] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 15.960107] EDAC sbridge: Seeking for: PCI ID 8086:3caa [ 15.960108] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 15.960113] EDAC sbridge: Seeking for: PCI ID 8086:3cab [ 15.960115] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 15.960119] EDAC sbridge: Seeking for: PCI ID 8086:3cac [ 15.960121] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 15.960125] EDAC sbridge: Seeking for: PCI ID 8086:3cad [ 15.960127] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 15.960132] EDAC sbridge: Seeking for: PCI ID 8086:3cb8 [ 15.960133] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 15.960137] EDAC sbridge: Seeking for: PCI ID 8086:3cf4 [ 15.960139] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 15.960143] EDAC sbridge: Seeking for: PCI ID 8086:3cf6 [ 15.960145] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 15.960149] EDAC sbridge: Seeking for: PCI ID 8086:3cf5 [ 15.960309] EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:7f:0e.0 [ 15.960311] EDAC sbridge: Ver: 1.1.1 [ 16.287269] Adding 8191996k swap on /dev/mapper/rhel-swap. Priority:-1 extents:1 across:8191996k FS [ 16.658154] XFS (sda1): Mounting V5 Filesystem [ 16.664702] [drm] amdgpu kernel modesetting enabled. [ 16.664705] [drm] amdgpu version: 19.10.7.418 [ 16.664706] [drm] OS DRM version: 4.14.0 [ 16.664845] CRAT table not found [ 16.664848] Virtual CRAT table created for CPU [ 16.664849] Parsing CRAT table with 1 nodes [ 16.664852] Creating topology SYSFS entries [ 16.664866] Topology: Add CPU node [ 16.664867] Finished initializing topology [ 16.968703] [drm] initializing kernel modesetting (VEGA10 0x1002:0x6861 0x1002:0x0C1E 0x00). [ 16.968733] [drm] register mmio base: 0xEFC00000 [ 16.968737] [drm] register mmio size: 524288 [ 16.968749] [drm] add ip block number 0 [ 16.968752] [drm] add ip block number 1 [ 16.968756] [drm] add ip block number 2 [ 16.968759] [drm] add ip block number 3 [ 16.968762] [drm] add ip block number 4 [ 16.968765] [drm] add ip block number 5 [ 16.968769] [drm] add ip block number 6 [ 16.968772] [drm] add ip block number 7 [ 16.968775] [drm] add ip block number 8 [ 16.968778] [drm] add ip block number 9 [ 17.118120] [drm] UVD(0) is enabled in VM mode [ 17.118126] [drm] UVD(0) ENC is enabled in VM mode [ 17.118129] [drm] VCE enabled in VM mode [ 17.118190] amdgpu 0000:07:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff [ 17.118240] ATOM BIOS: 113-D0510100-110 [ 17.118298] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 17.118312] amdgpu 0000:07:00.0: VRAM: 16368M 0x000000F400000000 - 0x000000F7FEFFFFFF (16368M used) [ 17.118317] amdgpu 0000:07:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [ 17.118322] amdgpu 0000:07:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 17.118327] [drm] Detected VRAM RAM=16368M, BAR=256M [ 17.118330] [drm] RAM width 2048bits HBM [ 17.118499] [TTM] Zone kernel: Available graphics memory: 15180697 kiB [ 17.118504] [TTM] Initializing pool allocator [ 17.118515] [TTM] Initializing DMA pool allocator [ 17.118579] [drm] amdgpu: 16368M of VRAM memory ready [ 17.118582] [drm] amdgpu: 16368M of GTT memory ready. [ 17.118616] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 17.118717] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000). [ 17.118894] amdgpu 0000:07:00.0: irq 35 for MSI/MSI-X [ 17.219333] [drm] use_doorbell being set to: [true] [ 17.219537] [drm] use_doorbell being set to: [true] [ 17.414096] [drm] Found UVD firmware Version: 1.87 Family ID: 17 [ 17.414116] [drm] PSP loading UVD firmware [ 17.418020] [drm] Found VCE firmware Version: 55.7 Binary ID: 4 [ 17.418136] [drm] PSP loading VCE firmware [ 17.568387] [drm] reserve 0x400000 from 0xf400d00000 for PSP TMR SIZE [ 17.625867] [drm] Display Core initialized with v3.2.11! [ 17.654441] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 17.654445] [drm] Driver supports precise vblank timestamp query. [ 17.675779] [drm] UVD and UVD ENC initialized successfully. [ 17.776155] [drm] VCE initialized successfully. [ 17.800424] kfd kfd: Allocated 3969056 bytes on gart [ 17.800443] Virtual CRAT table created for GPU [ 17.800445] Parsing CRAT table with 1 nodes [ 17.800456] Creating topology SYSFS entries [ 17.800603] Topology: Add dGPU node [0x6861:0x1002] [ 17.800657] kfd kfd: added device 1002:6861 [ 17.801891] [drm] fb mappable at 0xD1100000 [ 17.801893] [drm] vram apper at 0xD0000000 [ 17.801895] [drm] size 9216000 [ 17.801896] [drm] fb depth is 