[Beignet] [PATCH] intel: Export total subslice and EU counts

[Damien Lespiau]

On Mon, Mar 02, 2015 at 03:39:27PM -0800, jeff.mcgee at intel.com wrote:
> From: Jeff McGee <jeff.mcgee at intel.com>

2 small details, but otherwise:

Reviewed-by: Damien Lespiau <damien.lespiau at intel.com>


> Update kernel interface with new I915_GETPARAM ioctl entries for
> subslice total and EU total. Add a wrapping function for each
> parameter. Userspace drivers need these values when constructing
> GPGPU commands. This kernel query method is intended to replace
> the PCI ID-based tables that userspace drivers currently maintain.
> The kernel driver can employ fuse register reads as needed to
> ensure the most accurate determination of GT config attributes.
> This first became important with Cherryview in which the config
> could differ between devices with the same PCI ID.
> 
> The kernel detection of these values is device-specific. Userspace
> drivers should continue to maintain ID-based tables for older
> devices which return ENODEV when using this query.

This should probably part of some comment near the API entry point.

> 
> For: VIZ-4636
> Signed-off-by: Jeff McGee <jeff.mcgee at intel.com>
> ---
>  include/drm/i915_drm.h   |  2 ++
>  intel/intel_bufmgr.h     |  4 ++++
>  intel/intel_bufmgr_gem.c | 31 +++++++++++++++++++++++++++++++
>  3 files changed, 37 insertions(+)
> 
> diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
> index 15dd01d..e34f5b2 100644
> --- a/include/drm/i915_drm.h
> +++ b/include/drm/i915_drm.h
> @@ -340,6 +340,8 @@ typedef struct drm_i915_irq_wait {
>  #define I915_PARAM_HAS_EXEC_HANDLE_LUT   26
>  #define I915_PARAM_HAS_WT     	 	 27
>  #define I915_PARAM_CMD_PARSER_VERSION	 28
> +#define I915_PARAM_SUBSLICE_TOTAL	 32
> +#define I915_PARAM_EU_TOTAL		 33
>  
>  typedef struct drm_i915_getparam {
>  	int param;
> diff --git a/intel/intel_bufmgr.h b/intel/intel_bufmgr.h
> index be83a56..4b2472e 100644
> --- a/intel/intel_bufmgr.h
> +++ b/intel/intel_bufmgr.h
> @@ -37,6 +37,7 @@
>  #include <stdio.h>
>  #include <stdint.h>
>  #include <stdio.h>
> +#include <stdbool.h>

But you don't seem to use bool or _Bool in the rest of the patch?

>  struct drm_clip_rect;
>  
> @@ -264,6 +265,9 @@ int drm_intel_get_reset_stats(drm_intel_context *ctx,
>  			      uint32_t *active,
>  			      uint32_t *pending);
>  
> +int drm_intel_get_subslice_total(int fd, unsigned int *subslice_total);
> +int drm_intel_get_eu_total(int fd, unsigned int *eu_total);
> +
>  /** @{ Compatibility defines to keep old code building despite the symbol rename
>   * from dri_* to drm_intel_*
>   */
> diff --git a/intel/intel_bufmgr_gem.c b/intel/intel_bufmgr_gem.c
> index 78875fd..2d77f32 100644
> --- a/intel/intel_bufmgr_gem.c
> +++ b/intel/intel_bufmgr_gem.c
> @@ -3292,6 +3292,37 @@ drm_intel_reg_read(drm_intel_bufmgr *bufmgr,
>  	return ret;
>  }
>  
> +drm_public int
> +drm_intel_get_subslice_total(int fd, unsigned int *subslice_total)
> +{
> +	drm_i915_getparam_t gp;
> +	int ret;
> +
> +	memclear(gp);
> +	gp.value = (int*)subslice_total;
> +	gp.param = I915_PARAM_SUBSLICE_TOTAL;
> +	ret = drmIoctl(fd, DRM_IOCTL_I915_GETPARAM, &gp);
> +	if (ret)
> +		return -errno;
> +
> +	return 0;
> +}
> +
> +drm_public int
> +drm_intel_get_eu_total(int fd, unsigned int *eu_total)
> +{
> +	drm_i915_getparam_t gp;
> +	int ret;
> +
> +	memclear(gp);
> +	gp.value = (int*)eu_total;
> +	gp.param = I915_PARAM_EU_TOTAL;
> +	ret = drmIoctl(fd, DRM_IOCTL_I915_GETPARAM, &gp);
> +	if (ret)
> +		return -errno;
> +
> +	return 0;
> +}
>  
>  /**
>   * Annotate the given bo for use in aub dumping.
> -- 
> 2.3.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel