[Beignet] [PATCH] Docs: Spelling and grammar fixes
Rebecca N. Palmer
rebecca_palmer at zoho.com
Sat Oct 8 13:10:46 UTC 2016
Signed-off-by: Rebecca N. Palmer <rebecca_palmer at zoho.com>
---
docs/Beignet.mdwn | 20 ++++++++++----------
docs/howto/cross-compiler-howto.mdwn | 4 ++--
docs/howto/stand-alone-utest-howto.mdwn | 8 ++++----
utests/builtin_global_linear_id.cpp | 2 +-
4 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/docs/Beignet.mdwn b/docs/Beignet.mdwn
index 8f6f95c..64d33dc 100644
--- a/docs/Beignet.mdwn
+++ b/docs/Beignet.mdwn
@@ -16,7 +16,7 @@ News
Prerequisite
------------
-The project depends on the following external libaries:
+The project depends on the following external libraries:
- libdrm libraries (libdrm and libdrm\_intel)
- Various LLVM components
@@ -33,7 +33,7 @@ you can still link to the beignet OpenCL library. You can find the beignet/libcl
in your system's library installation directories.
Note that the compiler depends on LLVM (Low-Level Virtual Machine project), and the
-project normally support 3 latest LLVM released version.
+project normally supports the 3 latest LLVM released versions.
Right now, the code has been compiled with LLVM 3.6, 3.7 and 3.8. With older
version LLVM from 3.3, build still support, but no full tests cover.
@@ -48,11 +48,11 @@ A simple command to install all the above dependencies for ubuntu or debian is:
**The recommended LLVM/CLANG version is 3.6 and/or 3.7**
-Based on our test result, LLVM 3.6 and 3.7 has best pass rate on all the test suites. Compare
+Based on our test result, LLVM 3.6 and 3.7 has the best pass rate on all the test suites. Compared
to LLVM 3.6 and 3.7, if you used LLVM 3.8, you should pay attention to float immediate. For example,
-if you use 1.0 in the kernel, LLVM 3.6 will treate it as 1.0f, a single float, because the project
-don't support double float. but LLVM 3.8 will treate it as 1.0, a double foat, at the last it may cause
-error. So we recommend use 1.0f instead of 1.0 if you don't need double float.
+if you use 1.0 in the kernel, LLVM 3.6 will treat it as 1.0f, a single float, because the project
+doesn't support double float. but LLVM 3.8 will treat it as 1.0, a double float, at the last it may cause
+error. So we recommend using 1.0f instead of 1.0 if you don't need double float.
For LLVM 3.4 and 3.5, Beignet still support them, but it may be limited to support the
build and major functions.
@@ -112,12 +112,12 @@ It installs the OCL icd vendor files to /etc/OpenCL/vendors, if the system suppo
`> make package`
-It packages the driver binaries, you may copy&install the package to another machine with simillar system.
+It packages the driver binaries, you may copy&install the package to another machine with similar system.
How to run
----------
-After build and install of beignet, you may need to check whether it works on your
+After building and installing Beignet, you may need to check whether it works on your
platform. Beignet also produces various tests to ensure the compiler and the run-time
consistency. This small test framework uses a simple c++ registration system to
register all the unit tests.
@@ -173,7 +173,7 @@ Known Issues
`# echo -n 0 > /sys/module/i915/parameters/enable_hangcheck`
- But this command is a little bit dangerous, as if your kernel really hang, then the gpu will lock up
+ But this command is a little bit dangerous, as if your kernel really hangs, then the GPU will lock up
forever until a reboot.
* "Beignet: self-test failed" and almost all unit tests fail.
@@ -207,7 +207,7 @@ Known Issues
`# export OCL_STRICT_CONFORMANCE=0`.
- This would lost some precision but gain performance.
+ This loses some precision but gains performance.
* cl\_khr\_gl\_sharing.
This extension highly depends on mesa support. It seems that mesa would not provide
diff --git a/docs/howto/cross-compiler-howto.mdwn b/docs/howto/cross-compiler-howto.mdwn
index d541816..a8a696d 100644
--- a/docs/howto/cross-compiler-howto.mdwn
+++ b/docs/howto/cross-compiler-howto.mdwn
@@ -2,7 +2,7 @@ Cross Compiler HowTo
====================
Beignet supports both PC devices with full profile and embedded/handheld
-devices with embeded profile. This document describes how to build Beignet
+devices with embedded profile. This document describes how to build Beignet
and OpenCL kernels for a target machine (embedded/handheld devices) in a
host machine with the help of cross compiler, and also the large-size-reduced
Beignet driver package for the target machine.
@@ -65,7 +65,7 @@ provide only the OpenCL runtime library without OpenCL compiler, and only the
executable binary kernel is supported on such devices.
It means that just distribute libcl.so and libgbeinterp.so (~320k in total after strip)
-are enough for OpenCL embeded profile in the target machine. The whole Beignet
+are enough for OpenCL embedded profile in the target machine. The whole Beignet
driver set can be separated into several packages for different usage.
diff --git a/docs/howto/stand-alone-utest-howto.mdwn b/docs/howto/stand-alone-utest-howto.mdwn
index bca23d3..ddd8c5e 100644
--- a/docs/howto/stand-alone-utest-howto.mdwn
+++ b/docs/howto/stand-alone-utest-howto.mdwn
@@ -1,14 +1,14 @@
Stand Alone Unit Test HowTo
====================
-Beignet provides an independent unit test suite covered most OpenCL language feautures,
+Beignet provides an independent unit test suite covering most OpenCL language features,
including more than 800 cases which could run in a few minutes, it should be useful for
testing and comparing different OpenCL implementations.
Prerequisite
------------
-OpenCL ICD. Please check your OpenCL ICD existance by command
+OpenCL ICD. Please check your OpenCL ICD existence by command
`pkg-config --libs OpenCL`.
Build Stand Alone Unit Test
@@ -27,7 +27,7 @@ Basically, from the root directory of the project
`> make`
-Once built, the 'utest_run' is generated in currenty directory.
+Once built, the 'utest_run' is generated in current directory.
How to run
----------
@@ -42,4 +42,4 @@ Then in `utests/`:
`> ./utest_run`
if the utest_run fail to run, please check /etc/vendors/OpenCL to confirm it calls the expected
-OpenCL driver, or export LD_LIBRARAY_PATH to establish the correct link.
+OpenCL driver, or export LD_LIBRARY_PATH to establish the correct link.
diff --git a/utests/builtin_global_linear_id.cpp b/utests/builtin_global_linear_id.cpp
index cda7e84..24e1d2e 100644
--- a/utests/builtin_global_linear_id.cpp
+++ b/utests/builtin_global_linear_id.cpp
@@ -61,7 +61,7 @@ static void builtin_global_linear_id(void)
err = clEnqueueNDRangeKernel(queue, kernel, dim, offsets, globals, locals, 0, NULL, NULL);
if (err != CL_SUCCESS)
{
- printf("Error: Failed to excute kernel! %d\n", err);
+ printf("Error: Failed to execute kernel! %d\n", err);
exit(1);
}
--
2.1.4
More information about the Beignet
mailing list