24 [ 17.801897] [drm] pitch is 7680 [ 17.802044] fbcon: amdgpudrmfb (fb0) is primary device [ 17.843755] Console: switching to colour frame buffer device 240x75 [ 17.860496] amdgpu 0000:07:00.0: fb0: amdgpudrmfb frame buffer device [ 17.865291] amdgpu 0000:07:00.0: ring gfx uses VM inv eng 0 on hub 0 [ 17.865292] amdgpu 0000:07:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 17.865294] amdgpu 0000:07:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 17.865295] amdgpu 0000:07:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 17.865297] amdgpu 0000:07:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 17.865298] amdgpu 0000:07:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 17.865299] amdgpu 0000:07:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 17.865301] amdgpu 0000:07:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 17.865302] amdgpu 0000:07:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 17.865303] amdgpu 0000:07:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 17.865304] amdgpu 0000:07:00.0: ring sdma0 uses VM inv eng 0 on hub 1 [ 17.865306] amdgpu 0000:07:00.0: ring page0 uses VM inv eng 1 on hub 1 [ 17.865307] amdgpu 0000:07:00.0: ring sdma1 uses VM inv eng 4 on hub 1 [ 17.865308] amdgpu 0000:07:00.0: ring page1 uses VM inv eng 5 on hub 1 [ 17.865310] amdgpu 0000:07:00.0: ring uvd_0 uses VM inv eng 6 on hub 1 [ 17.865311] amdgpu 0000:07:00.0: ring uvd_enc_0.0 uses VM inv eng 7 on hub 1 [ 17.865312] amdgpu 0000:07:00.0: ring uvd_enc_0.1 uses VM inv eng 8 on hub 1 [ 17.865313] amdgpu 0000:07:00.0: ring vce0 uses VM inv eng 9 on hub 1 [ 17.865315] amdgpu 0000:07:00.0: ring vce1 uses VM inv eng 10 on hub 1 [ 17.865316] amdgpu 0000:07:00.0: ring vce2 uses VM inv eng 11 on hub 1 [ 17.865346] [drm] ECC is active. [ 17.872676] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:07:00.0 on minor 0 [ 22.151770] XFS (sda1): Ending clean mount [ 31.856881] XFS (dm-2): Mounting V5 Filesystem [ 34.669286] XFS (dm-2): Ending clean mount [ 35.087436] type=1305 audit(1548141119.574:4): audit_pid=955 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ 35.088239] RPC: Registered named UNIX socket transport module. [ 35.088242] RPC: Registered udp transport module. [ 35.088244] RPC: Registered tcp transport module. [ 35.088245] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 36.994739] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 37.018241] Ebtables v2.0 registered [ 37.059238] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 37.125054] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 37.152962] Netfilter messages via NETLINK v0.30. [ 37.157514] ip_set: protocol 6 [ 38.438390] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 38.581101] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 38.682225] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 38.682751] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 40.247594] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 40.247605] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO [ 40.247722] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 41.729415] tun: Universal TUN/TAP device driver, 1.6 [ 41.729419] tun: (C) 1999-2004 Max Krasnyansky [ 41.730981] virbr0: port 1(virbr0-nic) entered blocking state [ 41.730985] virbr0: port 1(virbr0-nic) entered disabled state [ 41.731029] device virbr0-nic entered promiscuous mode [ 41.838127] virbr0: port 1(virbr0-nic) entered blocking state [ 41.838133] virbr0: port 1(virbr0-nic) entered listening state [ 41.838182] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 41.900460] virbr0: port 1(virbr0-nic) entered disabled state [ 60.466110] fuse init (API version 7.22) [ 68.785816] rfkill: input handler disabled [ 142.349692] rfkill: input handler enabled [ 142.828006] rfkill: input handler disabled [ 153.242449] PM: Syncing filesystems ... done. [ 153.242527] PM: Preparing system for mem sleep [ 153.243384] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 153.244532] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 153.245541] PM: Entering mem sleep [ 153.245554] Suspending console(s) (use no_console_suspend to debug) [ 153.315184] i8042 kbd 00:02: System wakeup enabled by ACPI [ 153.315844] e1000e: EEE TX LPI TIMER: 00000011 [ 153.415541] sd 1:0:0:0: [sda] Synchronizing SCSI cache [ 153.415809] sd 1:0:0:0: [sda] Stopping disk [ 154.029688] PM: suspend of devices complete after 717.841 msecs [ 154.029944] PM: late suspend of devices complete after 0.253 msecs [ 154.063201] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 154.128604] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 154.139635] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 154.205563] PM: noirq suspend of devices complete after 175.616 msecs [ 154.206415] ACPI: Preparing to enter system sleep state S3 [ 154.209578] PM: Saving platform NVS memory [ 154.209606] Disabling non-boot CPUs ... [ 154.221129] Broke affinity for irq 30 [ 154.222158] smpboot: CPU 1 is now offline [ 154.238140] smpboot: CPU 2 is now offline [ 154.254056] smpboot: CPU 3 is now offline [ 154.256623] ACPI: Low-level resume complete [ 154.256739] PM: Restoring platform NVS memory [ 154.258204] Enabling non-boot CPUs ... [ 154.258253] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 154.261168] CPU1 is up [ 154.261188] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 154.264084] CPU2 is up [ 154.264103] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 154.267136] CPU3 is up [ 154.271113] ACPI: Waking up from system sleep state S3 [ 154.371907] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 154.437874] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 154.515339] PM: noirq resume of devices complete after 242.065 msecs [ 154.515534] PM: early resume of devices complete after 0.121 msecs [ 154.515616] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 154.515675] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X [ 154.515722] usb usb1: root hub lost power or was reset [ 154.515730] snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X [ 154.515873] usb usb2: root hub lost power or was reset [ 154.519652] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 154.519773] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 154.519894] i8042 kbd 00:02: System wakeup disabled by ACPI [ 154.519897] rtc_cmos 00:04: System wakeup disabled by ACPI [ 154.520194] snd_hda_intel 0000:07:00.1: irq 32 for MSI/MSI-X [ 154.526567] sd 1:0:0:0: [sda] Starting disk [ 154.658359] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X [ 154.823802] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 154.829838] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 154.834792] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 154.999463] ata3.00: configured for UDMA/100 [ 155.117809] firewire_core 0000:0b:05.0: rediscovered device fw0 [ 155.393807] usb 2-1.2: reset low-speed USB device number 4 using ehci-pci [ 155.595197] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000). [ 155.595210] [drm] PSP is resuming... [ 155.743632] [drm] reserve 0x400000 from 0xf400d00000 for PSP TMR SIZE [ 155.909839] usb 2-1.1: reset low-speed USB device number 3 using ehci-pci [ 156.285333] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 157.404715] [drm] UVD and UVD ENC initialized successfully. [ 157.505231] [drm] VCE initialized successfully. [ 157.505243] amdgpu 0000:07:00.0: ring gfx uses VM inv eng 0 on hub 0 [ 157.505245] amdgpu 0000:07:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 157.505246] amdgpu 0000:07:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 157.505248] amdgpu 0000:07:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 157.505249] amdgpu 0000:07:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 157.505250] amdgpu 0000:07:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 157.505252] amdgpu 0000:07:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 157.505253] amdgpu 0000:07:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 157.505254] amdgpu 0000:07:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 157.505256] amdgpu 0000:07:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 157.505257] amdgpu 0000:07:00.0: ring sdma0 uses VM inv eng 0 on hub 1 [ 157.505258] amdgpu 0000:07:00.0: ring page0 uses VM inv eng 1 on hub 1 [ 157.505259] amdgpu 0000:07:00.0: ring sdma1 uses VM inv eng 4 on hub 1 [ 157.505260] amdgpu 0000:07:00.0: ring page1 uses VM inv eng 5 on hub 1 [ 157.505262] amdgpu 0000:07:00.0: ring uvd_0 uses VM inv eng 6 on hub 1 [ 157.505263] amdgpu 0000:07:00.0: ring uvd_enc_0.0 uses VM inv eng 7 on hub 1 [ 157.505264] amdgpu 0000:07:00.0: ring uvd_enc_0.1 uses VM inv eng 8 on hub 1 [ 157.505265] amdgpu 0000:07:00.0: ring vce0 uses VM inv eng 9 on hub 1 [ 157.505267] amdgpu 0000:07:00.0: ring vce1 uses VM inv eng 10 on hub 1 [ 157.505268] amdgpu 0000:07:00.0: ring vce2 uses VM inv eng 11 on hub 1 [ 157.505297] [drm] ECC is active. [ 159.876868] ata1: link is slow to respond, please be patient (ready=0) [ 161.205974] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 161.216739] ata1.00: configured for UDMA/133 [ 161.274862] PM: resume of devices complete after 6759.325 msecs [ 161.275248] PM: Finishing wakeup. [ 161.275249] Restarting tasks ... done. [ 171.583658] rfkill: input handler enabled [ 171.877391] rfkill: input handler disabled [ 184.988230] usb 2-1.1: USB disconnect, device number 3 [ 185.199558] usb 2-1.1: new low-speed USB device number 5 using ehci-pci [ 185.294304] usb 2-1.1: New USB device found, idVendor=03f0, idProduct=0024 [ 185.294312] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 185.294317] usb 2-1.1: Product: HP Basic USB Keyboard [ 185.294321] usb 2-1.1: Manufacturer: CHICONY [ 185.300910] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input17 [ 185.352136] hid-generic 0003:03F0:0024.0003: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.1/input0 [ 688.256286] Key type dns_resolver registered [ 688.337694] Key type cifs.spnego registered [ 688.337699] Key type cifs.idmap registered [ 6001.198680] ata1.00: exception Emask 0x10 SAct 0x7fffffff SErr 0x4c0100 action 0x6 frozen [ 6001.198690] ata1.00: irq_stat 0x08000000, interface fatal error [ 6001.198696] ata1: SError: { UnrecovData CommWake 10B8B Handshk } [ 6001.198701] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.198714] ata1.00: cmd 61/00:00:e0:6f:47/04:00:21:00:00/40 tag 0 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198720] ata1.00: status: { DRDY } [ 6001.198724] ata1.00: failed command: READ FPDMA QUEUED [ 6001.198736] ata1.00: cmd 60/20:08:60:0d:af/00:00:08:00:00/40 tag 1 ncq 16384 in res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198742] ata1.00: status: { DRDY } [ 6001.198746] ata1.00: failed command: READ FPDMA QUEUED [ 6001.198757] ata1.00: cmd 60/20:10:88:0d:af/00:00:08:00:00/40 tag 2 ncq 16384 in res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198762] ata1.00: status: { DRDY } [ 6001.198766] ata1.00: failed command: READ FPDMA QUEUED [ 6001.198778] ata1.00: cmd 60/10:18:b0:0d:af/00:00:08:00:00/40 tag 3 ncq 8192 in res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198783] ata1.00: status: { DRDY } [ 6001.198787] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.198799] ata1.00: cmd 61/02:20:01:38:94/00:00:08:00:00/40 tag 4 ncq 1024 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198804] ata1.00: status: { DRDY } [ 6001.198808] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.198820] ata1.00: cmd 61/18:28:08:38:94/00:00:08:00:00/40 tag 5 ncq 12288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198825] ata1.00: status: { DRDY } [ 6001.198829] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.198840] ata1.00: cmd 61/00:30:38:f5:46/04:00:21:00:00/40 tag 6 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198845] ata1.00: status: { DRDY } [ 6001.198849] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.198861] ata1.00: cmd 61/00:38:38:f9:46/04:00:21:00:00/40 tag 7 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198866] ata1.00: status: { DRDY } [ 6001.198870] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.198881] ata1.00: cmd 61/00:40:e0:13:47/04:00:21:00:00/40 tag 8 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198887] ata1.00: status: { DRDY } [ 6001.198891] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.198902] ata1.00: cmd 61/00:48:e0:17:47/04:00:21:00:00/40 tag 9 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198907] ata1.00: status: { DRDY } [ 6001.198911] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.198923] ata1.00: cmd 61/00:50:e0:1b:47/04:00:21:00:00/40 tag 10 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198928] ata1.00: status: { DRDY } [ 6001.198932] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.198943] ata1.00: cmd 61/00:58:e0:1f:47/04:00:21:00:00/40 tag 11 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198948] ata1.00: status: { DRDY } [ 6001.198953] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.198964] ata1.00: cmd 61/00:60:e0:23:47/04:00:21:00:00/40 tag 12 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198969] ata1.00: status: { DRDY } [ 6001.198973] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.198985] ata1.00: cmd 61/00:68:e0:27:47/04:00:21:00:00/40 tag 13 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.198990] ata1.00: status: { DRDY } [ 6001.198994] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199005] ata1.00: cmd 61/00:70:e0:2b:47/04:00:21:00:00/40 tag 14 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199010] ata1.00: status: { DRDY } [ 6001.199014] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199026] ata1.00: cmd 61/00:78:e0:2f:47/04:00:21:00:00/40 tag 15 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199031] ata1.00: status: { DRDY } [ 6001.199035] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199047] ata1.00: cmd 61/00:80:e0:33:47/04:00:21:00:00/40 tag 16 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199052] ata1.00: status: { DRDY } [ 6001.199056] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199067] ata1.00: cmd 61/00:88:e0:37:47/04:00:21:00:00/40 tag 17 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199072] ata1.00: status: { DRDY } [ 6001.199076] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199088] ata1.00: cmd 61/00:90:e0:3b:47/04:00:21:00:00/40 tag 18 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199093] ata1.00: status: { DRDY } [ 6001.199097] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199109] ata1.00: cmd 61/00:98:e0:4f:47/04:00:21:00:00/40 tag 19 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199114] ata1.00: status: { DRDY } [ 6001.199118] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199129] ata1.00: cmd 61/00:a0:e0:53:47/04:00:21:00:00/40 tag 20 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199134] ata1.00: status: { DRDY } [ 6001.199138] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199150] ata1.00: cmd 61/00:a8:e0:57:47/04:00:21:00:00/40 tag 21 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199155] ata1.00: status: { DRDY } [ 6001.199159] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199170] ata1.00: cmd 61/00:b0:e0:5b:47/04:00:21:00:00/40 tag 22 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199175] ata1.00: status: { DRDY } [ 6001.199179] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199191] ata1.00: cmd 61/00:b8:e0:5f:47/04:00:21:00:00/40 tag 23 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199196] ata1.00: status: { DRDY } [ 6001.199200] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199211] ata1.00: cmd 61/00:c0:e0:63:47/04:00:21:00:00/40 tag 24 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199217] ata1.00: status: { DRDY } [ 6001.199221] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199232] ata1.00: cmd 61/00:c8:e0:67:47/04:00:21:00:00/40 tag 25 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199237] ata1.00: status: { DRDY } [ 6001.199241] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199253] ata1.00: cmd 61/00:d0:e0:3f:47/04:00:21:00:00/40 tag 26 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199258] ata1.00: status: { DRDY } [ 6001.199262] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199273] ata1.00: cmd 61/00:d8:e0:43:47/04:00:21:00:00/40 tag 27 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199278] ata1.00: status: { DRDY } [ 6001.199282] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199294] ata1.00: cmd 61/00:e0:e0:47:47/04:00:21:00:00/40 tag 28 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199299] ata1.00: status: { DRDY } [ 6001.199303] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199315] ata1.00: cmd 61/00:e8:e0:4b:47/04:00:21:00:00/40 tag 29 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199320] ata1.00: status: { DRDY } [ 6001.199324] ata1.00: failed command: WRITE FPDMA QUEUED [ 6001.199335] ata1.00: cmd 61/00:f0:e0:6b:47/04:00:21:00:00/40 tag 30 ncq 524288 out res 40/00:24:01:38:94/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [ 6001.199340] ata1.00: status: { DRDY } [ 6001.199347] ata1: hard resetting link [ 6001.503643] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6001.536067] ata1.00: configured for UDMA/133 [ 6001.536158] ata1: EH complete [ 6701.518535] SMAFIPcheckComm[8064]: segfault at 0 ip 00000000004073f9 sp 00007ffcf79876a0 error 4 in SMAFIPcheckCommType[400000+19b000] [ 7336.444683] perf: interrupt took too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [ 8230.273426] perf: interrupt took too long (3154 > 3145), lowering kernel.perf_event_max_sample_rate to 63000 [ 8988.968428] ata1.00: exception Emask 0x10 SAct 0x6000000 SErr 0x2c0100 action 0x6 frozen [ 8988.968434] ata1.00: irq_stat 0x08000000, interface fatal error [ 8988.968437] ata1: SError: { UnrecovData CommWake 10B8B BadCRC } [ 8988.968440] ata1.00: failed command: READ FPDMA QUEUED [ 8988.968446] ata1.00: cmd 60/10:c8:60:94:61/00:00:00:00:00/40 tag 25 ncq 8192 in res 40/00:d4:78:94:61/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 8988.968448] ata1.00: status: { DRDY } [ 8988.968450] ata1.00: failed command: READ FPDMA QUEUED [ 8988.968455] ata1.00: cmd 60/08:d0:78:94:61/00:00:00:00:00/40 tag 26 ncq 4096 in res 40/00:d4:78:94:61/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 8988.968458] ata1.00: status: { DRDY } [ 8988.968462] ata1: hard resetting link [ 8989.324416] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8989.356266] ata1.00: configured for UDMA/133 [ 8989.356315] ata1: EH complete [ 9763.896890] perf: interrupt took too long (3945 > 3942), lowering kernel.perf_event_max_sample_rate to 50000 [10602.355841] amdgpu 0000:07:00.0: ffff9fdbc0fc9800 pin failed [10602.355921] [drm:dm_plane_helper_prepare_fb [amdgpu]] *ERROR* Failed to pin framebuffer with error -12 [12581.327322] ata1.00: exception Emask 0x10 SAct 0x7fc01003 SErr 0x4c0100 action 0x6 frozen [12581.327328] ata1.00: irq_stat 0x08000000, interface fatal error [12581.327331] ata1: SError: { UnrecovData CommWake 10B8B Handshk } [12581.327333] ata1.00: failed command: WRITE FPDMA QUEUED [12581.327339] ata1.00: cmd 61/c0:00:f8:43:e5/00:00:1f:00:00/40 tag 0 ncq 98304 out res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327341] ata1.00: status: { DRDY } [12581.327343] ata1.00: failed command: READ FPDMA QUEUED [12581.327348] ata1.00: cmd 60/40:08:40:a3:a2/00:00:00:00:00/40 tag 1 ncq 32768 in res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327351] ata1.00: status: { DRDY } [12581.327424] ata1.00: failed command: READ FPDMA QUEUED [12581.327429] ata1.00: cmd 60/10:60:70:eb:fc/00:00:00:00:00/40 tag 12 ncq 8192 in res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327432] ata1.00: status: { DRDY } [12581.327434] ata1.00: failed command: WRITE FPDMA QUEUED [12581.327439] ata1.00: cmd 61/00:b0:e0:23:e5/04:00:1f:00:00/40 tag 22 ncq 524288 out res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327441] ata1.00: status: { DRDY } [12581.327443] ata1.00: failed command: WRITE FPDMA QUEUED [12581.327448] ata1.00: cmd 61/00:b8:e0:27:e5/04:00:1f:00:00/40 tag 23 ncq 524288 out res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327450] ata1.00: status: { DRDY } [12581.327451] ata1.00: failed command: WRITE FPDMA QUEUED [12581.327456] ata1.00: cmd 61/00:c0:e0:2b:e5/04:00:1f:00:00/40 tag 24 ncq 524288 out res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327458] ata1.00: status: { DRDY } [12581.327460] ata1.00: failed command: WRITE FPDMA QUEUED [12581.327465] ata1.00: cmd 61/00:c8:e0:2f:e5/04:00:1f:00:00/40 tag 25 ncq 524288 out res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327467] ata1.00: status: { DRDY } [12581.327469] ata1.00: failed command: WRITE FPDMA QUEUED [12581.327474] ata1.00: cmd 61/00:d0:e0:33:e5/04:00:1f:00:00/40 tag 26 ncq 524288 out res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327476] ata1.00: status: { DRDY } [12581.327478] ata1.00: failed command: WRITE FPDMA QUEUED [12581.327483] ata1.00: cmd 61/00:d8:e0:37:e5/04:00:1f:00:00/40 tag 27 ncq 524288 out res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327485] ata1.00: status: { DRDY } [12581.327487] ata1.00: failed command: WRITE FPDMA QUEUED [12581.327492] ata1.00: cmd 61/18:e0:e0:3b:e5/00:00:1f:00:00/40 tag 28 ncq 12288 out res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327494] ata1.00: status: { DRDY } [12581.327496] ata1.00: failed command: WRITE FPDMA QUEUED [12581.327501] ata1.00: cmd 61/00:e8:f8:3b:e5/04:00:1f:00:00/40 tag 29 ncq 524288 out res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327503] ata1.00: status: { DRDY } [12581.327505] ata1.00: failed command: WRITE FPDMA QUEUED [12581.327509] ata1.00: cmd 61/00:f0:f8:3f:e5/04:00:1f:00:00/40 tag 30 ncq 524288 out res 40/00:0c:40:a3:a2/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [12581.327512] ata1.00: status: { DRDY } [12581.327515] ata1: hard resetting link [12581.632300] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [12581.644471] ata1.00: configured for UDMA/133 [12581.644526] ata1: EH complete [12857.536567] ata1.00: exception Emask 0x10 SAct 0x7fffffff SErr 0x4c0100 action 0x6 frozen [12857.536574] ata1.00: irq_stat 0x08000000, interface fatal error [12857.536578] ata1: SError: { UnrecovData CommWake 10B8B Handshk } [12857.536582] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536591] ata1.00: cmd 61/f8:00:70:ed:4a/03:00:20:00:00/40 tag 0 ncq 520192 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536595] ata1.00: status: { DRDY } [12857.536597] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536605] ata1.00: cmd 61/00:08:68:f1:4a/04:00:20:00:00/40 tag 1 ncq 524288 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536609] ata1.00: status: { DRDY } [12857.536611] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536619] ata1.00: cmd 61/00:10:68:f5:4a/04:00:20:00:00/40 tag 2 ncq 524288 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536623] ata1.00: status: { DRDY } [12857.536625] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536633] ata1.00: cmd 61/00:18:68:f9:4a/04:00:20:00:00/40 tag 3 ncq 524288 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536636] ata1.00: status: { DRDY } [12857.536639] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536647] ata1.00: cmd 61/58:20:28:e4:4a/01:00:20:00:00/40 tag 4 ncq 176128 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536650] ata1.00: status: { DRDY } [12857.536653] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536660] ata1.00: cmd 61/f0:28:68:fd:4a/03:00:20:00:00/40 tag 5 ncq 516096 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536664] ata1.00: status: { DRDY } [12857.536666] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536674] ata1.00: cmd 61/e8:30:58:01:4b/03:00:20:00:00/40 tag 6 ncq 512000 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536677] ata1.00: status: { DRDY } [12857.536680] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536688] ata1.00: cmd 61/00:38:40:05:4b/04:00:20:00:00/40 tag 7 ncq 524288 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536691] ata1.00: status: { DRDY } [12857.536694] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536701] ata1.00: cmd 61/f8:40:40:09:4b/03:00:20:00:00/40 tag 8 ncq 520192 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536705] ata1.00: status: { DRDY } [12857.536707] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536715] ata1.00: cmd 61/f0:48:38:0d:4b/03:00:20:00:00/40 tag 9 ncq 516096 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536719] ata1.00: status: { DRDY } [12857.536721] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536729] ata1.00: cmd 61/f8:50:28:11:4b/03:00:20:00:00/40 tag 10 ncq 520192 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536733] ata1.00: status: { DRDY } [12857.536735] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536743] ata1.00: cmd 61/f8:58:20:15:4b/03:00:20:00:00/40 tag 11 ncq 520192 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536746] ata1.00: status: { DRDY } [12857.536749] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536757] ata1.00: cmd 61/f0:60:18:19:4b/03:00:20:00:00/40 tag 12 ncq 516096 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536760] ata1.00: status: { DRDY } [12857.536763] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536770] ata1.00: cmd 61/00:68:08:1d:4b/04:00:20:00:00/40 tag 13 ncq 524288 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536774] ata1.00: status: { DRDY } [12857.536776] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536784] ata1.00: cmd 61/00:70:08:21:4b/04:00:20:00:00/40 tag 14 ncq 524288 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536787] ata1.00: status: { DRDY } [12857.536790] ata1.00: failed command: READ FPDMA QUEUED [12857.536798] ata1.00: cmd 60/40:78:c0:97:58/00:00:00:00:00/40 tag 15 ncq 32768 in res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536801] ata1.00: status: { DRDY } [12857.536804] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536812] ata1.00: cmd 61/f8:80:08:25:4b/03:00:20:00:00/40 tag 16 ncq 520192 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536815] ata1.00: status: { DRDY } [12857.536818] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536826] ata1.00: cmd 61/f8:88:00:29:4b/03:00:20:00:00/40 tag 17 ncq 520192 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536829] ata1.00: status: { DRDY } [12857.536832] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536839] ata1.00: cmd 61/98:90:10:ca:4a/03:00:20:00:00/40 tag 18 ncq 471040 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536843] ata1.00: status: { DRDY } [12857.536845] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536853] ata1.00: cmd 61/f8:98:a8:cd:4a/03:00:20:00:00/40 tag 19 ncq 520192 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536856] ata1.00: status: { DRDY } [12857.536859] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536867] ata1.00: cmd 61/80:a0:a0:d1:4a/03:00:20:00:00/40 tag 20 ncq 458752 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536870] ata1.00: status: { DRDY } [12857.536873] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536881] ata1.00: cmd 61/90:a8:20:d5:4a/00:00:20:00:00/40 tag 21 ncq 73728 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536884] ata1.00: status: { DRDY } [12857.536887] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536894] ata1.00: cmd 61/10:b0:b0:d5:4a/01:00:20:00:00/40 tag 22 ncq 139264 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536898] ata1.00: status: { DRDY } [12857.536900] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536908] ata1.00: cmd 61/f8:b8:c0:d6:4a/00:00:20:00:00/40 tag 23 ncq 126976 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536911] ata1.00: status: { DRDY } [12857.536914] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536922] ata1.00: cmd 61/78:c0:b8:d7:4a/03:00:20:00:00/40 tag 24 ncq 454656 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536925] ata1.00: status: { DRDY } [12857.536928] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536935] ata1.00: cmd 61/f8:c8:30:db:4a/01:00:20:00:00/40 tag 25 ncq 258048 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536939] ata1.00: status: { DRDY } [12857.536942] ata1.00: failed command: READ FPDMA QUEUED [12857.536949] ata1.00: cmd 60/00:d0:60:42:3d/01:00:21:00:00/40 tag 26 ncq 131072 in res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536953] ata1.00: status: { DRDY } [12857.536955] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536963] ata1.00: cmd 61/f8:d8:28:dd:4a/03:00:20:00:00/40 tag 27 ncq 520192 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536966] ata1.00: status: { DRDY } [12857.536969] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536977] ata1.00: cmd 61/08:e0:20:e1:4a/03:00:20:00:00/40 tag 28 ncq 397312 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536980] ata1.00: status: { DRDY } [12857.536983] ata1.00: failed command: WRITE FPDMA QUEUED [12857.536990] ata1.00: cmd 61/f0:e8:80:e5:4a/03:00:20:00:00/40 tag 29 ncq 516096 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.536994] ata1.00: status: { DRDY } [12857.536996] ata1.00: failed command: WRITE FPDMA QUEUED [12857.537004] ata1.00: cmd 61/00:f0:70:e9:4a/04:00:20:00:00/40 tag 30 ncq 524288 out res 40/00:84:08:25:4b/00:00:20:00:00/40 Emask 0x10 (ATA bus error) [12857.537008] ata1.00: status: { DRDY } [12857.537013] ata1: hard resetting link [12857.994622] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [12858.024655] ata1.00: configured for UDMA/133 [12858.024760] ata1: EH complete [13600.131944] amdgpu 0000:07:00.0: ffff9fdbc0fc9800 pin failed [13600.132113] [drm:dm_plane_helper_prepare_fb [amdgpu]] *ERROR* Failed to pin framebuffer with error -12 [13696.926035] amdgpu 0000:07:00.0: ffff9fdbc0fc9800 pin failed [13696.926110] [drm:dm_plane_helper_prepare_fb [amdgpu]] *ERROR* Failed to pin framebuffer with error -12 [15045.974188] TCP: lp registered [15756.003227] rfkill: input handler enabled [15790.999787] usb 2-1.2: USB disconnect, device number 4 [15792.456067] usb 2-1.2: new low-speed USB device number 6 using ehci-pci [15792.549197] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=094a [15792.549202] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [15792.549205] usb 2-1.2: Product: HP USB Optical Mouse [15792.549207] usb 2-1.2: Manufacturer: PixArt [15792.551531] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input18 [15792.551805] hid-generic 0003:03F0:094A.0004: input,hidraw1: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0 [15891.896740] rfkill: input handler disabled [18106.775150] usb 2-1.1: USB disconnect, device number 5 [18107.141037] usb 2-1.1: new low-speed USB device number 7 using ehci-pci [18107.241940] usb 2-1.1: New USB device found, idVendor=03f0, idProduct=0024 [18107.241945] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [18107.241947] usb 2-1.1: Product: HP Basic USB Keyboard [18107.241949] usb 2-1.1: Manufacturer: CHICONY [18107.249069] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input19 [18107.301352] hid-generic 0003:03F0:0024.0005: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.1/input0 [30542.214282] perf: interrupt took too long (4966 > 4931), lowering kernel.perf_event_max_sample_rate to 40000 [38398.949155] amdgpu 0000:07:00.0: ffff9fdbc0fc9800 pin failed [38398.949229] [drm:dm_plane_helper_prepare_fb [amdgpu]] *ERROR* Failed to pin framebuffer with error -12